Who understands that wall reinforcement and wall interface agent are the same thing, and how to choo

Hello, wall interface agent is a general name, different substrates have different interface agents, such as paint coating, aluminum plate coating and other interface agents are different.

The wall solid refers to the product specially used to cure the wall stucco layer. Yuhua they have done a more comprehensive job in terms of interface agent and wall solidification, you can consult and understand.

Hope it helps, hope, thank you.

Dear, the wall is better. The reasons are as follows: 1. The color is different, the biggest difference between the interface agent and the wall solid is the color, the interface agent is milky white, and the wall solid is yellow, which is easier to distinguish and not easy to make mistakes when used, and it can also be removed after painting to see if there is any missing place.

2. The concept is different, wall solid is a new type of concrete mixture, which belongs to the treatment material in the modified emulsion, while the interface agent is the treatment material of the concrete interface, which has the advantages of high performance and environmental protection, and replaces the traditional construction glue. 3. The function is different, the wall solid is mainly for the targeted treatment of the wall base and cement wool, while the interface agent is used for the base treatment between the wall and the ground, which has the advantages of good air permeability and oxidation resistance, so it is not the same in the scope of use. When to brush the wall solid?

1. The cement base of the wall. When you just enter the site, you can paint a layer of wall solidity on the wall, which can solve the looseness of the wall and ensure the firmness of the wall. 2. Renovation of tile surface.

Use the concentrated liquid of the wall solid to mix 1:1 with water, and then mix it with cement 1:1 to mix evenly, use a roller to roll coat and make wool on the surface layer of the tile, and carry out the renovation process normally after drying. 3. Before the construction of latex paint.

The normal construction process is to paint a layer of wall solid before painting latex paint to ensure the firmness of the base layer, which can replace the transparent primer, and the construction of latex paint or wallpaper can be carried out after drying. 4. Paint surface renovation. Evenly remove 80% of the area of the wall paint and expose the putty layer, then mix the wall solid 1:1 with water, brush a large area and dry it before proceeding to the next step.

Wall solidification and interface agent are the same thing, which is used to deal with the bottom wall, if the wall bucket is useless. Of course, the latex rubber is not good.

How formaldehyde is contained.

But the milky gum is not used at all.

It is also impossible, it is better to use water.

wall solid. The biggest difference between the interface agent and the wall solid is the color, the interface agent is white latex, while the wall solid is yellow latex. The main advantage of using wall solid in decoration is that the wall surface after the wall solid is painted, which can clearly find whether the wall is missing or less painted, so as to prevent the decoration quality from being affected because of missing coating.

The interface agent and the wall solid have the same role in the decoration process, mainly used for the interface treatment of the wall base and the cement wool treatment of the base layer, and the main raw materials for its production are the same.

The only difference is that the interface agent is white latex liquid, and the wall solid is yellow latex liquid. Speaking of wall solidification, here is a let's talk about ground solidity. Wall solidification and ground solidification are the upgraded and evolved products of interface agents, which can be used for both wall and ground base treatment.

The appearance of the wall solid ground solid is subdivided into wall and ground base treatment materials, the wall solid is used for the wall base treatment, the ground solid is used for the ground base treatment, and the color is "yellow wall green space", that is, the yellow wall solid green ground solid.

Wall solidification is actually a kind of interface agent, which plays the role of connecting the upper and lower levels, consolidating the substrate and allowing other substances to cover it. If there is some dusting on the interface you want to deal with, you can still use its back cover.

The wall solid has excellent permeability, which can fully infiltrate the surface of the wall base material, make the base layer dense through gluing, improve the interface adhesion, improve the bonding strength of the mortar or putty and the wall surface, and prevent hollowing. It is suitable for the dense treatment of the base layer before plastering and scraping putty on brick-concrete walls.

Wall solidification can improve the adhesion of smooth base layers, and is an alternative product of traditional building interface agents. It is also suitable for the bonding of wallcovering and wallpaper. Due to the easy coating, thin adhesive film and suitable initial viscosity, it is especially suitable for the bonding of wallcloth and wallpaper, and it is not easy to produce dead folds and bulges.

It can also be used for basal "hair making".

With the rapid development of the economy and the improvement of living standards, people's requirements for decoration are getting higher and higher. According to statistics, about 216 auxiliary materials will be used in the decoration of Hongcong, such as wall solid. Today, I will talk to you about the difference between wall fixing and interface agent, and what we need to pay attention to when using wall solid.

1. Different colors: First of all, their colors are completely different, the wall is a yellow latex, and the interface agent is a white latex.

2. The concept is different: wall solid is a relatively new type of concrete mixture combined together to modify the emulsion interface of a treatment material. The interface agent is a high-performance, relatively environmentally friendly concrete interface treatment material.

3. Different functions: the function of wall solid is for base treatment and cement wool treatment, while the function of interface agent is for wall and ground interface base treatment.

Second, what aspects need to be paid attention to when using wall solids.

1. Before we use the wall solid, we must first take a rag to clean up the base interface, and then polish the base surface, we must use water grinding to polish the old ground, increase step by step, in the whole treatment process, we must sell water polishing with laughter.

2. Wait for the slurry to be fully absorbed, and then seal the cement concrete with the curing agent, evenly spray it on the construction surface, and then wait for two to three hours until the hardening reaction occurs, and then spray the curing agent again to ensure the hardening effect.

3. After four to five hours, when the material becomes sticky, spray water mist on it, so that it can be fully dissolved, and carry out a second reaction, do not let it dry out, otherwise the ground will be white.

4. After the wall is solidified, it is especially like a thin plastic film, which is mainly used to make the surface strength of the wall stronger, close the bottom layer, and dispose of the floating dust well.