How to disassemble and assemble the ceiling gusset for changing the toilet light?

1. Square aluminum gusset: You can use a very thin blade tip to gently insert the corner gap of the gusset plate, try to move it down, dial a little bit, dial the other diagonal side of the gusset plate in the same way, and then dial the diagonal edge of the other pair of sides, repeat several times, you can disassemble the square aluminum gusset.

2. Square aluminum gusset: The removal of the square aluminum gusset can also be pulled down from the edge with a suction cup, or pry down from the edge with a small flathead screwdriver.

3. Long aluminum buckle plate: The long aluminum buckle plate can be removed from the last board, and then removed in turn.

4. Long aluminum buckle plate: The long single buckle aluminum buckle plate can be pry down the edge of the single piece with a small slotted screwdriver, and the single piece of the buckle plate can be removed individually.

Precautions when removing the aluminum gusset:

1. Overall demolition.

When the original aluminum gusset is removed, it is necessary to completely dismantle, do not retain the original ceiling decoration, especially the boom in the ceiling, pendants and other structures that carry the weight of the ceiling must be removed, and this is removed to take into account the safety issues in the future.

2. Circuit safety.

When removing the gusset, all power should be cut off first, and the electrical wiring in the original ceiling should be removed as much as possible.

3. Protect other objects.

When removing the ceiling, it is easy to touch other objects in the room, so the safety of the equipment and facilities in the original ceiling should be considered when dismantling, and attention should be paid to avoid damaging the ventilation duct and flue.

4. Pay attention to safety.

When removing the ceiling, you should wear a safety helmet to avoid falling and smashing the ceiling, and at the same time, when removing the gypsum board ceiling, it will cut off the light steel keel inside, so you must avoid hand injuries, and it is best to wear gloves to operate. At the same time, the dismantled ceiling must be stacked well to avoid dumping and hurting people.

Aluminum gusset plate, prepare a few suction cups or sticky hooks before disassembly. Then use a suction cup to stick to the aluminum gusset next to the lamp, and pull it down hard to remove the gusset. After removing one piece, gently remove the adjacent pieces around it, so that there will be enough space to replace the lighting.

In addition to suction cups, insert tools such as blades, steel rulers or iron sheets into the gap between the two ceilings, and then gently pry open along the gap to remove the gusset.

If it is a square aluminum gusset, you can prepare a suction cup first, then use the suction cup to suck one corner of the square aluminum gusset, and then pull the aluminum gusset hard, and then use the same way to lift the other three corners of the aluminum gusset. But if it is a strip-shaped aluminum gusset, you can insert the wallpaper knife into the gap of the aluminum gusset, find the position of the clip and gently warp it down. When dismantling the original aluminum gusset ceiling, it is necessary to completely remove the aluminum gusset ceiling, and the original ceiling structure can not be retained, especially the pendant, boom and other structures of the original ceiling, because the role of these structures is to carry the weight of the ceiling, considering the future safety, the original ceiling structure must be completely dismantled.

Before removing the aluminum gusset ceiling, it is necessary to cut off the power supply and try to completely remove the circuit pipeline in the original ceiling, because this kind of circuit pipeline has lost its value. In the process of removing the ceiling, it is easy to bump into other equipment in the room, so it is necessary to take protective measures for the equipment. When disassembling the aluminum gusset ceiling, you must wear a safety helmet to avoid falling and hurting your head during the dismantling process, and you also need to wear gloves to avoid hand injuries during dismantling, and the dismantled ceiling must be stacked to avoid blowing up and injuring people after dumping.

You can use a suction cup to pull the gusset down, pay attention to the force to be even, balanced, and gently push when installing, and fasten the buckle.

Go out and buy a small suction cup that sucks on the tiles and hangs something, come back and suck the edge of the bath bomb's panel or gusset and pull it down hard.

In this case, there is no need to add another lamp, pull down the panel of the bath bomb, according to the original specifications, buy a lamp of the same model and replace it, and it can be used.

Find a stool to stand on it, poke it hard and gently, and the board will open.

You can use a word to start and cut down with the tip of the knife.

Pry the corners of the gusset with a screwdriver.

