Jaeger LeCoultre aftermarket repair watch damp? Jaeger LeCoultre watch repair point

If it is the problem of moisture in the after-sales maintenance watch, it is necessary to bear full responsibility within a certain maintenance period.

The watch is a sealed environment, and it is difficult for water vapor to volatilize on the dial, and if it is placed too long, it will cause the parts inside the watch to rust. The cost of different models of the same watch is also different, it is recommended to call ** for detailed consultation.

Find someone from the repair company and ask clearly, what happened when the watch got wet?

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

If it is close to the maintenance center, it is recommended to send it to the maintenance center for demagnetization. The degaussing machine in professional maintenance is generally imported, the degaussing is more thorough, it only takes a few minutes, and the maintenance fee is relatively cheap, so if there are conditions, it is better to send it to the maintenance center for demagnetization.

If there is a problem with the watch, it is better to send it to the watch after-sales center for maintenance as soon as possible. Wanling Hui has an after-sales service, don't go to those small repair shops for maintenance. Not only are they not empowered, but their technology is not professional enough.

The instruments are not very sophisticated. **It's also misreported. It will also cause the watch to be out of warranty.

The reason for the moisture of the Jaeger-LeCoultre watch after-sales repair watch may be the aging of the watch waterproof ring, if the moisture is not serious, you can deal with it according to the following methods:

Method. 1. Put the mechanical watch facing inwards and the bottom shell facing outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Room 1207, Block B, China Resources Building, No. 1366, Qianjiang Road, Jianggan District, Hangzhou City, Zhejiang Province].

Method. 2. If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near the 40-watt light bulb, bake for about 30 minutes, and the water vapor in the table can be eliminated. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and maintain it to prevent the parts inside from rusting.

Method. 3. Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will all disappear. This method of processing is simple and economical, and does not compromise the accuracy or longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

If a mechanical watch gets wet, the best way is to go to a watch repair shop to have it tested and polished, which can prevent serious rust and corrosion of the watch with less cost. If the movement is corroded, the watch will be scrapped and the loss will be great, so it is important to prevent accidents.

Jaeger-LeCoultre's maintenance network is located at Room 2606, Block B, China Resources Building, The Mixc, No. 1366 Qianjiang Road, Jianggan District, Hangzhou.

Since Jaeger-LeCoultre is one of the world's top 10 watches, belongs to the top Swiss watch brands, and is on the same level as Patek Philippe, Audemars Piguet and other famous watches, so Jaeger-LeCoultre is in the class of top luxury watches.

Introduction to Jaeger-LeCoultre watches

Jaeger-LeCoultre is a Haute Horlogerie manufacturer based in Le Sentier, Switzerland. Since its founding in 1833 in the Vallée de Joux, Switzerland, it has become an important watch brand in the history of watchmaking.

As a pioneer in the premier watchmaking industry, he not only combines precision timekeeping technology with exquisite artistic talent, but also makes outstanding contributions to the development of the entire watchmaking industry. Jaeger-LeCoultre has been part of the Swiss luxury goods group Richemont since 2000.

Jaeger-LeCoultre's master watchmakers, engineers and designers work closely together to pursue technological innovation while following the tradition of watchmaking, with a passion for each timepiece they make. Each masterpiece is the result of 185 years of Jaeger-LeCoultre watchmaking. Nearly 40 state-of-the-art craftsmanship are seamlessly blended with the noble traditions of the Vallée de Joux in the making of timepieces.

With a total of 1,231 movements and 398 registered patents, Jaeger-LeCoultre continues to surpass itself and become a model in the world of fine watchmaking.

Jaeger-LeCoultre watch repair and maintenance outlets include Tianjin Repair Service Center, Chengdu Jaeger-LeCoultre Repair Service Center, Nanjing Jaeger-LeCoultre Repair Service Center, Changsha Jaeger-LeCoultre Repair Service Center, Zhengzhou Jaeger-LeCoultre Repair Service Center, etc.

1. Tianjin Maintenance Service Center.

2. Chengdu Jaeger-LeCoultre Maintenance Service Center.

3. Nanjing Jaeger-LeCoultre Maintenance Service Center.

4. Changsha Jaeger-LeCoultre Maintenance Service Center.

5. Zhengzhou Jaeger-LeCoultre Maintenance Service Center.