How should the floor be protected when renovating?

In people's food, clothing, housing and transportation, housing accounts for a considerable proportion, because housing prices are relatively high now, so a house needs at least one million, and most people buy rough houses.

After handing over the house, you need to decorate it yourself, of course, decoration is a very annoying thing, because it involves a lot of things, and it is also very trivial, therefore, the two are very worried, I believe that everyone is unwilling to damage their own ground when decorating, especially after laying floor tiles.

After that, then, how should the floor be protected when it comes to renovation?

1. When painting the wall, you should spread a layer of thick things on the ground for protection.

Because when painting the wall, I often talk about some wall paint or putty.

Falling and falling on the ground, it will stain the ground, and even scratches the ground may be accidentally scratched when cleaning, if you put a layer of cloth, you can avoid this very well.

Second, put something more sharp is that you should put a layer of things on the ground.

Sometimes when decorating, we use some electric drills.

Because the drill bit is sharp, it is very likely to scratch the floor tiles, so when placing these things, it is best to put a layer of cardboard on the ground, or put the electric drill somewhere else. This can also effectively avoid unnecessary trouble.

3. Whether it is to decorate by yourself or find a decoration company.

Decoration should remind workers to do a good job of protection.

Some workers are more careful, but some workers are not so careful, because after the floor tiles are scratched, it is very troublesome, therefore, for the construction workers, they should be reminded to do a good job of floor tile protection measures. In this way, unnecessary disputes and troubles caused by this can also be avoided. Therefore, decoration is a very cumbersome thing, and people also need to face it carefully, so that they can pretend to be a satisfactory home.

Generally, the ground garbage will be cleaned up before decoration, and then the ground protective film will be paved, which can protect the ground from being scratched in the subsequent decoration process, and also prevent latex paint, paint, etc. from dripping on the ground.

When decorating, the floor should be covered with thick paper or other things that can be mated, so as to protect the ground.

1.Resistant to bumps and abrasions.

2.Moisture-proof and dirt-proof.

It can be protected by laying waterproof floor protection paper, which has the following characteristics: waterproof, non-slip, wear-resistant, cushioning, and compression-resistant.

In order to avoid damage to the finished floor tiles during the construction process, it is necessary to take correct maintenance measures for the finished floor tiles.

Do not rush to walk around and pile up sundries after the floor tiles are paved, so as not to cause the floor tiles to loosen. After it is completely dry, it will be necessary to cover the surface of the floor tiles with a protective layer. (1, anti-collision and abrasion, 2. moisture-proof and dirt-proof).

Then we can lay floor protection paper or floor protection film to protect it.

The use of floor protection products can not only prevent the leakage of paint liquid, but also isolate the dirty construction environment and prevent grit and other wear and tear on the surface wax of the floor. It can also increase the safety factor in the construction process.

Paving protection products also need to take some thought, and the correct use of protective products can effectively play a protective role. Use as follows:

1.Make sure the floor surface is clean and dry, and wipe all dust, debris, dirt, etc.

2.Lay the floor protection product label face up on the ground, and make sure that the laying is flat, flatten to the required length and cut it with a utility knife or scissors.

3.Tape all edges, seams or overlaps with adhesive tape, and the adjacent floor protection product should be tightly attached when the tape is attached to avoid the tape remaining on the floor.

Superlative. Environmentally friendly materials are scattered.

Protecting floors and walls is an interesting and important task before renovating. This task not only avoids damage to the floor and walls during construction, but also protects the occupant's renovation investment. Here are a few ways to protect floors and walls.

1.Use of plastic floor panels and wall coveringsDuring construction, you can use vertical plastic flooring to cover the floor and prevent damage to the ground caused by paints, paints and other building materials. You can also cover your walls with plastic to protect them from paints, paints, and other building materials.

2.Using Dust PaperUsing dust paper is a simple and effective way to protect the ground. You can place the paper on the ground during construction to collect all the dust and other small items. This way you can avoid contamination of the ground during construction.

3.Installing a bumper strip with bumper strips can effectively protect the wall from cracks and other damage during construction. The bumper strip can be fixed directly to the wall to avoid the construction crew accidentally touching the wall and causing damage.

4.Using low-tack tape is a very practical way to cover areas that need to be covered during construction. The adhesive tape is very low and can be easily removed after construction without damaging the occluded area.

5.The use of lacquer cloth is a commonly used wall protection material. It can be fixed directly to the wall to avoid contamination of the wall with paint and coatings. The lacquered cloth can be easily removed after construction without causing any damage to the walls.

All in all, it is very important to protect the floor and walls. As long as proper measures are taken, damage to the floor and walls during construction can be avoided. This will help protect the renovation investment while also allowing the owners to achieve a longer-term result.

The best thing to do is to install the floor at the end, so that the floor can be better protected, or when decorating, the tools used are not too heavy.

When decorating, a film should be laid on the floor, which can play a role in protecting the floor.

To choose different maintenance methods according to the material of the floor, be sure to keep the floor clean and dry, if you pour water, wipe it with a dry rag in time, and choose a waterproof and moisture-proof floor.

At present, there are many decoration materials on the ground, such as ceramic tiles, wooden floors, etc. After the renovation of the floor is completed, it is often necessary to protect the materials and construction. Many owners don't understand that there will be a lot of trouble and rework in the later stage, so how to do the decoration ground protection?

First, how to decorate the ground protection.

1.The protection of the entrance door of the decorative layer - the entry of various decorative materials and the cleaning of various architectural and decorative garbage will pass through the entrance door. In the process of dealing with these elements, the potential for collision and friction with the entrance door is greatly increased.

To do this, you can wrap the door with a finished protective film.

2.Protection in the transformation of ground hydropower - when replacing the circuit, please try to slot, and the place that cannot be placed must be fixed for protection. Sewers must be sealed and covered with bare wires as much as possible.

3.Decorating the floor, tiling and protecting the floor is also part of the basic decoration. It is often found that the tiles are not protected during and after construction.

Specific performance: only placing tiles on the floor, piling up debris on the floor, walking on the floor before stepping on the floor, tiles, finished products that are not covered with protective film on the floor, etc. , which affects the effect.

Laying tiles can lead to problems with the quality of the tiles.

Second, how to level the decoration ground.

1.Leveling cement mortar with ordinary cement mortar. The level is closely related to the technical level of the worker.

Generally, the flatness thickness is large, and it is difficult to achieve flatness control. The quality of the leveling is directly proportional to the skill of the worker. If the worker's craftsmanship is not good, it is easy to produce a lot of land that is still uneven.

At present, this kind of cement mortar leveling method is still relatively late.

2.Self-leveling flushing is a relatively new leveling technology, which began to appear in the domestic construction and flooring industry in 2005. It uses highly polymerized self-leveling cement for floor treatment and offers many advantages, such as a thinner scraper that is 3 mm higher than a cement mortar scraper, and a good ability to control ground thickness, resistance and flatness.

The leveling of the floor of the house with a wooden floor before the renovation is also suitable for the leveling of the automatic leveling floor.