Bathroom waterproofing is not good looking, how to remedy the best?

After some home renovations, they find that the bathroom waterproofing is not done well or is not good-looking, and they will directly choose to smash the tiles and re-do it, in factIn my opinion, there is no need for this, and before the worst step is reached, you can try the following three methods, which may be easily solved.

First, the beauty sewing agent

In fact, the waterproofing is not good-looking because the waterproofing work is not in placeIf you don't have enough money, you can try it with the sewing agent first, after all, the sewing agent is the same as glue after drying, not only has enough elasticity, but also can be waterproof, but you must pay attention to avoid leaving dead corners when processing, especially at the door, otherwise it is easy to have odors and stains. In addition, the bathroom will become more tidy and beautiful after the sewing. Of course, it is better if it is a glazed tile, which has a layer of glaze on the surface and is completely impermeable.

Second, waterproofing agent

This waterproofing agent must be selected as a penetrating typeIt can be repaired directly through the tiles to restore the damaged parts to their original shape. After this waterproofing agent is blended, it will become like jelly, pour it directly on the ground, wait for a night to see the situation, don't wait for the waterproofing agent on the ground to dry before getting it, which is more difficult to clean.

Third, high-pressure grouting

This kind of problem is more serious, which may be caused by the deformation of the floor slab, and the waterproof layer is directly broken, so that there is a loophole, even if the waterproofing agent is poured into it, it is useless. At this time, it is best to find a professional master to take a look and ask the other party to help with high-pressure grouting. Usually the leak is found, and then the hole is drilled along the way, and the hole is repaired with a high-pressure grouting machine.

StillThis solution would be more costlyIf the hole is small, it can be solved for a few hundred dollars, if it is large, it is better to directly smash the tiles and re-do it, and judge it yourself.

In such a situation, you can choose to repaint, you can choose to decorate the waterproof wall, and then you should also use better quality materials, so that it can play a very good waterproof role.

Add some decorations, and buy some attractive small items, such as decorative shelves, such as stickers, can enhance a visual pattern.

Dig up all the waterproofing work in the bathroom and start doing it again, and the waterproofing project is very beautiful and practical.

The waterproofing of the bathroom is not good-looking, and the quality must be maintained if you want to remedy it. Some masters will suggest that you hire a professional team, and at this time you should also follow their advice and do everything well. Before decoration, cement and mortar should be prepared, and different measures should be taken to deal with them.

If you want to remedy it, you should put forward the review of the bathroom correctly, such as the floor drain, you should pay special attention to it, if it is blocked, it will be very troublesome in the later stage. <>

When you buy something, you have to buy a *** floor drain, you have to choose some reasonable designs, if the hair always falls in, the water pipe is blocked, and the smell will occur. To make the bathroom waterproof, first of all, it must be flat, and secondly, it must be straight, otherwise there is no way to use something to repair some defects. In any case, there must be cement and mortar to repair all those voids and cracks so that they will not affect other people's houses.

The most annoying thing about renting a house is that the upstairs is ticking like a leak, so you must do more when doing waterproofing. Some floors are relatively dry, so when doing waterproofing, you should also talk to the construction workers and tell them what they should pay attention to, so there will be no later things. <>

When inspecting the house, we must check whether there is any water leakage, such as the waterproof in the bathroom is not good, and there will be wet marks downstairs after the water is released. If you don't check anything, you will go to the decoration, and there will be a lot of troublesome projects in the later stage, and you can also carry out a water storage test, and there is no water seepage for 24 hours, which is qualified. I don't know how to decorate, but inspection is a thing that must be done, otherwise there is no way to live in the later stage if you don't do a good job of waterproofing.

The person who buys the house is for you, so don't think that there will be a lot of trouble, only if you check well in the early stage, there will not be so many things in the later stage. Decoration workers are lazy many times, and they must stick to their posts when they can keep an eye on them. <>

If you can afford it, find a professional to redesign. With a limited budget, you can renovate and salvage according to your preferences on the basis of the current design.

