How do novices paint? What should I pay attention to when painting?

Painting is a more important link, and the painting process is more, the construction period is longer, if you don't brush well, the overall effect is very poor. If you encounter some bad decoration team construction, it is easy to cut corners and other problems. So, let's introduce how to paint for novices and what to pay attention to when painting.

How to paint the steps for novices.

1. Preparations.

It is necessary to protect the windows, doors and other places that will come into contact with the paint with things to avoid the paint falling off and affecting the appearance.

Steps. 2. Toning.

Adjust the color of the paint well, so that the color of the paint is uniform, and avoid water stains.

Steps. 3. Brush construction.

After the roller is painted, use a brush to repair the corners of the wall, especially the joints and the corners of the wall.

Steps. Fourth, polish the wall.

After the paint is dry, you can use sandpaper to sand, so as to reduce the brush marks on the wall, make the wall smooth, and after sanding, you need to clean the wall thoroughly.

Steps. Fifth, the wall paint acceptance.

After the paint is completely dry, you can carry out acceptance and check whether the wall paint color meets the requirements, whether the paint color is consistent, whether the paint surface is uniform, whether there are blistering and other quality problems.

What to pay attention to when painting 1. The base putty is not scraped flat.

In order to save time and workload, some construction teams did not scrape the grassroots putty, and then they were in a hurry to do the follow-up period.

2. Save the grinding process.

After the putty and primer are dry, be sure to sand them with sandpaper to reduce the brush marks on the wall and make the wall smoother. However, some construction personnel, in order to save time, simply carry out grinding treatment, so that the wall is not smooth enough.

3. Reduce the number of brushing times.

Painting is generally one primer and two topcoats. However, some construction teams, in order to cut corners, will not paint the primer or only brush the topcoat once.

4. The paint is mixed with too much water.

When painting the paint, it should be noted that some construction teams will mix too much water when mixing the paint, so that the paint is relatively thin, and the wall paint film is too thin, which is easy to be scratched and moldy.

5. Replace the paint with inferior charges.

It is necessary to pay attention to the inferior and good replacement coatings, and replace the high-quality paints they purchased with inferior and shoddy products, if the owners do not know how or are careless, it is difficult to find this problem.

Steps. 1. Preparations.

Protect windows, doors, furniture and other places that can come into contact with paint to avoid paint falling off and affecting the appearance.

Steps. 2. Toning.

The color of the paint should be adjusted well, so that the color of the paint is uniform, and the water stain pattern is prevented.

Steps. 3. Brush construction.

After painting with a roller, use a brush to touch up the edges and corners of the walls, especially some joints and corners of the walls.

Steps. Fourth, polish the wall.

After the paint is dry, it should be sanded with sandpaper, which can reduce the brush marks on the wall and make the wall smoother, and the wall should be thoroughly cleaned after sanding.

Steps. Fifth, the wall paint acceptance.

After a while, wait for the wall paint to dry completely, so that it can play a protective function. Then carry out the wall paint acceptance, check whether the color of the wall meets the design requirements, and whether the color of the paint is consistent. In case there are quality problems such as penetration, missing brush, blistering, etc.

When the paint is bought, it is white, what color paint you need, you can buy matching pigments, and fully stir according to the proportion of pigments prepared by the color plate.

It is best for novices to brush one road at a time, so that in order to prevent some places from not being brushed, and there will be no textures, of course, in the process of brushing, it is best to adjust the proportion first and then brush.

Nowadays they love their work when it comes to renovating a house, such as painting a wall or painting a wall. Painting the wall directly is fun and saves you on your innovations. If the wall is painted with paint is not good, it is just not smooth, as well as affecting the decorative effect of the wall, causing blisters, cracks at the end, as well as many other disadvantages of the cultivation shed problem.

1. Prepare the materials, before we start the construction, we need to go to the store to buy the appropriate materials, such as wall paint, brushes. The choice of tool, since we can choose a tool with a better recommended quality, we will have a heavier texture better, so that you can guarantee a long-lasting paint coat, the original color of the bottom cover of the brush should withstand the degree, repeated scrubbing.

