What should I do if the high beams of the other party s large car driving at night are too bright?

Anyway, this kind of thing doesn't happen every day, and if you encounter this situation in the future, try to stay away from the other party, slow down, and then pull over and stop, and wait for the other party to pass before leaving. Your own safety is the first thing. Just think about it, there is no need to get along with these people.

There is something wrong with your driving habits. When you get to the car at night, the average novice will stare at the headlights of the other party's incoming car to see if he changes the light, and you change him or not, so you are very angry, right? I teach you that no matter how the other party changes, you can't stare at the lights of the oncoming car, and you can't even look at it, in that case your eyes will be glazed.

You have to look at the road on your side, and generally a polite experienced driver will flash a low beam to let you see if there is an obstacle in front of you, and immediately change back to the high beam. You'll want to slow down and pass through the rendezvous while making sure it's safe.

I didn't take out the xenon lamp when I installed it, and I didn't encounter a hard one at that time, and I beat him all over my body.

Slow down, pay attention to your surroundings, and remember not to turn on the lights to shake each other out of anger.

When you encounter the other party's lights, you should pay attention to the white lines on the side of the road as a reference, take your own route, and don't look at the other party's lights.

Glue a sunscreen film to the glass.

The details are as follows.

To Kaizhouce: Keep your eyes away from the glow as soon as possible. When a person's eyes see bright light, the pupils shrink instantly, and it takes a long time to recover from seeing objects in dim light.

So, you will notice that after the high-beamed vehicles meet us, the road ahead is very dim even under the headlights. Countermeasures: Flash the high beams a few times to remind the other party, and do not turn on the high beams when counterattacking.

When doing the above actions, the left hand can flip the high beam switch and flash it a few times to give the other person a prompt to turn off the high beam.

If you really can't see what's ahead, simply slow down or even pull over and let it pass safely. Because of this, except for the two beams of white flowers that are friendly and white, everything next to them is not clear, and the road in front of them is not clear, and it is not clear whether there are other vehicles and pedestrians.

In recent days, a problem of "you will be scolded when you turn on the high beam, and you can't see clearly when you turn on the low beam" has aroused heated discussions among the majority of netizens, and there has been a lot of uproar on the Internet. As for the low beam, it is mainly used in the urban area where the car will be lit and the light is sufficient, and the high beam is generally not required in the urban area. As for the high beam, it is mainly used in the suburbs where the light is not good, and when the car is meeting, you can reduce the speed of the car and adjust it to the low beam and turn on the high beam.

There is also a flashing light, which can be turned on from time to time to look at the road, or to alert others. So what's going on? Let me share my thoughts with you.

One. Low-beam low-beam low-beam headlights are mainly used in urban areas with sufficient light and sufficient light, and high beams are generally not required in urban areas. In well-lit urban areas, try not to use high beams, which can cause others to not be able to see the road clearly, which can lead to car accidents.

Don't hold the mentality that others don't care about you, and try to turn on the low beam when the city is well lit. <>

Two. The high beams and high beams are mainly used in the suburbs where the light is not good, and when the car is in the car, you can reduce the speed of the car and adjust it to the low beam and turn on the high beam. However, when there is no car, it is best to drive the high beam, otherwise you can't see the road clearly, which will lead to other accidents, just use it in combination with the actual situation.

Three. Flashing lights are also flashing lights, you can turn on the high beam from time to time to look at the road, so that after seeing the road conditions, it will not affect the vision of others. However, if there is no car and the light is not good, it is necessary to turn on the high beams as much as possible. <

The above is my opinion on this issue, which is purely personal and for reference only. If you have any different opinions, you can leave a message in the comment area and discuss it together. After reading it, remember to like and follow.

Low beams should be used for night driving, and high beams and low beams should be interchanged, so that it will be fine, and the effect will be very good, and the field of vision will be much wider.

You can choose to turn on the headlights, which can improve the lighting effect, and can also avoid disturbing other drivers, and the safety is very high.

1. Polite flashing light reminder, friends who drive understand that sometimes driving will be confused, forget to turn off the high beam, and frequently turn on and off the high beam, which is normal, what needs to be done is to flash the light to remind the other party to turn off the flash.

2. In addition to reminding the other party to turn off the high beams, you should also do a good job yourself, please turn off the high beams when the two cars are driving in opposite directions, and also turn off the high beams when driving behind the car, because this will also make the driver of the vehicle in front very uncomfortable. If the other party doesn't know that they haven't turned off their high beams, then don't worry too much, just reduce your speed.