How to take the battery method, the correct way to take the car battery

How to take the electricity The electricity is actually very simple, you only need to connect the positive pole of the electric car with the positive electrode of the electric car, and connect the negative electrode of the electric car with the negative electrode of the electric car. After the connection, the hitchhiker should keep the engine idle, and the hitchhiker can start the engine at this point.

If your car's battery is out of power and the engine can't be started, you can use the power to start the engine.

The battery is an important part of the car, when the engine is not started, the battery supplies power to the electronic equipment of the whole car, and the battery is also responsible for starting the engine.

When starting the engine, the starter, ignition system, fuel supply system, etc. all need to be operated, and the operation of these systems cannot be separated from electricity.

If the battery dies, the engine will not start.

After starting the engine, the engine drives the generator to run.

The generator can charge the battery while it is running, and it can power all the electronic devices in the car.

The battery is a wearing part that needs to be replaced regularly, and the performance of the battery will continue to decrease as the number of charging and discharging increases.

During charging and discharging, the ions in the battery move in the electrolyte, and some ions react chemically with the electrolyte as they move in the electrolyte.

As the number of charge and discharge increases, the number of ions in the battery will also decrease, so the performance of the battery will decrease.

How to take the battery.

It is very simple to take the electricity, you only need to connect the positive pole of the battery of other cars with the positive pole of the battery of the losing car, and connect the negative pole of the battery of other cars with the negative pole of the battery of the losing car.

After the connection is made, the engine will be started for the car that comes to the electric car, and the engine will be started after two minutes for the train that is lost.

After the battery is empty, you can call ** to call a good friend who drives to come and take a ride.

The battery is one of the more important parts of the car, when the engine is not started, the battery is responsible for supplying power to the electronic equipment of the whole car, and the battery is also responsible for starting the engine.

If the battery loses power, it will not be able to start the engine. The battery is a consumable part, and the service life of the general car battery is 3 to 4 years, but the battery of many cars does not last so long and is broken, which is caused by the incorrect use habits of the owner.

When not driving for a long time, it is best to disconnect the negative pole of the battery, which can prevent the battery from losing power. When you don't use the car for a long time, you can drive the car out and turn twice if you have time, which can also allow the generator to charge the battery, which is good for the battery.

During the usual maintenance, the technician can use professional equipment to test the internal resistance and voltage of the battery. If the internal resistance and voltage do not reach the specified value, it means that it should be replaced. (Photo by Q&A: Q&A called the beast) @2019

Car batteriesThe correct way to take the power is as follows:

1. Connect the red line: Find a car with electricity, connect one end of the red line with the positive terminal of the battery of the car without electricity, and connect the other end to the positive terminal of the battery of the car with electricity.

2. Connect the black wire: one end of the black wire is sandwiched in the negative pole of the car without electricity, and the other end is connected to the negative pole of the car with electricity.

3. Start the car: start the car with electricity, and the car that originally had no power can also be successfully started after the power is turned on.

The correct way to power the car must be to connect the positive electrode to the positive electrode and the negative electrode to the negative electrode, otherwise the battery will be burned out, but it is definitely not as simple as the positive electrode directly connected to the positive electrode and the negative electrode directly connected to the negative electrode. Although it is possible to start the vehicle by directly connecting the batteries of the two cars in this way, most of the time it will fail.

The right way to get a ride on the car:

1. Prepare two battery lines, the rescue vehicle and the rescued vehicle should be head to head, and the rescue vehicle does not need to turn off.

2. Find the batteries of the two cars, distinguish the positive and negative poles of the battery, and do not connect the positive and negative electrodes wrongly.

3. First of all, one section of the red cathode battery wire is connected to the positive terminal post of the rescue vehicle battery, and then the other end is connected to the positive terminal post of the rescued vehicle battery.

4. Similarly, one section of the black negative battery wire is connected to the negative terminal post of the rescue vehicle battery, and then the other end is connected to the negative terminal post of the rescued vehicle battery.

5. Note that when wiring, you should connect a wire and then connect a wire, rather than a car and then pick up the other two cars. Remember not to let the positive and negative poles touch together, otherwise it will cause a short circuit.

6. After the battery cable is connected, it can be started normally in the rescued vehicle.

7. After the vehicle starts, remove the battery wires one by one, and finally the rescue vehicle is on the car for more than half an hour to replenish the battery power.

It is best to remind all car owners that most of the battery power loss is caused by the use of on-board electrical appliances for a long time after the engine is turned off, of course, there are other factors, in order to avoid this situation again, you should find the source of the power loss and take preventive measures.

