How should the main stem of the spring flower be treated to grow thick quickly?

Most of the spring flowers are replaced by roots, and it is possible for the trunk to increase and thicken rapidly, and the healthy growth of spring flowers is the primary prerequisite for rapid growth. Subsequently, the use of pruning, free-range, and timely replenishment of nutrients can quickly make the trunk of the spring flower grow and thicken quickly.

The soil quality of the maintenance of spring flowers is regulated, and the loose and slightly acidic soil with good air permeability. The first way to grow quickly is free-range. Give full play to the advantages of the relatively developed root system of spring flowers.

The pots are lined with coarse sand or crushed laterite bricks. Then a layer of all-humus, 3 to 7 cm, is covered with fine sand to isolate the rhizomes from humus contact. The soil quality of planting should be mixed with pastoral soil and humus soil and coarse sand.

The early spring flowers grow in the mixed soil, and the rhizomes are more developed in the middle and late stages, and the nutrients provided by the bottom fertilizer humus soil. Spring flowers will grow quickly.

Spring flowers should be maintained in a naturally ventilated and well-lit astigmatism location, and it is best to isolate sunlight for 5 to 7 hours in the morning, noon and evening. The growth temperature is between 15 and 30. The relative humidity of the air reaches above 65%.

Irrigate the spring flowers, observe the dryness and wetness of the potting soil, and ensure that "if it is not dry or watered, it will be watered thoroughly". Then apply the spray method to hydrate the branches and leaves. Increase the ambient humidity of the air.

In the case of free-range flowers, the first application of ripe soybean cake fertilizer, farmhouse manure, irrigation and spring. It gives various nutrients based on "nitrogen" to promote the growth of branches and leaves. A small amount of "phosphorus and potassium" compound fertilizer is applied to promote the growth of rhizomes and improve the level of disease resistance.

To increase the size and thickness of the trunk, the top branches should be removed, so that the trunk can grow, and the nutrient water will be driven to the trunk.

Lower the apical bud so that the growth is more focused on the trunk. It can make the main rod grow rapidly. Removing the growth superiority of the top, nutrients will be provided in large quantities, and it will be able to grow rapidly in a short period of time.

In short, the maintenance of spring flowers needs to be very star-studded to be able to make its trunk grow rapidly, if you don't care for it, it is difficult to ensure its growth effect.

In order to make the main trunk of the spring flower grow thick, you can cut off all the branches below, add some fertilizer with high potassium content such as plant ash, and the main trunk can be shaped with a thumb thick. If you want to make its trunk thicker, you also need to get even sunlight. It can also be propagated by pressing strips, so that the new seedlings will grow with thicker branches.

The attached branches on the main trunk can be cut off and potassium-containing fertilizers can be applied, which can promote the thickening of the main trunk.

For the main trunk of the spring flower, if you want to grow quickly, first of all, there should not be too many plants around it. Then there must be enough moisture, and the temperature is moderate.

1. Spring flowers grow fast.

2. If you want to grow faster than the spring flowers, the roots and branches of the seedlings are more stout, you need to water the spring flowers properly to ensure that there is no water accumulation, but you can not lack water, so that the soil is dry and wet alternately, which is very beneficial to the growth of the spring flowers, and the growth of the spring flowers is also inseparable from fertilizer, if the nutrients in the soil are sufficient, the spring seedlings will grow better, we can properly fertilize the spring flowers, deliver nutrients to the spring flowers, and properly prune the spring flower seedlings, so that the spring seedlings will grow more healthily.

3. In order to make the spring flowers grow better, it is necessary to properly loosen the soil for the spring flowers, so as to avoid soil compaction, usually as long as the soil is moist, you can point to the noise, some people will also use cuttings to make the spring seedlings grow stronger, but it takes a long time, and there are still fewer people who use this method.

4. Pay attention to soil temperature and fertilizer.

1. Adding potassium-containing fertilizers is conducive to promoting the absorption and development of roots.

2. Properly loosen the soil for spring, which is conducive to the ventilation of the roots and promotes the respiratory development of the roots.

3. According to the growth direction of the roots, the lateral roots should be cut off appropriately, so that the nutrients are mainly used for the development of the taproot.

4. Proper watering to make the roots moist and prevent soil compaction.

5. You can use the method of cuttings, when the branches are semi-lignified, inserted in the sand and soil, keep the moisture, and it takes about 15 days to take root, and then separate from the mother plant in the spring of the next year, you can cultivate a plant with very thick roots.

This is the method for the rapid growth of spring flowers planted in bonsai: suitable environment, sufficient nutrition, pruning, and soil turning. Although the method is for the spring flowers planted in the bonsai, the principle is universal.

