Jaeger LeCoultre watch repair service cleaning the appearance?

Surface cleaning of the watch:

1. When dirt accumulates at the installation of the case and the watch glass, and the connection between the upper frame of the case and the back cover, it can be removed with a stiff brush. The dirt on the upper frame of the case and the threaded buckle on the back cover can be removed with the help of a willow stick, and the rust spots can be scraped along the thread with a fine needle.

2. The inner surface and back cover of the surface glass can be wiped clean with a special cleaning solution with suitable humidity, and if there are fibers, they can be blown off by blowing a dust ball. The luminous watch hand should not be soaked in gasoline, and the luminous powder should be carefully peeled off when clamping or blowing. Other gold-plated, silver-coloured hands are lightly rubbed on the fur before being washed in gasoline to increase the finish of the dies needle.

In addition to the enamel dial, the luminous, silver, gold, glitter and color dials that are currently used more often should not be soaked in gasoline, otherwise the protective film will peel off and the fractional line will fall. If there is dust and fibers on the dial surface, you can blow it with a dust ball and a soft brush.

3. The spots and overtones on the dial should not be rubbed with flannel, let alone hard rubbing, otherwise the disc surface will be coppery and affect the appearance. The grease on the back of the dial can be wiped with a flannel dipped in some gasoline. Clean the dial with the dial side up, avoid mixing with other parts, and then cover it with a dust cover to protect it.

If there is a problem with the watch, call the customer service first**,You can try to call customer service**。。 Then the customer service will tell you how to go after the sale. If you don't know how to get there, you can navigate it. It's good to register after sales and check and repair the technician, and just follow the process.

I do regular maintenance for the watch.

Every 1 to 4 years, corresponding maintenance should be carried out, waterproof elements should be replaced, the function of the movement and the power consumption of the movement should be checked, the movement should be cleaned and the appearance should be maintained. This kind of maintenance will effectively extend the service life of your mechanical watch.

Do not place the watch on the stereo or TV to prevent magnetization.

Do not leave the watch in a closet with mothballs to prevent the oil from deteriorating.

Never touch the watch with corrosive substances, especially acids, which can corrode the case.

It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition. When it is worn on your wrist, it will definitely highlight your charm and temperament!

Jaeger-LeCoultre watch repair service can go to Room 707, 7th Floor, Block 1, Grand Gateway Center, No. 1 Hongqiao Road, Xuhui District, Shanghai. To deal with the above situation, you can use a soft cloth with a small amount of soapy water to clean the metal and waterproof rubber straps, and then use a damp cloth to remove the traces of soapy water, and dry the watch in a low light place to achieve the initial maintenance effect.

At the same time, do not send the watch directly to a place with ultrasonic equipment for cleaning, because the cleaning of ultrasonic is divided into strong and weak different frequencies, once the wrong ultrasonic frequency is used, it is easy to cause the internal parts to loosen.

The watch is wet, the watch is wet, the watch is fast, the watch is slow, the watch stops, the watch does not go, the movement is rusty, the dial is rusty, the case is rusty, the luminous fails, the time is faulty, the watch is magnetized, the back cover is loose, the circuit is faulty, and the return to the factory service.

1. Charges. 1) Cleaning and maintenance.

2) Watch repair.

3) Replace the accessories.

4) Polishing and refurbishment.

5) Personalized customization.

2. It's free. 1) Degaussing.

2) Truncated strap.

3) Authenticity identification.

4) Waterproof testing.

5) Slight polishing.

6) Debugging and calibration.

The watch is wet, the watch is wet, the watch is fast, the watch is slow, the watch stops, the watch does not go, the movement is rusty, the dial is rusty, the case is rusty, the luminous fails, the time is faulty, the watch is magnetized, the back cover is loose, the circuit is faulty, and the return to the factory service.

Shanghai Rolex Repair Center Repair Service: Watch Water, Watch Damp, Watch Fast, Watch Slow, Watch Stop, Watch Not Going, Movement Rust, Dial Rust, Case Rust, Luminous Failure, Time Failure, Watch Magnetization, Loose Back Cover, Circuit Failure, Return to Factory Service.

If there is a problem with the watch, it is better to send it to the watch after-sales center for maintenance as soon as possible. Wanling Hui has an after-sales service, don't go to those small repair shops for maintenance. Not only are they not empowered, but their technology is not professional enough.

The instruments are not very sophisticated. **It's also misreported. It will also cause the watch to be out of warranty.

The dismantling and cleaning fee for an ordinary watch is 770 yuan, and if it is a gold watch, the dismantling and cleaning fee is more than 800 yuan. According to the regulations of the watch industry association, in addition to the dismantling and cleaning fee for watches of tens of thousands of yuan, an inspection fee of 1/1000 will be charged according to the grade of Jaeger-LeCoultre watches.

For those mechanical watches that are not worn for a long time.

It should also be wound regularly so that its machine chip turns. As for quartz watches.

Its battery life is generally 1 to 2 years, the battery should be replaced regularly, and the sealing ring should also be replaced when the battery is replaced.

Jaeger-LeCoultre Table. During maintenance, all Jaeger-LeCoultre parts are disassembled, the movement is wiped with gasoline, and then the other components in the watch are cleaned by professional equipment, and finally oiled and assembled.

In addition to the parts inside the Jaeger-LeCoultre watch, the case introduced by Jaeger-LeCoultre is also polished when the watch is cleaned. Because the watch has very high requirements for technical parameters, cleaning the watch is a very delicate job, and professional cleaning usually takes 5 days to complete.

And after such a complex professional cleaning, old watches can generally be turned into new. Of course, cleaning Jaeger-LeCoultre watches requires a certain amount of money, especially for tens of thousands of dollars, and the maintenance costs are even more expensive. Depending on the quality of the Jaeger-LeCoultre table, the cost of dismantling and cleaning will also vary.

How to care for your Jaeger-LeCoultre watch.

1. Mechanical watch.

The most common conditions for repairs are water ingress and collisions. Unless a mechanical watch is marked as waterproof, it is important to avoid water entering the case, because water can cause mechanical corrosion and is very destructive. Coupled with sweat, dust and other inevitable external factors, it will definitely be tired, so it must be replaced with a new waterproof ring after a year, otherwise it will not have the function of waterproofing.

2. In addition to waterproof, it is also necessary to prevent collisions. If you can afford it, you may wish to replace two or three watches in your daily life: wearing a mechanical watch during static activities and a sports watch when you are engaged in dynamic activities, so that the time can be adapted to local conditions and help extend the service life of the watch.

3. The mechanical watch is driven by mechanical gears and clocksprings, and friction is inevitable when turning, so it is necessary to add oil and lubricate over time to reduce the wear rate of parts. Otherwise, wait until something goes wrong to send it for repair, and the problem is often very serious.

4. If you want to wear it every day, the best way to maintain it is to tighten the spring every two weeks to ensure that its gears run normally and smoothly. Gently rotate the crown until you can feel a slight urgency.