How can the idle plastic bucket at home be made into a compost bin?

If you have discarded trash cans at home, or some relatively large plastic buckets, don't throw them away, you can transform them into compost bins, which are good for making organic fertilizer and organic fertilizer soil. If you find yourself too much trouble making, you can also buy your own compost bin online or at a gardening store.

Some compost bins will have some hand-cranked handles that can increase the speed at which the compost will rot and ferment. However, the compost bin doesn't actually need those fancy things, and it needs to have proper drainage holes and a sealed lid on the top when it is placed outdoors, and the compost can basically be completed.

It is most suitable to use plastic buckets to make compost bins, the capacity of plastic bins is generally about 60 120 liters, so that a large capacity can be used to make compost.

If the plastic container is too small, the speed of decomposting will be slower, the efficiency of making compost will be lower, and there will not be much material to put, so it will not be able to produce enough heat, and it is difficult to get a satisfactory compost.

Therefore, it is better to use some plastic buckets with a capacity of more than 70 liters to make a compost bin.

When making a compost bin, it is best to make more than two or three, because when making compost, one of them has already been completed, and you can pour it into a new compost bin, and then the other can continue to compost.

It is not necessary to drill holes at the bottom of the compost bin, because drilling will increase air circulation and will also cause a mess on the floor, in order to replace the ventilation holes, the compost bin can be turned frequently, which can increase the oxygen content.

In the process of making compost, it is necessary to appropriately match the ratio of brown (carbon) and green (nitrogen), in addition to adding fallen leaves and vegetable leaves to the soil, the peel should also be appropriately added with some bone meal, coffee grounds and egg shells.

In the process of composting, water is generally added once a week, and some brown sugar water can be added appropriately when adding water, and stirring properly when adding water is added, so as to make the compost better decomposed and fermented.

When composting, you can turn the compost bin regularly, which can reduce the composting time, so as to increase oxygen, so that the compost can rot and ferment faster. It is also very simple to tell whether the compost is completely decomposed, as long as there are no impurities in the compost and there is no smell, then it proves that it is completely decomposed.

Homemade compost from rotten vegetable leaves.

First of all, you can collect 2-3 plastic bins, and then cut the barrels and bottles in them to stack them up and make them taller. Secondly, you can drill some small holes in the barrel. Finally, a lid is made from the bottom of the barrel that has been cut off.

Such a perfect compost bin is produced.

First of all, you need to know what the principle of fertilizer production is, and in order to become a compost bin, you may need to put fruit residues and soil in this plastic bucket.

If you want to make a compost bin out of the idle plastic bucket at home, you need to make some drains and lids, add some fallen leaves, vegetable leaves, fruit peels, etc., and add some water every week to stir properly.

Here's how to do the compost bin:

Gather materials. You'll need untreated wood to build a compost bin. Untreated wood is able to be preserved for a long time and will neither affect the composting process nor harm the useful fauna.

Among them, cedar is a wise choice. 4 planks of rice or meters, cut into thirds.

The wood can be used to make the four corners of a square compost bin. Choose rough and unplaned wood. Planks of 8-16 meters are also cut into thirds.

The timber is used to build the four walls of the compost bin. Most compost bins will have a space between the two boards to allow for ventilation; The size of the space depends on whether you use 16 pieces of wood or 16 pieces of wood.

square meters of covers, preferably made of solid wood. The sturdy lid helps maintain a constant temperature in the compost bin. Galvanized nails or coated cassette screws.

At the bottom, two meters of boards are placed, laid flat on the ground, and a meter of wood is nailed to them. The planks of the meter are perpendicular to the planks of the rice.

Cut out centimeters from each meter plate at the bottom so that it is the same height as the meter plate. Then put the plank of the rice on the plank of the rice and nail two nails. Leave a gap between each meter of planks.

While nailing the planks of rice to the piles, be careful to leave a little gap between each board.