1. Choose a suitable environment to place the spring flower bonsai. Generally, the spring flower bonsai is placed in a moist and sunny place, in addition, if the weather is relatively hot, then we need to do a good job of shading treatment, after the spring flower bonsai enters the growth period, we need to do "not dry and not watered, watering is watered", to avoid potting soil water, otherwise it will cause rotten roots.

Second, do a good job of water and fertilizer management at different times

1. Spring flowers will enter the flower bud differentiation period from June to August, in order to promote the formation of flower buds, we need to do a good job in the management of water and fertilizer, at this time we need to increase the use of phosphorus and potassium fertilizers, and at the same time do a good job of water control, which is conducive to the formation of flower buds;

2. After entering September, it is necessary to reduce the frequency of watering, so as not to control the growth of branches and allow spring flowers to safely overwinter.

3. Do a good job of top dressing. Before the spring flowers bloom, you need to apply some fertilizer, which can not only make the flowers fat, but also prolong the flowering period; In addition, after the spring flowers bloom, we need to apply the well-rotted organic liquid fertilizer 1 to 2 times to supplement the nutrients consumed by flowering, so that the plant growth can be restored as soon as possible. The ash of plants and trees in the soil contains potassium fertilizer, which in turn accelerates the growth of the root system.

3. Do a good job of pruning, so that the spring flower bonsai can maintain a beautiful posture. Spring flowers germinate strongly, in the process of growth, people should be according to the needs of modeling, some unwanted branches and buds are cut off, and the head is plucked, in order to control the growth of branches, keep the tree shape beautiful, in addition to the dry branches, diseased branches, long branches cut off, at the same time before flowering a more detailed pruning, so that it is dense and dense, with a perfect attitude to welcome the new year.

During the dormant period, long branches and various branches that affect the shape of the tree can also be cut off. At the turn of spring and summer, during the vigorous growth period, appropriate topping and tip removal can be carried out to promote the formation of flower buds and maintain the beauty of the tree shape. During the growth period, the topping is often plucked to promote the thickening of the branches, increase the branches, which is conducive to modeling, and the branches that affect the shape of the tree should be cut off in time to maintain the beauty of the bonsai.

Fourth, do a good job of turning the pot. Every 1-2 years, the bonsai should be repotted, at this time, some excessively long roots or rotten roots will be cut off, and at the same time replaced with new soil, to provide a good environment for the bonsai to grow, so that the spring bonsai will continue to maintain a good growth trend.

Potassium-containing fertilizers such as plant ash are applied to the potting soil to accelerate the growth of the root system. When it grows for four to five years, the taproot is the thickness of a thumb and can be potted. In late autumn or before the Qingming Festival, the whole tree will be dug up, shake off the root mud, carefully observe the growth of the root system, after the approval of the roots, cut off the lateral roots and fibrous roots next to the main root, and cut the branches according to the shape design, so as to prepare for the gradual modeling and cultivation in the future.

Two-thirds of the taproot left for the stem is buried in the pot culture soil, and one-third is exposed as the main trunk. In the following year, rinse the potting soil with water to allow the main trunk buried in the soil to slowly expose the soil and stones. Rinsing should be carried out several times, each rinse, cut off the fibrous roots next to the main stem in time until the desired effect is achieved, so that the main root becomes the main trunk of bonsai.

1. How to make the root tremor system thicker.

1. Maintenance environment: Yingchun flowers prefer a more acidic maintenance environment for growth, after planting for a period of time, you can apply some home vinegar for spray maintenance, so that the roots of Yingchun flowers can be coarse and strong.

2. Pruning: If you want its roots to grow thick, you need to leave the main trunk and prune all the other small branches, which can prevent those thin branches from taking away the nutrients of the plant, so that the main trunk of the plant grows poorly and is not thick.

3. Fertilization: In its growing season, it needs to be given sufficient nutrient needs, so that its branches will grow vigorously and grow thicker and thicker.

Second, how to tie the shape.

Its practice is usually to use a few thin wires around the bottom of the spring flower from the bottom to the top of the circle to fix the shape you want, and slowly tie the branches to fix. Over time, the plant will grow in line with its intrinsic growth state.

In the basin soil, you can add some substances, such as ash powder and other things containing potassium fertilizer, so that the growth process of the root system can be accelerated. The formation of thick roots is to be expected.

Generally speaking, there are four to five years in size, and its main root length will be as thick as a thumb, so we can carry out the operation of potting. The day before late autumn, or the day before Qingming, what you need to do at this time is to dig out the whole tree, shake the loose soil attached to the roots, carefully study the growth direction of the roots, and after determining the future root system, cut off all the lateral roots and fibrous roots except for the roots we need. The shape of the branch cut must be done with care, so that the shape will remain standard in the future.

