How to reset the tire pressure alarm? How to reset the tire pressure alarm? Can I do it myself?

The tire pressure light is on, indicating that the tire pressure monitoring system has detected a fault. During driving, if you find that the tire pressure light is flashing, please stay calm, do not panic, reduce the speed of the car, avoid quickly hitting the steering wheel and braking suddenly, and then drive to a safe place to stop and check. If a vehicle tire is found to be running out of air, a pressure test and air pressure can be applied to each tyre if an air pump is available.

If you don't have the relevant tools, make sure that the tires have enough air pressure to drive slowly to the inflated area, if the air is insufficient, the continued use of the tires may aggravate the injury and even lead to accidents. <>

When the tire pressure is adjusted to a normal state, we can reset the tire pressure light, and the tire pressure monitoring of some models can detect that the tire pressure is normal, and then turn off the tire pressure light. In addition to using a special decoder to eliminate the fault code to achieve tire pressure light reset, for those models with tire pressure reset button, it can be manually operated when the tire pressure is normal. The commonly used tire pressure button is shown in the figure.

Turn on the start ignition switch, press and hold the tire pressure monitoring reset button, and release it after hearing a "bang"; At this time, the tire pressure monitoring system will store the normal tire pressure data at that time, and then automatically clear the original data; Finally, the tire pressure light on the dashboard goes off. (Note that this method is only available on certain models, please refer to your own vehicle instructions.) <

The tire pressure monitoring function in the in-vehicle intelligent system is only set when the vehicle is parked; Turn on the ignition switch, enter the instrument cluster menu through the steering column switch or the multi-function steering wheel switch key, select "Comfort System Settings", and click the "Tire Pressure" option; Select "Pressure Monitoring", at this time, the instrument displays the tire pressure monitoring, we select the tire pressure in the settings, click to confirm; After the inflation pressure is stored, the tire pressure is set and the alarm light is off. <

How to reset the tire pressure warning light:

1. Re-set the fault lamp to eliminate it;

2. Press the set button with tire pressure identification on the far right side of the front of the gear lever for a long time, if the tire pressure is normal, the alarm light can be eliminated;

3. You can press and hold the tire pressure monitoring button until the light goes out, so that it is eliminated and then press the tire pressure monitoring button until the light is on, so that it is set again;

4. It can be eliminated by setting it in the multi-function steering wheel. Or use a computer detector to reset and eliminate;

5. How to turn off the tire pressure indicator: open the glove compartment on the passenger side, there is a button in the upper left corner (next to the auxiliary airbag key switch), in the case of turning on the ignition switch, press and hold the button until the tire pressure light goes out. However, the tire pressure must be within the normal range.

Turn on the power of the instrument first, press and hold the reset button until the tire pressure warning light goes out, and then press and hold the reset button again until the tire pressure warning light flashes three times and goes out When the tire pressure warning light is on, it is recommended to reduce the speed, turn on the double flashing lights, find a safe place to park, get out of the car to check which tire is leaking, and then continue to drive or change the spare tire according to the actual situation.

Start the car, then keep holding down the button to reset the tire pressure, and let go when you hear a bang, and that's it.

At this time, we should first check that there is a problem with the car, and then repair it, at this time it can be automatically reset, and it will also be used normally the next time there is a problem.

After such a situation, be sure to go to the 4S store for inspection and reset, try not to operate blindly, and be sure to seek the help of professional staff.

If the tire pressure alarm, you need to go to the repair shop to reset the tire pressure, and you can't operate this only thing at all, such as the improper operation of the first acorn, it may also cause a puncture.

Of course, you can operate it yourself, as long as you return the tire pressure to normal, and then turn the switch of the tire pressure alarm.

At this time, it is very difficult to reset, and you can't operate it at all, so it's best to go to the 4S shop for maintenance.

Tire pressure return isTire pressure monitoring。It will light up after detecting that the tire pressure is abnormal, and it needs to be reset once after the tire pressure is processed to prepare for the next monitoring. The tire pressure reset function is mainly used to detect the tire pressure and ensure safety.

