How to punch holes in ceramic bowls, how to punch holes in the bottom of porcelain bowls

The tutorial is as follows: First of all, the porcelain bowl must not have cracks, otherwise it will be broken in a dozen. 1. Soak the bowl in water for a day; 2. Prepare a few cement nails, hammers, towels, and preferably wooden backing boards; 3. Put a towel on the inside of the soaked bowl, buckle it on the wooden backing board, take a cement nail, and repeatedly hit it with a hammer at the place to be punched until it is penetrated; Punching holes in the bowl with a nail is a slow job, be patient, don't use too much force, and repeatedly hit the nail in one area.

Hello, the method of punching a ceramic bowl is as follows:

1.First of all, you need to prepare a home hand drill, preferably a hammer, the heavier the better, before punching, use a hammer to knock on the place that needs to be punched, the purpose of this is to prevent the drill bit from sliding when drilling, causing unnecessary injury.

2.The ceramic bowl that needs to be punched has a place that needs to be punched, which needs to be covered with paper for protection, and then glued with tape to prevent cracking when punching. Then position the bowl, make a mark with a pencil, try to select the outer edge of the bowl, and start punching.

3.Be sure to hit it slowly, little by little, you can start with a little less force, and then you can gradually increase the force. After punching the holes, use a paper towel to wipe off the debris that remains.

4.If you want to be more aesthetically pleasing, you can inlay a metal ornament in the perforation.

The above is the method of punching a ceramic bowl, I hope it will help you.

1. Punch holes at the bottom of the porcelain bowl, you can use a hole punch, add a little water at the bottom of the cup when punching, otherwise the friction temperature is too high, the cup can be soaked in water for a few days before operation, so that it is not easy to break, and the space in the cup should be filled with a towel or newspaper, so that the stress point of the nail is not all at the bottom of the jar.

2. Porcelain is a kind of porcelain stone, kaolin, quartz stone, mullite, etc., and the appearance is glazed or painted. The porcelain is formed by firing at a high temperature (about 1280-1400) in a kiln, and the glaze color on the surface of the porcelain will undergo various chemical changes due to the different temperatures. Sintered porcelain tires generally contain less than 3% iron and are impermeable, and are widely used by people all over the world because of their relatively low cost and wear-resistant and impermeable characteristics.

China is the homeland of porcelain, and porcelain is an important creation of the working people of the Han nationality. The invention of porcelain is the great contribution of the Han nation to world civilization, and in English, "porcelain (China)" is the same word as China (China).

First of all, the old bowl must not have cracks, otherwise it will be broken in a dozen. Soak the bowl in water for a day, prepare a few cement nails, a hammer, a towel and, preferably, a wooden pad. Put a towel on the inside of the soaked bowl, buckle it on a wooden pad, take a cement nail, and repeatedly hit it with a hammer on the place to be punched until it is penetrated.

The force does not need to be too strong, and you can hit it repeatedly with a nail in one area. <

Soak in water for 24 hours, stuff it tightly with a wet towel, and then hit it with steel nails.

1. First of all, the porcelain basin must not have cracks, otherwise it will be broken in one dozen.

2. Soak the bowl in water for a day; Prepare a few cement nails, hammers, towels, and preferably wooden pads.

3. Put a towel on the inside of the soaked bowl, buckle it on the wooden backing board, take a cement nail, and repeatedly hit it with a hammer at the place to be punched until it is penetrated;

4. Punching holes in the top with nails is slow work.

5. Be patient, the force does not need to be too large, and you can repeatedly hit it with a nail in one part.

Bowl As a daily necessary eating utensils, the origin of the bowl cannot be verified, but it can be traced back to the Neolithic clay pottery bowl, and its shape is not much different from today, that is, the mouth is large and the bottom is small, the bowl mouth is wide and the bottom of the bowl is narrow. There is a bowl foot underneath, and the height is generally one-half of the diameter of the mouth edge, mostly round, rarely square. What is changing is only the material, the level of craftsmanship and the means of decoration.

The general purpose is to hold food. Most Chinese prefer to use bowls as a eating tool, while Westerners prefer to use plates. Bowl, can take the homonym of the word, which means to retain, can be used as a souvenir.

The symbolism is better.

Summary. Hello, curium porcelain perforated porcelain bowl can use tungsten steel drill bits or diamond drill bits. Tungsten carbide drill bits are suitable for thinner porcelain bowls, while diamond drill bits are suitable for thicker porcelain bowls.

When using, it is necessary to pay attention to maintaining a stable speed and pressure to avoid the bowl from breaking or cracking. It is recommended to mark the position on the bowl before punching the hole, and use tape or other means to fix the bowl to avoid movement and shaking.

Hello, curium porcelain punching stuffy hand porcelain bowl can use tungsten steel drill bit or diamond drill bit. Tungsten carbide drill bits are suitable for thinner porcelain bowls, while diamond drill bits are suitable for thicker porcelain bowls. When using, it is necessary to pay attention to maintaining a stable speed and pressure to avoid the bowl from breaking or cracking.

It is recommended to mark the position on the bowl before punching, and use tape or other means to fix the bowl to avoid movement and shaking. Chunru.

Approximate speed with and with what water to cool down.

It is recommended to use tungsten carbide drill bit or diamond drill bit, the speed is about 1000-2000 rpm, and tap water or coolant can be used for cooling the water hail. Pay attention to safe operation, wear protective glasses and gloves.

Install the drill bit, pinch the hoist mouth of the rubber drill, rotate it in the opposite direction, disassemble the drill bit, and then rotate it forward and replace it with a new drill bit. Soft mats or plastic styrocardboard boxes are placed on the floor, and flower pots are buckled upside down on the soft mats. At a 45-degree angle, the drill bit slowly touches the bottom of the pot, and the crescent alveolar marks are opened to play a positioning role, and then the drill is positioned vertically.

The two worked together, taking water and slowly pouring it on the flower pot to cool the drill when drilling, and always observing the drilling depth. <

1. Install the drill bit, pinch the gourd mouth of the rubber drill, disassemble the drill bit after reverse rotation, and then rotate it forward and replace it with a new drill bit.

2. The soft cushion or plastic foam carton is placed on the ground, and the flower pot is buckled upside down on the soft cushion.

3. At a 45-degree oblique angle, let the drill bit slowly touch the bottom of the flower pot, open a crescent alveolar trace, play a positioning role, and then straighten the electric drill to drill vertically.

4. Two people work together, take a bottle of water and slowly pour it on the flower pot to cool the drill, and observe the drilling depth at all times.

5. Reduce the force when approaching drilling, and loosen the electric drill in time when the flower pot is drilled through.