Hello, the correct way to take the car is as follows: 1. Turn off the vehicle, open the battery protective cover, and expose the positive and negative poles of the battery; 2. Distinguish and confirm the positive and negative poles of the battery; 3. Take a tie wire, connect one end to the positive pole of the dead battery, and connect the other end to the positive pole of the electric battery; 4. Take another wire, connect the negative pole of the electric battery, connect the other end to the engine shell or body of the non-electric vehicle, do not connect the negative, and then start the electric vehicle. Car rides, also known as jumpers and borrowing, are a method of connecting another vehicle's battery or other external power source to a vehicle with a depleted starting battery to start the vehicle.

The correct way to take the battery is to connect the wire to the positive pole of the tram, then connect to the positive pole of the tram, connect the negative pole of the tram to the terminal post, and then connect the negative pole of the tram, and then connect the negative pole of the tram.

The first thing to do is to make sure that the rated voltage of the battery of the two cars is the same. When taking electricity, it is connected in parallel, that is, the positive poles of the two batteries are connected, and the negative poles of the two batteries are connected. The wire should be thicker, preferably more than 16mm.

Generally, the car battery is electrified. Find one. With. Positive and negative. Answer the dotted line. The red one is. Cathode. The blue or green ones are the abs. The red one is on the positive pole and the green one is on top of the positive pole. Hit on the negative electrode.

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.

The car battery is out of power, how to take the power.

Find two wires, a battery, connect the positive electrode to the positive electrode, and connect the negative electrode to the negative electrode.

Car battery power**, the specific steps are as follows:

1. First of all, prepare a tie wire, as shown in the figure below.

2. Next, open the hoods of the two cars, (note: the red circle is the battery), as shown in the figure below.

3. Then, remove the battery buckle, and you can easily open the battery cover, as shown in the figure below.

4. Next, after opening, you can see the positive and negative poles of the battery, which are the positive and negative poles, as shown in the figure below.

5. Finally, connect the positive pole of the two cars to the positive pole and the negative pole to the negative pole. In this way, the battery of the car is completed, as shown in the figure below.

Notes:1. Both vehicles should be in a flame-off state before the line.

2. Don't make a mistake in the order of wiring and wire removal, otherwise the terminal will ignite when it comes into contact.

Determine the position of the battery, park the rescue vehicle in a suitable place for electricity, and connect the positive electrode with the positive electrode, and connect the negative electrode with the negative electrode.

Don't make a mistake, start the rescue vehicle first, and then start your own vehicle, after the engine runs stably, remove the battery cable, and maintain the engine running for more than half an hour, of course, if you can't find a suitable vehicle to do the rescue ride, you can find professional road assistance, the major insurance companies designated partners are also more assured.

This is a positive electrode and a negative electrode on the battery, the red cover is the positive electrode, and then the external battery is also a positive electrode. Connect the positive electrode, and the negative electrode can be connected to the negative electrode to start normally.

If it is a car, use a wire with a clip to connect the old and new batteries in parallel and start. The lap wire should be larger than 16 square copper wires, and the distance should not exceed 2 meters.

In addition, 1. If there is no problem after the test, it can be used normally, if there is a problem, it may be that the battery has been powered off, which has caused data loss, and needs to be initialized, commonly known as decoding or coding.

2. After lap starting, it needs to be charged at more than 1500 rpm for 20 minutes to start once, and 30 minutes for starting once the next day.

The positive electrode is connected to the positive electrode, and the negative electrode is connected to the negative electrode. ，

The correct way to power up the car battery is as follows:

Tools: battery cables, automobiles.

1. Prepare two battery cables. The rescue vehicle and the rescue vehicle should be close to each other head-to-head, and the rescue vehicle should not be turned off.

2. Find the batteries of both cars. Distinguish the positive and negative poles of the storage and dismantling battery, and do not connect the positive and negative electrodes incorrectly.

3. First of all, one end of the red positive battery wire is connected to the positive terminal post of the rescue vehicle battery, and then the other end is connected to the positive terminal post of the rescued vehicle's New Year's battery. Black is the same.

4. After the battery cable is connected, it can be started normally in the rescued vehicle. Instead of picking up one car and then picking up the other two. Remember not to let the positive and negative poles touch together, otherwise it will cause a short circuit.

5. After the vehicle is started, remove the battery wires one by one. Finally, the rescue vehicle was mounted for more than half an hour to replenish the battery power.