What should I do if the bathroom tiles are leaking?

First of all, the water leakage is due to the fact that the waterproofing is not done well, and it has nothing to do with the tile.

Secondly, there is a phenomenon of water immersion around the brick, because the quality of the tile is not up to par, the density is too low, resulting in the rapid absorption of water, and appears between the bottom glaze and the embryo body, there is a circle of dark color areas of the tile, if you do not touch the water for a long time, the color will slowly fade, but once it encounters water, the problem will still appear. Regarding what to use for caulking, before the caulk appeared, white cement was mostly used, and the disadvantage was that it was easy to mold.

Now what? yes, what to do? There is only one way to remedy it.

Dig out all the materials in the filled joints, and then wait for them to dry thoroughly, and then waterproof, be sure to be fully thorough, and then use caulk, note that when waterproofing, if the bricks are too bad, there may be a little color penetration in the waterproofing process. Therefore, when buying ceramic tiles, you must choose a high density and a good glaze, otherwise this kind of problem often appears.

Don't look at the ** first when buying bricks, then look at the color. After you know his material, pick the color, and then bargain, this is a necessary process, just like going out to eat, it is impossible to go to the lowest restaurant ** where to eat, right?

There are also ** good things, and you have to look at and compare things when you buy them.

Hope it helps, hope!

Whether it is above or on the ground, first of all, we must see whether it is ** water leakage, if the cause of water leakage is ruled out, there is still a small amount of water seepage, you can use some waterproof sewing agent.

Bathroom tile water seepage is a problem that people often encounter in their daily life, but many people are not clear about the cause of water seepage in bathroom tiles, let alone the solution, so what to do about bathroom tile water seepage? How to waterproof the gap of bathroom tiles? Let's take a look with me!

1. If the tile seepage is caused by the rupture of the toilet water pipe, the water pipe pressure test should be carried out first, and the water leakage should be found, the wall of the leakage should be opened and the water pipe should be replaced; 2. If the tile seepage is caused by the problem of the waterproof layer of the bathroom, the wall should be beaten to the waterproof layer first, and the waterproof layer should be made for the wall after scraping the putty, and then the tile should be paved; 3. If there is water seepage in the tile gap, you need to use caulk or cement slurry to fill the cracks, and then make a layer of waterproofing.

Second, how to waterproof the gap of bathroom tiles.

1. Before doing the waterproofing work of the bathroom tile gaps, first of all, the dust and stains on the surface of the tiles should be cleaned up, and the surface of the tiles should be kept dry, and then a wallpaper knife should be used to draw a small groove in the tile gaps and clean them.

2. Then spray the waterproofing agent in the gaps and pipe roots of the tiles, and choose the waterproofing agent with good permeability, and the spraying must be uniform. After the waterproofing agent has dried, use caulk to fill the gaps in the tiles, including the gaps in the wall tiles of the shower room, which also need to be filled with caulk.

3. In places with large gaps such as wall and ground connections, plastic steel mud should be used as a waterproof edge, and ensure that the bonding is firm. After the waterproofing work of the bathroom tile gap is completed, it should not be drenched within 24 hours, and it can only be used after the plastic steel mud is dry.

Summary: The relevant content of what to do about water seepage in bathroom tiles is introduced here, hoping to help friends in need. When there is a water seepage problem in the bathroom tiles, it is recommended that you find a professional to repair it at your home to avoid causing the problem to become more and more serious.

When the bathroom is renovated, the waterproofing project should be in place to avoid water seepage. How to deal with water seepage in bathroom tiles? PChouse will take you to find out.

According to the leakage of the wall tiles in the bathroom, there are two kinds of situations, one is caused by the leakage of the water pipe, and the other is caused by the leakage of the waterproof layer, so when solving the problem of water leakage on the wall of the bathroom, it is necessary to distinguish what causes the leakage.

If there is a problem with the waterproof layer, the tiles must be removed, the wall must be hit to the waterproof layer, and it is better to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles.

The second is that the water pipe rupture leads to water seepage, in this case, the water pipe needs to be tested to see if there is a water leakage, if it is indeed caused by the water pipe damage, to find out the leakage immediately, open the wall and replace the water pipe.

Finally, if the wall is only leaking due to moisture, you only need to pay more attention to the ventilation and cleaning of the bathroom in your daily life. If the tile gap is not good, there is water seepage. First you need to use cement or caulk to fix the cracks, and then make a layer of waterproofing.

1. If the tile is cracked, then replace the cracked tile with a new tile.

2. If the gap is caused by the wrong way of tile paving, you need to fill a layer of beauty glue at the gap.

3. If there is a gap on the edge of the toilet, you can brush the edge of the toilet with waterproof glass glue.

4. If the water pipe under the tile is leaking, you can do a simple waterproof treatment on the water pipe, or replace the water pipe.

5. The tiles of the bathroom can also be removed in a small area, and the tiles can be re-pasted with waterproof paint.