You can change it to a dark line, or you can use some PVC to wrap the not-so-good-looking pipe made of ginger inside, and paste some decorative things on the outside, which will be more beautiful.

You can repaint a new layer of colored paint, and you can also paste a layer of wall wallpaper to block the waterproof layer. This makes it look more aesthetically pleasing.

Be sure to clean the walls and floors after each shower to reduce leakage.

When we decorate our home, bathroom waterproofing is a very important project, because the bathroom uses water every day, so the waterproofing of the bathroom is particularly important. SoThe bathroom is not waterproof1. How to remedy the poor waterproofing of the bathroom.

1. How to remedy the poor waterproofing of the bathroom, first of all, find the leakage point, check whether the location of the building is a problem with the water pipe or the waterproof layer or some leaks during construction, such as the key leakage parts are not done; whether the thickness and height of the waterproof layer are in place; Check whether the later pipeline modification has damaged the waterproof layer, or whether the durability of the materials used is poor and cracks have appeared, etc.

2. How to remedy the toilet waterproofing, after finding the leakage point, it is necessary to remedy the corresponding problem, if there is a problem with the pipeline, the pipeline needs to be replaced in time; If the waterproof layer is not in place, it is necessary to repair the waterproof layer in time, and the waterproof material can be used as a brick joint leakage filler or a coating product to redo the waterproof layer; Before choosing materials, you must have a certain understanding of some waterproof materials or paint brands recommended by others to prevent being deceived into buying inferior products.

3. How to remedy the poor waterproofing of the bathroom, you need to pay attention to the construction details when redoing the waterproofing of the home decoration, such as whether the base surface (cement floor) is cleaned; Whether the construction of the key leakage parts of the corners of the ground and the wall and the upper mouth of the sewer is in place, and the waterproofing of the wall is a link that cannot be ignored; We should carry out a closed water test for 24 hours after the water discharge, and the water storage thickness and water storage time should meet the standard during the closed water test, and do not ignore these important details because of impatience, so as to achieve a long-term and effective waterproof effect.

2. What are the precautions for waterproofing in the bathroom?

1. In order to ensure that the bathroom floor is smooth, we must remember to level it with cement mortar, and then do waterproofing, so as to avoid leakage caused by uneven thickness of waterproof coating.

2. After the bathroom waterproof precautions and ground leveling, it is necessary to pay attention to fire prevention and waterproofing when entering the construction of the waterproof layer.

3. Bathroom waterproof precautions, when doing waterproof construction, the floor drain, pipeline, and wall holes must be carefully inspected, and the root of the pipeline must be caulked as required during construction.

4. Bathroom waterproof precautions, bathroom wall waterproofing is also a problem we need to pay attention to, if the bathroom wall and the bathtub are adjacent, the height of the waterproof treatment should be higher than the upper edge of the bathtub, if the shower, you need to reach 180cm of high respect for oak.

5. Precautions for waterproofing in the bathroom, before the bathroom is waterproof, it is necessary to pay attention to the correct marking of the floor drain position.

6. Precautions for waterproofing in the bathroom, in order to ensure the smooth drainage of the bathroom, the sewer pipes in the bathroom, including floor drains and toilet sewer pipes, need to be kept unobstructed.

In the bathroom safety knowledge, it will not only cause water seepage, but also have many potential safety hazards. Explain how to solve the problem that the bathroom is slippery and waterproof?

If the bathroom is not waterproof, you can think of some remedies. Here's how:

1. Clean the dust, oil, and stagnant water on the surface, and keep the surface dry.

2. If the tile joint is filled with caulk, you need to use a knife to draw a small groove;

3. In the cement parts such as tile surface, tile joint, wall joint, pipe root, etc., spray permeable waterproofing agent, and be sure to spray evenly;

4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulking paste, and the weak links around the pipe root are reinforced;

5. The connection between the ground and the wall and the pipe root are made of plastic steel mud as a waterproof edge;

6. After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours.

Therefore, after the waterproofing project is completed, it is necessary to do a 24-hour closed water test. This will allow you to find out in time if the waterproofing layer is doing a good job.