Two-thirds of this main root is buried in the soil, and the rest is in the air.

The next year, the pot is washed with water to allow the main trunk of the buried soil to be slowly exposed. Rinse many times, once each time, and cut off the unwanted roots in time until the desired effect is achieved, so that the taproot becomes a bonsai.

Rough roots can be cultivated using cuttings. This can be done in spring, summer, and autumn, and if the branches we need are semi-lignified, inserted in sand and soil, and retain moisture, it will take about 15 days to take root. If you bury long branches in the sand without carving, you can take root in about 40-50 days, and then separate from the mother plant in the spring of the next year, and you can grow a plant with very thick roots.

Spring flowers: also known as spring flowers, yellow frangipani, golden belts, deciduous shrubs. The height of the plant is 30-100 cm.

The twigs are slender or arched and drooping, and are draped. The 3 leaflets compound leaves alternately opposite, the leaves ovate to rectangular round. The flowers are solitary on the branches of the previous year, open before the leaves, have a fragrance, golden yellow, dyed red, and bloom from February to April.

It is named because it blooms the earliest among the hundred flowers, and the spring of a hundred flowers blooms immediately after the flower.

1. Prune: Directly use sharp scissors to cut off the excessively long branches. 2. Provide light:

Place the spring flowers in a well-lit place to provide them with full sunshine. 3. Reasonable fertilization: apply compound fertilizer or organic fertilizer during the growing season.

4. Appropriate amount of watering: After the soil dries up, it is necessary to replenish water in time, and the stagnant water must be discharged in the rainy season.

1. Prune

The branches of the spring flowers are too long to be pruned in time, and sharp knives should be used when pruning to ensure that the cutting edge is flat, and the excessively long parts should be cut off directly, and attention should be paid to the retention of 2-3 bud points on each spring flower branches, which is conducive to the germination of new branches.

2. Provide light:

Spring flowers are very light-loving plants, whether they are potted or ground planted, to meet their needs for light, to provide all-weather sunshine for plants, if the spring flowers are maintained in a shaded environment for a long time, the branches are easy to grow, which will affect flowering.

3. Reasonable fertilization

In order to promote its vigorous growth, it is recommended to apply thin fertilizer frequently, mainly with diluted compound fertilizer or organic fertilizer, pay attention not to apply thick fertilizer and raw fertilizer to the spring flowers, otherwise fertilizer damage will occur.

4. Watering appropriately

Spring flowers have a certain degree of drought tolerance, but the growth stage consumes a lot of water, found that the soil is dry to water in time to ensure that the soil is slightly wet, and spring flowers are not resistant to waterlogging, if it encounters continuous rainy days to drain the water in the soil in time.

The thin branches of the spring flower may be the plant characteristics of the plant, the spring flower belongs to the shrub, and its branches are slender, or it may be the lack of nutrients and light provided for the plant in the process of maintaining the spring flower, resulting in poor plant growth, or it may be that the soil provided for the plant in the process of planting the spring flower is not suitable for the growth of the plant, so the branches of the spring flower are slender.

1. Plant characteristics

Flowers are shrubs, and their branches are already slender, so it may be normal for them to have slender branches. At the same time, it is necessary to provide proper water for the spring flowers when maintaining them, keep the soil moist, so that the spring flowers can grow better, and pay attention to the amount of watering when providing water for the plants to avoid overwatering.

2. Soil discomfort

The thin branches of the spring flowers may be due to the fact that the soil provided for the plants when planting the spring flowers is not suitable for the growth of the plants, and the soil needs to be replaced and the spring flowers need to be replanted. Spring flowers are suitable for growing in soils with rich nutrient content and good air permeability, and it is best to replace them with sandy loam soil with rich organic matter content.

3. Insufficient light

The thin branches of the spring flowers may also be due to the lack of light provided for the plants in the process of maintaining the spring flowers, resulting in the plants being unable to photosynthesize normally and obtain nutrients for growth, so it is necessary to provide appropriate light for the plants when maintaining the spring flowers, so that the plants can photosynthesize normally and grow healthily.

4. Lack of nutrients

The thin branches of the spring flowers may also provide too little nutrients for the plant in the process of maintaining the spring flowers, resulting in the root of the plant being unable to provide more nutrients for the plants, so that the plant grows poorly, so it is also necessary to provide appropriate nutrients for the plants when maintaining the spring flowers, so that the plants can grow stronger.