2.How to paint yourself, to clean the wall, brushing is a very important process in the room finishing, if the quality of this process is not enough, it will directly affect the decorative effect of the wall. Therefore, it is necessary to clean the walls.

You can use a special cleaner or water to wipe the dirt off the walls and keep the walls dry. If the walls are peeling or uneven, cement mortar should be used, and then the remaining material should be shredded for the next process.

3, how to paint yourself, to carry out wall repair, for the unpainted wall, wipe a certain effect is better, it will be a bit bumpy here, we regularly investigate the application, polish the dry wall protrusions, these plaster walls before collision or potholes to soften and clean the floating dust.

4. Putty putty, this process is especially important, generally speaking, we need to scrape the putty three times, so that the wall can show a more uniform number. The first time we use the scraper and wait until the second time we scratch the entire vertical and dry the putty sandpaper for cleaning, we use the scraper to scrape the wall of the scraper head, paying close attention to the cleaning surface; We need the third wall to be horizontal and allow the entire wall to dry gently and then sand it with fine sandpaper.

1.How to paint yourself, uneven, in order to save, and then correct the time and energy of a grassroots putty, rather than part of the construction team to cut a corner carefully in a hurry to follow up the period.

2, Remove the grinding process, after the putty and primer are dry, sand with sandpaper to reduce brush marks on the wall and soften the wall. However, some construction tenants only do the sanding to save time, so the walls are not flat enough.

3. How to paint by yourself, reduce the number of **, how to paint by yourself, the brush is usually primer and two coats. However, in order to cut corners, some construction teams cannot apply primer or wipe topcoat.

4. How to paint yourself, too much paint, be careful when drawing. Some construction crews use too much water to mix the paint. The paint is relatively thin, and the wall paint film is too thin to scratch or mold.

5. The paint is not good, you need to replace the paint with inferior fillers, and pay attention to replacing the high-quality paint you bought with inferior products. It's hard to find out if the owner is careless or inadvertently aware of this.

You can get it for free

What do you need to pay attention to when painting yourself! Hello, I'm glad to answer for you<> the pro-method is as follows: Step 1:

Sanding the furniture that needs to be painted with coarse sandpaper, pay attention not to polish the corners too much, and keep the original shape of the furniture. If the wood is rotten or the metal has rust spots, or if a small area of paint is peeling, it can be sanded with spinning paper. A large area of paint has come off, and all the paint must be peeled off.

After sanding, use a cloth dipped in water to make it semi-wet, and wipe the powder on the furniture that has just been sanded. Take the fine sandpaper and re-sand, paying attention to the corners as well. Then use a cloth to clean the powder.

Step 2: Brush the paint, take the paint, brush, and open the paint cover. Dip the brush in the paint bucket and don't get too much paint at a time.

The rules for painting are from top to bottom, from left to right. Be careful to paint corners and hidden areas as well. If there is a phenomenon of dripping when painting, pay attention to less paint, do not brush too thick, if the paint is too thick, it will cause dripping.

While the paint is not dry, use a brush to brush the paint away. If the paint has started to dry, wait for it to dry thoroughly, polish the surface with spun paper, brush the surface, wipe it with a damp cloth, and then re-paint. Step 3:

Allow to dryPlace four or five pieces of painted furniture until the paint is dry. If the indoor ventilation is not good or the temperature is too low, the paint will dry slowly. At this time, you can open doors and windows to promote ventilation, or put a heater in the room to increase the room temperature.

If the problem persists, it may be that the surface of the painted furniture is greasy. At this time, the paint can be removed with a chemical paint remover or heat, and the surface of the furniture can be thoroughly wiped clean and repainted. In addition, the painted furniture should be covered with a cover or cardboard before the paint is dry to prevent dust.

Step 4: After the paint is dry, use fine sandpaper to polish all parts of the collapsed furniture again. This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later.

Step 5: Brush the second coat of paint According to the second step above, carry out the second coat of paint. Note that if the paint is too thick, you can add an appropriate amount of thinner, dilute the paint before brushing.

