What should I do if the surface of the toilet tank is black and moldy?

You can use the more commonly used toilet cleaner, which is effective in removing stains. Therefore, you may wish to spray a little glue on the glass with a toilet cleaner.

top, and then scrape with a brush on the line.

You can also use edible vinegar to wipe, pour the vinegar on the toilet lid, wait for about ten minutes, the vinegar will react with the black spots, and then wipe it with a rag and rinse it with water.

1. Close the water inlet valve, open the sewage outlet valve, and drain the water in the water tank.

2. Clean the perimeter and bottom of the water tank with a clean rag. If the bottom is seriously dirty, you can use a soft towel and detergent to scrub it.

3. Open the water inlet valve, put in an appropriate amount of water to rinse the wall and bottom of the barrel, so that the dirt is discharged from the sewage outlet, and if necessary, it can be repeated many times until it is satisfied.

4. Close the drain valve, open the water inlet valve, let the water tank be refilled with water, and the cleaning work is over.

Detergent to clean. The blackened or black spots of the ceramic of the toilet water tank can be cleaned with detergents, disinfectants, disinfectant powders, toothpaste, etc.

It means that the toilet is more humid and needs frequent ventilation, and the water tank that has caused black and moldy should be wiped with a laundry detergent warm water washing rag should have an effect, and the dry laundry detergent with a wet rag will be wiped once and then wiped with a clean rag The effect will be better, not wipe it several times.

What to do if the surface of the toilet tank is black and moldy This is because the air humidity is relatively high, you can buy a toilet cleaner to clean it and strengthen the ventilation.

If the toilet water is black and moldy, then you can use baking soda and refined salt to remove the black and moldy things from the surface, and rinse it with clean water to look new.

What to do if the surface of the toilet tank is black and moldy, I personally think that the surface of the toilet tank like this can be cleaned off, and you can clean it with a special cleaning solution.

For the surface of the toilet tank is black and moldy, it proves that if you don't take care of it usually, there will naturally be scale or some dust after a long time, so the surface of the water tank is black and moldy.

The surface of the toilet tank is black and moldy, you wipe it with detergent and I'm clean.

It may be that you don't open the window for ventilation every time you take a shower, causing too much moisture in the bathroom and the water tank will become moldy.

It is recommended that you first dip a brush in detergent, clean and rinse the water tank, and then spray it with disinfectant, such as spraying it with 75% alcohol several times, and the mold will no longer occur in the future.

You can dilute the disinfectant solution and brush it with a brush.

There is a special mold cleaning agent, and a certain treasure is sold.

If you want to clean, put detergent or soap powder in it, let it dissolve in it for an hour or two, then brush it and it will wash off.

Black spots on the plastic water tank in the bathroom, you can use detergent and scouring pads to wipe off these dark spots, well, this should be caused by long-term humidity.

Dear, hello, I am glad to answer for you: What should I do if the surface of the toilet tank is black and moldy? Answer; Here's how:

Remove mold from the plastic toilet bowl and ventilate the room before cleaning the toilet. Open all the windows in the room and remove everything that is placed on the toilet tank. Wear household rubber gloves.

The black and moldy back of the toilet is due to dampness and lack of ventilation. It is usually due to the fact that the toilet bowl is not cleaned and maintained properly. However, ignoring this issue can lead to more complex problems, such as bacterial and mold infections, as well as unpleasant odors.

Here are some ways to clean and prevent black and moldy behind the toilet:

1.Use bleach: Mix 1 cup of white vinegar into 1 cup of hot water, pour the mixture into the toilet, gently clean the black mold behind the toilet bowl with a brush, and rinse it off with water.

2.Maintain ventilation: Make sure the toilet is ventilated and use an exhaust fan or open a window to keep the air circulating. This reduces the amount of moisture in the burial process, which in turn reduces the growth of mold.

3.Regular cleaning: Perform regular and thorough toilet cleaning, especially flushing the area behind the toilet. Wash with detergent and brush, rinse thoroughly, and dry with a clean towel.

4.Precautions: Use toilet stickers to prevent water from dripping behind the toilet bowl, which then makes it easy to develop moisture and mold growth. In addition, you can regularly use a plug or cleaner that purifies the air to eliminate odors and prevent the growth of mold and bacteria.

Overall, careful cleaning and maintenance of the toilet, maintaining ventilated and dry conditions, and taking precautions will help prevent the problem of black and moldy behind the toilet. If your problem is severe, you need to use a professional cleaning tool or seek professional help.