<> first: if the conditions permit, it is best to dismantle all the waterproofing again, or find the cause of the leakage to prescribe the right medicine, if the wall is not done well and leakage, you need to remove the tiles at the root of the wall, re-do the waterproofing, and then paste the tiles, if the wall at the bottom of the wall waterproof is not in place, this needs to remove all the floor tiles, re-fill the waterproof layer, after pasting the floor tiles, if it is caused by the rupture of the water pipe, only need to find the broken water pipe, replace it. Waterproofing of the bathroom Note:

Before doing waterproofing, it is necessary to clean up the debris and ground leveling, so as to effectively avoid the leakage caused by the uneven application of waterproof materials, and pay attention to the joints of each position when doing waterproofing, which is the most prone to water leakage, and the wall should also do waterproof measures, preferably 30 cm, the wall waterproof measures with a bathtub should be higher than the bathtub, and after the waterproofing is done, in order to ensure that the later problems should be tested again, such as closed water experiments.

The waterproofing of the bathroom is not done well, and the main problem isTo find the leak point,Check what exactly is the cause of the water leakage, and then remediate the water leakage point and a series of other measures.

House decoration is a big science, when it comes to the topic of decoration, everyone must be able to talk about it. After all, house decoration, if the decoration is comfortable, then the family will be happy together, I have seen a lot of cases of decoration failure on the Internet, such as the bathroom waterproofing is not done, and the style does not conform to the overall construction of the house and a series of problems.

There are many families in the new home after there will be a variety of small problems, such as the floor is not selected well, the bathroom waterproof is not done a series of problems, the bathroom waterproof decoration is also a very important thing, because if there is a failure after the follow-up re-improvement is a very troublesome thing, today we will talk about the bathroom waterproofing is not done, what is the remedy!

There are many reasons why the bathroom waterproofing is not done, it may be that the decoration master and workers did not do a good job of plugging the leakage when decorating and began to lay floor tiles, or it may be that the depth of waterproofing and wall waterproofing do not meet the corresponding requirements when doing waterproofing.

01 There are 3 situations here, the first is that the wall is not well treated, and the second is that the bottom of the wall is not treated well, relatively speaking, the first is simpler than the second. The third type is a leak caused by damage to the drain pipe. 02 If the wall is not properly treated, then we can remove the row of tiles and floor tiles near the root of the wall, and then reinstall the waterproofing.

At this time, we can no longer be careless, we can test the water first, and if there is no problem, then apply tiles and wall tiles. 03 The second situation is relatively complicated, if the bottom of the wall is not done well, and the water seeps downstairs. We had to start from scratch by breaking all the floor tiles in the bathroom and recovering them with a new layer of waterproofing.

04 For the third method, we have a better way to deal with it, we find the drain pipe and replace it.

If the wall is not waterproofed, remove the row of tiles near the root of the wall, and re-attach it after waterproofing. You can choose brick joint leak filler or redo the waterproof layer with paint products. Once the leak is located, it is necessary to remediate it according to the cause of the problem.

There is no remedy. You can only warp all the tiles and re-waterproof, so as to ensure that nothing goes wrong and avoid the problem of safety hazards in the future. And to do waterproofing, you must do a closed water test, this time don't be sloppy.

At this time, you should ask the corresponding professionals to remedy, after all, if there is such a situation, then the bathroom is likely to collapse, after all, a large area of water leakage will also cause a certain impact.

This can only be dismantled and re-waterproofed, because any surface remediation is temporary, and there is no guarantee that it will not leak, and only re-doing it is the most thorough.

You can only find a way to renovate the leaking place, or find a way to remediate and decorate the entire bathroom to reduce the leakage.