Then continue to dry and sand. When brushing the second coat of paint, if the phenomenon of wrinkling of the paint film occurs, it is usually caused by the second coat of paint before the paint is dry. At this time, the solvent in the lower layer of paint will affect the upper layer of paint and make it wrinkle.

In this case, the wrinkled paint film can be removed with a chemical mercury remover or by heating and repainted. Be sure to wait until the paint is dry before passing it a second time. Sixth, brush the paint for the third time and paint again according to the above steps, so that the paint of the furniture is finished.

Hope mine can help you <>

Do you have any other questions?

What do you need to pay attention to when painting by yourself 1. Pay attention to the paint Paint is a flammable item, and the temperature is high in summer, so it is easy to cause fire due to improper storage. Therefore, summer paint should be stored in a cool and ventilated place, and the storage container must be well sealed. 2. Extend the drying time of wall putty Before painting the wall, you need to scrape the putty first, which generally needs to be scraped 1-3 times, during which the normal dry and medium penetration time is 1-2 days.

In addition, when hanging putty, you should use a dry cloth to wipe the water vapor on the wall clean, try to keep the wall dry, which is conducive to painting the wall. 3. How to deal with the wall that is difficult to dry In summer, it is very easy to appear that "the wall has been dry". During construction, the construction personnel must ensure that the wall base is completely dry before applying the wall paint.

4. Avoid rainy days when painting walls in summer, avoid high humidity or rainy weather. 5. Avoid exposure to the sun on the finished wall. Summers are warmer and the sun is fierce.

Many owners are not clear about the steps of painting, as well as some precautions for painting. This makes it easy for the construction master to take advantage of the loophole. This may cause unnecessary trouble in the future, so today Gu Gu will share with you the steps and precautions for painting.

Everyone who is ready to decorate should take a careful look, and the steps and details can not be ignored, and don't let the construction master take advantage of the loopholes.

Painting can be done in 6 steps:

Painting step 1: preliminary preparations. God is dry.

The preliminary preparation work is mainly to make protective measures for the painted work area. For example, doors, window frames, furniture and paint joints are protected by pasting color separation paper. Finished wooden cabinets, partitions and other furniture should be sealed with newspaper to avoid staining the furniture with dripping paint.

Painting Step 2: Coloring.

For walls with color requirements, the area should be accurately calculated in advance. In order not to have inconsistent colors everywhere, it is necessary to mix the materials required for the coarse in one go. Then there is the primer, which can prevent the wall from being damp, make the color of the topcoat more uniform, and prevent the wood acid of the wood from causing water stains.

Paint painting step 3: roller coating application.

The order of topcoat construction: first the ceiling, then the line, and then the wall. The wall should be painted at least twice, the first paint can be painted with 5% 10% water to facilitate the wall absorption, and the second topcoat can be painted without water, and there is a certain interval between the first coating.

When rolling, it is necessary to use both thick and thin roller brushes at the same time, with the coarse roller brush first and the fine roller brush following immediately. Use a coarse roller to evenly coat the paint on the wall, and then use a fine roller to brush the place where the coarse roller has been brushed, and re-brush it again, so that the wall paint becomes delicate and hole-in, and the desired pattern is brushed.

Painting step 4: brush construction.

Use a brush to touch up the missing areas of the roller construction, such as the edge of the wall and the corner of the wall.

Painting step 5: Polishing the wall.

When the paint on the wall is dry, you can sandpaper the wall to reduce the brush marks on the wall and make the wall smoother. When sanding, pay attention to feel the smoothness of the wall with your hands from time to time to judge the need for polishing. Note that when grinding, try to use finer sandpaper, generally softer putty (such as 821) with 400 500 sandpaper, hard texture (such as wall lining, easy to quack) with 360 400 is better.

After sanding, clean the wall thoroughly.

Painting Step 6: Cleaning and Inspection.

Clean up the paint traces on the foot line and other places, and check whether the color of the wall meets the design requirements, and whether the color of the painted surface is consistent, so as to prevent there are no quality defects such as penetration, missing brush, skin alkali powdering, blistering, biting color, and falling.