How to disassemble and assemble the aluminum gusset plate of the bathroom ceiling

BathroomCeiling aluminum gussetThe disassembly and assembly methods are as follows:

1. If the bathroom uses an aluminum plate as the ceiling material, and you want to disassemble it, first disassemble it from one of them, and it is best to prepare a suction cup, stick the suction cup to the corner of the aluminum gusset, and then pull it down hard. One of the corners will be warped, and the gusset can be removed as a whole.

2. If there is no suction cup, you can insert it into the gap of the gusset through the wire or knife, and then slowly pry it down, pry one of the pieces open first, and then slowly disassemble the other gusset. If you use a suction cup, it will be more convenient and relaxed.

3. Then reinstall it. Before installation, it is necessary to measure the area in combination with the design drawings, including the height of the installation. Through the ink fountain.

Pop out the horizontal line, bury the wires, etc. Hang the light steel keel, buckle into the triangular keel through the buckle, and then press the aluminum gusset into the gap of the triangular keel.

The steps of disassembling and assembling the aluminum gusset plate of the bathroom ceiling are as follows: disassembly: 1

Turn off the power in the bathroom first to avoid electric shock accidents. Bring 2Use a ladder or pedal to climb up and find the aluminum gusset that needs to be removed.

3.Using a flat tool, such as a screwdriver or flat spatula, gently insert one side of the aluminum gusset into the gap between the gusset and pull down firmly until the aluminum gusset comes off the gusset. 4.

Repeat the above steps until all the aluminum plates that need to be removed have been removed. Installation:1

Insert one side of the aluminum gusset into the gap of the gusset, and then push up firmly until the aluminum gusset is buckled on the gusset. 2.Repeat the above steps until all the aluminum gussets are installed.

3.Check that all aluminum gussets are secure, and if there are loose places, they need to be reinstalled. 4.

Turn on the power in the bathroom and check if the lights are working. Notes:1

When removing or installing the aluminum gusset, pay attention to safety to avoid accidents. 2.When disassembling the aluminum gusset, pull it down gently to avoid damaging the aluminum gusset or gusset.

3.When installing the aluminum gusset, make sure that the aluminum gusset is aligned with the gap of the gusset so as not to affect the appearance.

The square aluminum gusset ceiling of the bathroom is dismantled with suction cups, and the strip aluminum gusset ceiling is dismantled by priing the gap with iron sheets.

1. Square aluminum gusset plate

When disassembling the square aluminum gusset in the bathroom, we can use a suction cup to stick to a corner of the aluminum gusset, and then pull the corner of the aluminum gusset to make it warped, and the other corners of the aluminum gusset are also in turn according to this method, the aluminum gusset can be easily disassembled, and this method of disassembling the square aluminum gusset will not scratch the ceiling, and it is simpler.

2. Strip-shaped aluminum buckle plate

When disassembling the strip aluminum buckle, you need to find the last installed aluminum buckle plate, and then use a thin iron sheet to gently scratch the glass glue between the edge banding strip and the tile, and then insert it into the gap of the edge banding, scratch back and forth, after determining the position, pry down hard, and when we pry the strip aluminum buckle plate, we must pry the middle first. Finally, the aluminum gusset can be removed from the side in turn.

How to do bathroom ceilings

1. Before installation, the location should be clear, the area of the ceiling should be measured clearly, and the installation position of electrical appliances and keels should be clarified. And there are certain requirements for the height of the ceiling, the height is usually between meters, and the place where the ceiling needs to be installed needs to be dealt with, and the floating dust and obstacles on the surface must be cleaned.

2. After the installation position and height are determined, the surface treatment should be smoothed, and the horizontal installation angle should be fixed, and the corner of the ceiling should be collaged neatly, and no obvious gaps should be left.

3. After the preparation is done, it is necessary to determine the installation position of the keel, and it is necessary to use a percussion drill to punch holes in the ceiling. It is cut to a specific length, then the boom screw is assembled and it is firmly fixed in the drilled hole. When drilling, it is necessary to keep the spacing of the voids, and the spacing should not be too large or too small, otherwise it will affect the keel installation.

4. After the punching is completed, you can start to install the keel, install the main keel on the fixed ring below the boom, and fix the triangular keel on the main keel. After installation, it should be properly adjusted, and then tighten the screws at the connection to ensure that the main keel can be installed firmly and flat.