Special attention should be paid to the selection of ceiling materials, and when purchasing, it should be noted that the aluminum gusset and the supporting keel and accessories should meet the product quality requirements, and it is best to buy them together to prevent the model from matching; In the process of transportation and stacking, the gusset should be set flat and not pressed, and should avoid the erosion of high temperature and harmful substances.

When installing the bathroom ceiling, it is necessary to ensure that the keel is installed smoothly and sensitively, and the spacing deviation of a bridge should be controlled within centimeters.

If there is a deviation in the size, it should be adjusted first and then inlaid in order, and should not be inserted hard to prevent hail from becoming clear.

Bathroom ceiling materials should be made of metal, plastic and other materials, because the bathroom is a place for bathing and washing, the moisture will be great, and it is easy to deform with wooden materials, which has nothing to do with the quality of waterproofing.

After the ceiling is ready, the installation of large lamps, exhaust fans and other objects should be fixed separately, and should not be directly placed on the aluminum gusset, otherwise it is easy to make the aluminum gusset fall off, there are certain safety hazards, and it also affects the appearance.

At the same time, it is necessary to reserve the position of the bath bomb, etc., and also reserve the inspection port.

In home decoration, most people don't like to set up manholes for the ceiling, and feel that it affects the appearance, and once the pipeline equipment in the ceiling fails, it is impossible to check what part and what reason is the failure, let alone repair.

Therefore, for the ceiling of laying pipelines, it is better to set up manholes, which can be set in relatively hidden and easy to inspect parts, and the manholes are artistically treated.

In this way, some areas that are prone to blemishes will be taken care of.

During the whole installation process, the installation should be carried out in strict accordance with the above methods to avoid regrets caused by omissions.

When decorating the bathroom at home, you will choose the ceiling, and if there is a problem with the ceiling lamp, you have to remove it and reinstall it, so if the toilet light is broken, how to remove the gusset? Today, I will give you a specific introduction to this issue.

1. If the toilet light is broken, how to remove the gusset.

1. In order to ensure the safety of personnel, first of all, you need to turn off the power supply at home, there is a vibrator on the ceiling lamp, and there is also a plug to connect, and the plug needs to be unplugged.

2. Next, you need to remove the gusset, there is a strip-shaped ceiling gusset, you need to prepare a wallpaper knife, insert it along its gap, dial a few times to find its buckle position, and then gently warp downward, pay attention to the middle part first, and then knock both sides when the middle arches. Remove one of the gussets.

3. When dismantling, you need to grab one side of it with two hands, and then gently press it down, and you can directly disassemble it with a little force. Remove the lampshade, replace it with a new bulb, install the lampshade according to the reverse operation process, and finally buckle the gusset.

4. In addition, we can also use suction cups, because when installing the gusset, some businesses will be equipped with a suction cup, which is for easy use when removing it in the future, and this suction cup is not particularly expensive. It will also be very easy to remove the gusset with it, if you can't, you can ask a professional master to come to the door to solve it.

Second, what aspects need to be paid attention to when replacing the ceiling lamp in the bathroom.

1. When replacing the ceiling lamp and taking the gusset, you must handle it gently, be careful, and prevent the lampshade or gusset from being deformed by using too much force, and there will be no way to reset it in the later stage.

2. When we take off the thickness, we should consciously remember its direction, and we can make a mark. Later, when you install it again, you can install it in the original direction, so that the sub-installation will be more tight and there will be no loose problem.

3. When installing the gusset, there is a gap in the middle, we can put glass glue around it, which can plug the gap, and at the same time, it can also make the connection force of the gusset better and will not fall off.

The above content is to introduce to you the bathroom light is broken, how to remove the gusset and what aspects need to be paid attention to when dismantling.

1. Disassembly. Since the ceiling light in the bathroom is installed at a high place, and the lampshade and chandelier are prone to breakage, if you want to replace the ceiling light in the bathroom, you must have at least two people present, one person disassembles the bulb, and the other person helps to take over. Moreover, before disassembling the bulb, it is necessary to close the main valve to avoid electric shock.

2. Turn off the power. Close the main valve of the power supply to ensure sufficient safety, and remove the aluminum gusset around the top light to avoid damage.

3. Install the rectifier. Remove the rectifier from the dome light and do not use brute force. Remove the top lamp, replace it with a new lamp, install the rectifier and install the aluminum gusset back.