What wire is suitable to wrap around it?

It is a quick and convenient way to process and shape tree bonsai with metal wire. According to the thickness and hardness of the trunk and branches, the operator selects metal wires of different thicknesses to wrap around them, and uses the plasticity of the metal wire to change the original shape of the processing object and create an ideal shape. This method is simpler and easier than the brown silk cutting technique, and is widely used in tree bonsai processing.

For the metal wire used in processing tree bonsai, professional workers mostly use specially produced bronze-plated aluminum wire, which has complete specifications and is very applicable, and the color is very close to the bark. Amateurs often choose a variety of copper, iron or aluminum wires according to their own conditions. The author thinks that copper wire is better, followed by aluminum wire.

Although the wire is cheap, it is easy to rust, and after being tied to the tree for a long time, the hardness will increase, and it is more difficult to dismantle.

To process tree bonsai with wire, it is necessary to master certain processing skills. The order of processing is the main stem first and then the branches, and the large branches and then the small branches, but sometimes it is not necessary to complete one branch at a time, but first wrap each main branch with a wire, and then arrange the angle and position of each branch to determine the overall structure. After the shape is determined, wrap each branch with a metal wire of appropriate thickness and treat each detail.

Combined with pruning during processing, some unwanted branches are removed.

There are ten points to pay attention to when using wire to build trees:

When winding the trunk, one end of the wire should be inserted diagonally into the potting soil close to the base of the trunk, inserted to the bottom as much as possible, and then wound the trunk from the bottom to the top, and bend after the winding is completed.

When wrapping each branch, the start must be fixed first. The method of fixing, generally is to bend one end of the wire into a hook shape first, hook on the larger branch in front, when winding the first circle, to press the end of the hook, and then circle forward winding. The angle of winding (the angle between the wire and the branch) is about 45 degrees, but it can be slightly looser.

To wrap, pinch the wire and branch with one hand and wrap it forward by grasping the wire with the other. As the wire goes around forward, the latter hand follows closely behind to tighten the wire and the branch to prevent the wire from migrating and damaging the bark.

When winding, clockwise or counterclockwise can be used, but the direction in which the wire is wound should be consistent with the direction of the twisting of the branch. In this way, the wire is close to the branches, which is conducive to bending and straightening, otherwise it is loose and weak, affecting the modeling effect, and at the same time it is not beautiful. The winding wire should not be too dense or too sparse, and the distance and angle of each circle should be roughly equal, so that the force is more uniform and more beautiful.

Sometimes encounter a harder branch, after wrapping a metal wire, find that its strength can not effectively make the branch bend and shape, at this time can add a metal wire, next to the previous metal wire for winding in the same direction, rely on the strength of two metal wires to achieve the purpose of adjusting the form.

The ductility and electrical conductivity of the metal are related, the better the conductivity of the metal, the better the ductility of the metal, and the less resistive the metal is the easier it is to elongate. If you want to stretch it, you can stretch it into a single molecule, but it depends on technology!

Under normal circumstances, copper wire will be better and practical, but you should be careful about assembling electricity and the like.

Like copper wire, it can only be used easily after being annealed or annealed, while aluminum wire is flexible, has little repulsion, is easy to bend, and can be used repeatedly. Nowadays, most of the climbing materials are mostly used in aluminum wire. For the color selection of the wire, there is not too much attention to the difference in color.

Most of the black wires can fade to bronze, and the color that is closer to the bark of the tree is more beautiful.

Many do, like gold, silver, copper, tin, iron, tungsten, and many more.

Metal can be drawn into a very long line, which is determined by the nature of the metal itself, our teacher said that one gram of ** can be drawn into a 10 km long line.

Aluminum, iron can be, copper costs too high.

There is basically nothing in metal materials that meets your needs.

I think memory alloy should be used, but it is too expensive, you might as well use solder wire, which is easy to bend, clean, and very bright.

And cheap.

This should be malleable.

Find out what metals are the most malleable.

The malleability of gold is very good drops.

The most malleable metals are gold and platinum.

Stolen gold, inexpensive and easy to use.

Gold, iridium, aluminum, tin, tin, platinum

I don't know if there is any harm!

Dizzy!Iridium may be radioactive! Are you going to use it?

Iridium. Why not ask about my iridium?

This metal is comparable to gold, and it is not as expensive as gold

Take a look at his introduction in the encyclopedia, and you will understand

Are you looking for the legendary red gold thread again?

Iron wire, copper wire is OK, first of all, adjust the angle and position of each branch, first determine a whole tie, when some thick branches are bent, the winding wire can not reach the strength of twisting and bending. At this time, another wire should be added. There are also many species with thin bark that can easily cause damage when tied up.

To prevent this from happening, you can tie it with a wrapped wire.

When bonsai is punished, aluminum wire should be used, because aluminum can form an oxide film to prevent metal corrosion in humid air, which is very helpful for bonsai. When pricking, start from the base of the tree and wind upwards at an angle of 30°.

Aluminum is the best, soft steel is also OK, it is better to find a thinner and softer material, easier to weave, and brighter to look good.

Wires have some memories. The wire is wrapped around a thin iron rod and released to be straightened. It's impossible.

The diameter of the metal pie wire is too small, and if it is measured directly with a scale, the error is too large.

However, if you wrap the wire around a pencil and measure the sum of the multiple diameters of the wire, and then divide it by the number of turns of the wire, the total error is as good as when you measure the diameter of the wire directly, but on average, the error is much smaller.

The diameter of the wire is too small, and if it is measured directly with a scale, the error is too large. However, if you wrap the wire around a pencil and measure the sum of multiple diameters of the wire, and then divide it by the number of turns of the wire, the total error will be the same as when you measure the diameter of the wire directly, but on average, the error is much smaller!

This can increase the accuracy of the measurement and reduce the error; Theoretically, the error of measuring n turns is 1 n of the error of measuring a single root;

Tight rowing is to reduce errors.