1. First of all, if you want to remove the gusset, you should know how to install it, as shown in the following figure:

2. If you want to do it yourself, you can buy a suction cup first.

3. Use the suction cup to stick to a corner of the square, and then pull the corner of the aluminum buckle plate hard, and the other three corners can be disassembled in the same way, which can effectively remove the labor cost of dismantling and grinding.

4. The glass glue can be cut with a utility knife, and then sealed with glue when installed.

When decorating the bathroom, many people will use aluminum gusset ceilings, and aluminum gusset ceilings are easy to break after a long time, so they should be disassembled and replaced in time. So how to dismantle the aluminum gusset ceiling of the toilet? What are the precautions for dismantling the aluminum gusset ceiling?

To disassemble according to the type of ceiling, if it is a square aluminum gusset ceiling, you need to use a suction cup to stick to the corner of the square, and pull hard to warp. If it is a strip-shaped aluminum gusset ceiling, you can use a wallpaper knife to insert it along the gap, and then find the position of the clip, and gently pry it down.

What are the precautions for dismantling the aluminum gusset ceiling:

1. When dismantling the aluminum gusset ceiling, it is necessary to disassemble it as much as possible, and do not retain the structure of the original ceiling, especially the structure of the ceiling bearing the components such as the boom and pendant in the original ceiling, which should be removed in time, so as to facilitate the subsequent construction.

2. When dismantling the aluminum gusset ceiling, you should first turn off the main valve of the power supply of the home decoration, and the circuit pipeline in the original ceiling should be removed as much as possible, and do not continue to use it in order to save money, because the circuit in the original ceiling has been destroyed and has no use value, so it can not be continued to use, otherwise it is easy to be dangerous, affecting the safety of your family and your own life.

3. When the grinding chain is dismantled from the aluminum gusset ceiling, brute force can not be used, and the safety of the equipment and equipment in the original ceiling should be considered.

4. When disassembling the aluminum gusset ceiling in the kitchen and bathroom, it is necessary to prevent damage to the ventilation duct and flue to avoid subsequent troubles.

Article summary: Good boy, how to dismantle the aluminum gusset ceiling for the toilet and what are the precautions for dismantling the aluminum gusset ceiling are introduced here, friends who need more information, please continue to pay attention to Qeeka Home, and we will have better and more exciting content for you in the future.

The installation of the aluminum gusset plate of the bathroom ceiling generally needs to go through the following steps:

Prepare tools and materials: Before the installation of sail bend, you need to prepare materials and tools such as impact drills, screwdrivers, scissors, aluminum gussets, keels, sealants, etc.

Measurement and planning: According to the size and shape of the bathroom, measure the size and area of the required aluminum gusset, and plan the installation position and shape of the aluminum gusset.

Installation keel: install the keel on the top of the bathroom, the keel is usually made of light steel keel, and you need to pay attention to the structural firmness and stability of the keel when installing.

Install the aluminum gusset: cut the aluminum gusset into the desired shape and size, and then install it according to the planned installation location. It is usually necessary to fix the aluminum gusset plate on the keel, using screws.

The bathroom is an indispensable room in our lives, so the installation of the bathroom ceiling is also very important. The following is about the installation method of the aluminum gusset ceiling in the bathroom:

1.Determine the size and number of suspended ceilings: according to the area and actual needs of the bathroom, measure the size and number of suspended ceilings.

2.Prepare materials: purchase aluminum gusset materials, suction cups, drywall nails, hooks, measuring tools.

3.Clean up the work area and remove the original suspended ceiling.

4.Draw the installation position of the ceiling: according to the size and number of the ceiling, draw the installation position and spacing of the ceiling with a rope or line pencil to ensure the accurate installation of the ceiling.

5.Install the hook: Insert the suction cup, and grind the hook through the place of the suction cup to fix it on the wall, making sure that the hook is on the same horizontal line.

6.Install the aluminum buckle plate: according to the determined size and quantity, according to the spacing on the hook, the aluminum buckle plate is fixed on the hook, and the spacing between the upper and lower plates is generally not more than 5mm, so that the lamps can be installed in the later stage.

7.Install the lamps: After the aluminum gusset is installed, according to the size and position of the lamps, make holes in the reserved positions to install the lamps. Once the fixtures are installed, they are ready for subsequent aesthetic treatment and cleaning.

In short, the installation of the aluminum gusset of the bathroom ceiling requires us to consider and measure it comprehensively and accurately, pay attention to the quality and service life of the aluminum gusset, so as to ensure the aesthetics of the ceiling and the long-term use effect.