Toilet water tank is a very important part of our daily life, if it is not rented for a long time and not cleaned, it is easy to mold, which brings great harm to our lives. So, what to do if the toilet tank is moldy? Here are some tips for your reference.

First of all, we need to pour out the water in the tank and clean the tank with clean water. In order to increase the cleaning effect, you can add an appropriate amount of white vinegar or bleaching powder to the water tank, which can not only remove mold, but also kill bacteria, and achieve the purpose of cleanliness and hygiene.

Secondly, use disinfectant or special wipes to clean, you can choose a special spray cleaner for toilets. Of course, it is necessary to pay attention to the method of use and dosage to avoid damage to the water tank.

Third, you can put some deodorant and disinfected water in the water tank to deal with mold. For example, some drinks with a better taste, orange peel, or a few drops of lavender essential oil can play a role in disinfection and deodorization, making the water in the tank taste fresher.

Finally, it is necessary to clean it regularly to ensure that the inside of the water tank is dry to avoid excessive moisture and prevent the growth of mold. Hopefully, these tips will help you deal with mold in your toilet tank and make your life more comfortable and healthy.

Close the water valve on the toilet tank, clean the moldy tank, and disinfect it with a disinfectant such as alcohol.

Dip your toothbrush into the laundry detergent brush. 84 Peichang Venom: Take a piece of paper towel, tear it to the size of a black edge, dip it in some 84 disinfectant, and spread it on the moldy place. Wash your toothbrush with white vinegar. <

1. Use a toothbrush to dip the laundry detergent brush.

Disinfectant: Take a piece of paper towel, tear it to the size of a black edge, dip it in a little 84 disinfectant, and lay it on the mildew.

3. Dip the toothbrush in white vinegar and scrub it.

4. Waterproof and mildew-proof tape, pasted on the seams of the sink and the countertop, moisture-proof and mildew-proof, and easy to scrub, can also be used in the joints of the gas stove and the countertop.

5. Pour the bleach into the plastic box and roll the paper towel into a long strip. Place in a plastic box until completely submerged in bleach water. Place the strip of wet wipes directly on the blackened area and leave it for 3-4 days. After 3-4 days, just remove the paper towel.

Why does the kitchen sink turn black: When the home sink is installed, it is sold to be fixed on the countertop with silicone, and the water stains will leak into the silicone over time, which will lead to blackening or mold.

The toilet is a place that we often use in our daily life, but due to dampness and poor ventilation, it is often easy to have the problem of moldy and black toilet wall, which not only affects the beauty of the toilet, but also increases the sanitary burden of the home. So, how do we deal with the problem of mold and blackening of the toilet wall? Here are a few ways to do it.

1.Cleaning. First of all, for slight mildew and blackening, we can use a detergent to clean the wall and make sure that the wall is dry before disposing of it. Cleaners such as bleach, vinegar, soap, and soda can be used to effectively remove mildew and dark spots.

2.Deodorization. In addition to discoloring the walls, mold and dark spots can also cause odors that affect the overall environment of the room.

In addition to cleaning, it is also necessary to use some deodorants, such as photocatalysts, bamboo charcoal, etc., which can not only eliminate odors, but also prevent mold and dark spots from growing again.

3.Moistureproof. Dampness is the main cause of mold and blackening of toilet walls, therefore, we need to take some measures to prevent moisture.

For example, install air vents or air purifiers to enhance the ventilation capacity of the toilet to keep the air flowing and avoid dampness. In addition, the walls can be coated with a layer of moisture-proof paint to prevent the growth of mold.

4.Replacement. If the wall is too moldy or blackened to be cleaned and repaired, it is time to consider replacing it.

We can first remove all the old wall decorations and tiles, wipe the wall, and then choose new wall tiles, floors, or use decorative partitions to redecorate the toilet according to the actual situation.

5.Maintenance. This is the most important step after dealing with the problem of mold and blackening of the wall, and it should be maintained regularly. Clean the toilet regularly to keep it dry and ventilated to prevent the growth of bacteria and keep the walls clean and tidy.

To sum up, to deal with the problem of moldy and black toilets, comprehensive measures need to be taken to fundamentally intervene in order to effectively prevent the occurrence of this problem. In particular, the problem of toilet ventilation and dryness is a necessary means to reduce and solve the mold and dark spots in the toilet.