Tire pressure monitoring system.

Generally, it is installed in the rim.

On the built-in sensor, the air pressure in the tire is sensed, the air pressure signal is converted into an electrical signal, the signal is transmitted to the receiver through the wireless transmitting device, and various data changes are displayed on the display or in the form of a beep, etc., the driver can inflate or deflate the tire in time according to the display data, and the leakage can be guessed in time, so that the big accident can be resolved in a small way.

1.After the tire rotation is complete, press the "MENU" button on the turn signal lever to switch the small screen on the instrument cluster to the "Vehicle Information Bar".

2.Turn the up and down selection buttons on the turn signal lever to find the tire pressure information bar. Press and hold the "Set CLR" function button on the head of the turn signal lever until the information "Whether to perform tire pressure learning" pops up on the small screen, then rotate the up and down selection buttons to select "Yes", and press the "Menu" button to confirm.

3.After the selection is completed, the instrument shows that the tire pressure is learning, the horn rings twice, the left front wheel turn signal is lit at this time, and the tool is used to press the valve core to deflate the left front tire until the horn sounds, and the left turn signal goes out, and the right turn signal lights up, and the left front tire calibration is completed.

4.Once the left front tire is calibrated, the right front tire is deflated until the horn sounds, and the right front tire is calibrated.

5.The right front tire is calibrated and the right rear tire is deflated until the horn sounds, the right turn signal goes off, the left turn signal lights up, and the right rear tire is calibrated.

<>6.The right rear calibration is completed, and the left rear tire is deflated until the horn sounds, and the turn signal goes out, and the vehicle tire pressure monitoring system is reset to complete, at this time, the air pressure is low, the tire pressure needs to be adjusted according to the vehicle standard, and the valve cap is installed in the water.

7.Start the vehicle to observe whether the instrument light is normal, if the non-fault light flashes, the vehicle tire pressure monitoring system is reset.

Each tire is equipped with a tire pressure sensor, which transmits the tire pressure to the car's tire pressure control system wirelessly, and the car's data meter can display the tire pressure at each specific position.

For example, if the left front tire is replaced with the right rear wheel, if the tire pressure system is not reset, the car will recognize the original tire and still determine that it is the left front wheel, not the right rear wheel.

The function of tire pressure monitoring is to automatically monitor the tire pressure in real time during the driving of the car, and to alarm the tire leakage and low air pressure to ensure driving safety.

The first thing to do is to make sure that the tire pressure is really okay. Stop on the flat road and turn off the ignition, then turn on the power, press and hold the tire pressure monitoring button, about 5-6 seconds will hear an alarm, and then release the button, and the reset will be successful.

Tire pressure is a sign of a car's load capacity. The size of the load on the car depends on the pressure of the tires. According to the relationship between the load index of the tire and the tire pressure and the load capacity of the tire, the higher the tire pressure, the greater the load capacity; The lower the air pressure, the lower the load capacity.

For example, a tire with a load index of 80 will have a load capacity of 300 kg when the air pressure is MPa, and a load capacity of 450 kg when the air pressure is MPa. It can be seen that the influence of tire pressure on the load capacity of the car is considerable.

Tire pressure is an important factor that affects the service life and economy of a tire. Unreasonable tire pressure selection will cause power cycle, which will increase tire wear and affect the service life, and at the same time, considering the impact on dynamics, the right tire pressure must be selected to prolong the service life of the tire and improve the economy.

How to reset the tire pressure warning light when it is on.

How to reset the tire pressure warning light when it is on.

1. Press the brake pedal of the car and prepare to start the engine of the car.

2. Press the car's one-button start button to start the car's engine.

3. All the lights on the dashboard are turned on to confirm that the electronic system of the whole vehicle is energized.

4. Inflate the 4 tires of the car so that the tire pressure of the 4 tires is the same.

5. Press the tire pressure control button to reset. (Done).