Erect the two walls parallel to each other and perpendicular to the planks on the back of the chest. As mentioned earlier in the meters of the plank, measure out the centimeters, drive four nails, and keep each interval equal. The planks of the rice and the planks of the rice that are the back wall are crossed and nailed to complete the third wall.

Make sure that the nails that are nailed into the plank of the meter are completely driven in and do not conflict with the nails that are nailed to the plank of the meter as shown in the steps shown above. Finally, nail the last plate perpendicular to the front of the chest. Repeat this step by nailing three or four meters of wood to the front of the box, remembering to hammer the nail in completely.

For added convenience, hinges can be attached to the front planks for easy removal, or grooves can be added to allow them to slide in or out.

Cover with a square meter lid. You can use a tarp or wood, but a wooden cover is better for storing heat in the long run. You can even consider adding a small wooden handle on each side of the box to make it easier to move.

You can make one or two more of these bins so that you can use them interchangeably. A box mainly holds effective composting materials; the other places the processed (or treated) compost material; The last bin is placed to cover the soil for effective composting.

If you have a discarded trash can or some large plastic buckets at home, don't throw them away. You can transform them into compost bins, which are good for making organic fertilizer and organic fertilizer soil. If you find it too much trouble to make a composter, you can also buy it online or at a gardening store.

Some compost bins will have some hand crank handles that can increase the speed of compost fermentation. However, the composter doesn't need bells and whistles. If laid out outdoors, proper drainage holes and a sealing lid on top are required to basically complete the composting.

It is most appropriate to use a plastic bucket as a compost bin. The capacity of plastic buckets is generally about 60 120 liters, and only when the capacity is large can compost well.

If it is a plastic container that is too small, the compost material will decompose more slowly, and the composting efficiency will be lower. And there are not many substances in it, it will not produce enough heat, and it is difficult to get a satisfactory compost.

Therefore, it is better to use some plastic buckets with a capacity of more than 70 liters to make a compost bin.

When making a compost bin, it is better to make two or three more because when making compost, when one is already done, it can be poured into a new compost bin and the other can continue to compost.

It is not necessary to make a hole in the bottom of the compost bin, as it will increase air circulation and can also cause a dirty floor. In order to replace the ventilation holes, the compost bin can be rotated frequently, which increases the oxygen content.

The compost must be covered and sealed in order to generate more heat. In the process of making compost, the ratio of brown (carbon) and green (nitrogen) needs to be properly matched. In addition to adding fallen leaves and vegetable leaves to the soil, some bone meal, coffee grounds, and eggshells should be added to the peel.

In the process of composting, water is generally added once a week, and some brown sugar water can be added appropriately when adding water. When adding water, stir properly to make the compost better decompose and ferment.

Making a compost bin turns discarded food and plant scraps into nutrient-dense fertilizer while also making the environment cleaner. Here are three steps to make a compost bin:

The first step is to choose the right material. Thicker wood is recommended as it is more durable and less prone to decay. In addition, tools such as iron traces, orange wire mesh, and axes are required.

The second step is to build the box according to the design drawings. The length and width of each plank are indicated on the design drawings, and the longer planks are arranged in a line, and other planks are added to this line, which are securely held together with barbed wire.

The third step is to prepare the stacked materials. Place the compost bin in the right place and start filling it with materials such as food and plant scraps, strawberries, insect eggs, and animal waste. Be careful to avoid putting non-biodegradable garbage such as non-ferrous metals and plastics to avoid odors in the compost.

In general, making a compost bin does not require a lot of professional knowledge and equipment, only the right materials and meticulous operation are needed to make a practical and environmentally friendly compost bin. At the same time, the use of compost bins to make fertilizer is also a beneficial home practice.

The method of using <> compost bin is very simple, first put the prepared materials into the compost bin, then fully turn the box and seal the box, and after six months, you can open it and use the fertilizer inside. There are three kinds of compost bins: tire towers, rotary boxes, and beehives, among which beehives are suitable for composting in the garden, and the beehives have beautiful appearance and good sealing.