What should I do if the water valve on the water tank can t be turned off?

What should I do if the water inlet valve of the water tank keeps flooding.

First of all, put the angle valve that controls the water source.

Turn it off, and see why the water doesn't stop. If there is a foreign object, aging or damage to the water stop cover, which causes water to continue to enter, clean it or replace it with a new one. If the special-shaped nut is deformed or damaged, replace it with a new special-shaped nut and tighten it.

If there is a foreign object blocking the water closing valve, clean the water closing valve.

How to buy a toilet.

1. When purchasing, the toilet must be visually glossy.

Because the toilets on the market are generally ceramic toilets, and the higher the density of the ceramic, the higher the gloss, which means that the quality of the toilet will be better.

2. See if the glaze is uniform. When choosing, you can use your hands to touch the toilet drain to see if there is glaze. If so, feel whether the glaze is delicate enough.

Generally speaking, the glaze is more delicate, it is not easy to store swag, and it will be more convenient to clean. If it is said to be rough to the touch, it cannot be selected, indicating that the toilet is of poor quality, easy to store stolen goods, and produces peculiar smells.

3. a toilet.

of the flushing method. Nowadays, the toilet bowl on the market is cleaned by flushing and siphoning.

Both. It is recommended that when choosing, you can try to choose a toilet with a siphon flush method, because a siphon flush can flush the toilet more cleanly and will not flush water everywhere.

4. The water consumption of the toilet. After the toilet is bought, it needs to be used for a long time, so in order to save the amount of water used, it is necessary to reduce the cost of living. When choosing a toilet, you should also consider the amount of water used in the toilet. Try to choose one that saves water.

The toilet will be better.

There is no good way to change a new valve to solve, valves are disposable consumer goods can not be repaired, they will not change a hydraulic master to solve it, I don't know to find ** can take photos of the valve to the plumbing store, the store has professional installation and maintenance personnel can directly come to the door to repair and install.

If you can't turn off the water on the tank, then it may be because the valve is broken, in this case, you can only replace the water valve of the tank.

Remove the blue cover first, and then put the strut, the black rubber ring at the end of the strut is used to seal the small hole, and the rubber ring in the small hole is not tightly sealed, resulting in the water inlet valve cannot be closed.

The toilet tank water can not be closed, to see the water level of the water tank first, the water level is high and the water leaks from the overflow port, which is generally the failure of the inlet valve and cannot turn off the water, and the low water level is generally the failure of the rubber plug of the flush valve.

The flush valve is just to check, troubleshoot or replace the damaged parts, and the most correct thing is to replace it as a whole.

What to do if the toilet tank valve can't close the water Hello, the pro is generally caused by different reasons, to find the reason corresponding to the solution: 1. Look at the water level of the water tank. If the water level is high and the water leaks from the overflow, it is generally the failure of the inlet valve to close ominously to keep the water open; If the water level is low, it is generally a problem of the failure of the flush valve rubber plug.

2. The pontoon assembly is not installed properly, resulting in the pontoon cannot float up and down flexibly. At this time, you need to clean up the debris and adjust the appropriate position. 3. The position of the pontoon is adjusted too high.

At this time, you need to pinch and adjust, lift the rack up, and adjust the pontoon down.

If the water valve is broken, you can replace it with a new one, if there is no pressure in the inlet water and there is no water, you can consider installing a pressurized pump, which can solve the method of pressurizing the tap water, remember to install the pressurized pump in the main valve of the home.

If the PPR pipe is too wide during the welding process, resulting in a smaller inner diameter of the pipe, and then there is a blockage, in this case, there will be water dripping, and it can be re-welded, so as to ensure the smooth flow of water sources.

Why doesn't the water come out after the water valve is opened? It is estimated that the water valve is broken, and the water valve will have this kind of problem after a long time, especially if the individual valve is not opened for a long time, such as not closing the valve for a long time, it will lead to the situation that the valve is not closed strictly, and it will not be closed for a long time, which will lead to the situation that the valve core is bonded and cannot be opened.

If there is no water coming out after the water is boiled, the first thing to check is whether the main switch of the water valve is closed or the faucet filter is blocked, or it may be that there is no water bill and it is time to pay the water bill.

It must be a water outage, or an area pipe is turned off, and see if you're the only one, so there's no water in the pipe. There may be another valve in control.

Maybe there is no water, you can contact the relevant personnel to deal with it, if it doesn't work again, the water should be stopped, you don't need to care.

Hello dear! I'm here to answer your questions, and I'm glad you asked! What to do if the toilet tank valve can't close the water; It is generally caused by different reasons, and it is necessary to find the cause and solve it accordingly

1. Look at the water level of the water tank. If the water is high and the water leaks from the overflow, it is generally the failure of the inlet valve to close the shed to let the water; If the water level is low, it is generally a problem of the rubber plug of the flush valve. 2. The pontoon assembly is not installed properly, resulting in the pontoon cannot float up and down flexibly.

At this time, you need to clean up the debris and adjust the appropriate position. 3. The position of the pontoon is adjusted too high. At this time, you need to pinch and adjust, lift the rack up, and adjust the pontoon down.

<> the reason why the water valve can not be closed may be that it has been used for a long time, and there is aging, which leads to the loosening of the connection of the water valve, and the water will not be able to be closed. The water level valve is a valve to prevent the phenomenon of backflow of medium, water hammer and water hammer. The multi-functional water level valve is installed on the outlet pipeline of the water pump with the water supply dust system of high-rise buildings, and one valve has three functions: electric valve, check valve and water hammer eliminator, which can effectively improve the safety and reliability of the water supply system.

If there is no water valve, the control of the effluent will be affected to a certain extent.