How sawdust cleans tiles, how to cut tiles with a hacksaw blade

Mopping the floor is sometimes laborious and unclean, and it is full of water. There is actually a more effective way.

Tools Raw materials.

Broom, sawdust, water.

Method steps.

1 3 Step by Step Reading.

Pour sawdust (i.e., the foam from the wood, which the carpenter has) on the dirty ground and add a little water. (in order not to dry).

Then use sawdust to sweep the ** dirty. The swept area is dry and clean.

You don't have to wait for the mopped water to dry, and you're good to go.

Floor tiles are commonly used to decontaminate them.

1. Dish soap can be used for daily cleaning of ceramic tiles.

soap and other cleaning;

2. Add a little ammonia and turpentine with soap.

The mixture of liquid, cleaning the tiles can make the tiles more shiny;

3. Polished tiles.

It should be waxed regularly, and the time interval is 2-3 months;

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches, and wipe them with a dry cloth to recover;

5. The crevices between bricks and bricks can be removed from time to time with detergent, and then a layer of waterproofing agent can be brushed on the gaps to prevent the growth of mold;

6. Use sodium ammonia or potassium bicarbonate solution for pollutants such as tea, coffee, beer, ice cream, and oil;

7. Ink, cement and other pollutants use hydrochloric acid and nitric acid.

Equidilute solutions; 8. Use special detergents for paints, coatings and other pollutants;

9. The marks left by the burning of match stems and paper can be dipped in a small amount of diluted oxalic acid with a waste toothbrush.

Solution; 10. All kinds of glue can be used with banana water.

Add a blade to remove, pure banana water is a colorless, transparent and volatile liquid, with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting.

In fact, this is a very simple matter, and after the tiles are installed, use a saw to rub them once, which is clean and does not hurt the tiles.

Do sprinkle on the tiles, and then add some water to wipe the tiles back and forth, very clean and clean.

Do the math how much it will cost you to renovate your home

In our daily life, many people have heard that you can cut tiles with a hacksaw, and you have also seen what a hacksaw looks like, so how to cut tiles with a hacksaw? How does it work? Today, I will talk to you about this problem, and interested friends can follow along to find out.

1. How to cut tiles with a hacksaw blade.

1. Hacksaw is one of all the saws that are relatively hard, so there is almost no hacksaw is something that can not be cut, and the tile is also very easy to cut for the hacksaw.

2. When cutting tiles with a hacksaw, we first put the hacksaw on top of the tile, and then slowly sawed it from top to bottom, and may use a lot of strength when using a hacksaw, because it is not electric after all, we need to help ourselves, in the process of helping, we must grasp the distance between the hand and the hacksaw, and the foot must keep a certain distance from the hacksaw, to prevent the hacksaw from deviating, to prevent unnecessary damage to yourself.

Second, the precautions for sawing tiles with a hacksaw.

1. When we use a hacksaw to slam the tiles, we must maintain our strength. Don't use too much force, too hard is easy to make the edge of the tile uneven, if it is too intimate, it is easy to deviate and hurt yourself, so when using a hacksaw, you must destroy the situation to control your strength.

2. When we saw tiles, we can keep the tiles in a moist state, so that when we saw tiles, we will not splash around us because of some chips on the edges, causing danger to ourselves.

The above is a summary of the relevant content and information on how to cut tiles with a hacksaw, I hope it can help you. If you have any other questions, you can leave a message at the bottom of the platform, and we will solve the problem for you in time. Finally, if you have any questions about home furnishing or home decoration, you can pay more attention to Qeeka Home.

Enter the area and get the decoration for free**].

1.Prepare tools: hacksaw blades, tiles, rulers, pencils, safety gloves, goggles, etc.

2.As needed, use a ruler and pencil to draw lines on the tiles that need to be cut. 3.

Insert the hacksaw blade into the line chain on the tile and hold the hacksaw blade with your hand so that it remains vertical. 4.Pull the hacksaw blade firmly down until the tiles are cut.

5.Repeat the above steps until all the lines that need to be cut are completed. 6.

Stay safe and wear gloves and goggles to prevent debris from flying and injuring people. 7.The edges of the cut tiles may be a little rough and can be trimmed with sandpaper or a tile dresser.

1. Hacksaw is one of all saws that is relatively hard, so there is almost no hacksaw that can not be cut, and the tile is also very easy to cut for the hacksaw.

2. When cutting tiles with a hacksaw, we first put the hacksaw on top of the tile, and then slowly sawed it from top to bottom, and may use a lot of strength when using a hacksaw, because it is not electric after all, we need to help ourselves, in the process of helping, we must grasp the distance between the hand and the hacksaw, and the foot must keep a certain distance from the hacksaw, to prevent the hacksaw from deviating, to prevent unnecessary damage to the self-contained paragraph.

3. When we use a hacksaw to see tiles, we must maintain our strength. Don't use too much force, too hard is easy to make the edge of the tile uneven, if too intimate, it is easy to deviate and hurt yourself, so when using the hacksaw, you must control the strength of the self-lifting.

When we saw the tiles, we can keep the tiles in a moist state, so that when we saw the tiles, we will not splash around us because of some chips on the edges, causing danger to ourselves.

1. Hacksaw is one of all saws that is relatively hard, so there is almost no hacksaw that can not be cut, and the tile is also very easy to cut for the hacksaw.

2. When cutting tiles with a hacksaw, we first put the hacksaw on top of the tile, and then slowly sawed it from top to bottom, and may use a lot of strength when using a hacksaw, because it is not electric after all, we need to help ourselves, in the process of helping, we must grasp the distance between the hand and the hacksaw, and the foot must keep a certain distance from the hacksaw, to prevent the hacksaw from deviating, to prevent unnecessary damage to yourself.

3. When we use a hacksaw to see tiles, we must maintain our strength. Don't use too much force, too hard is easy to make the edge of the Tiles uneven, if too intimate, it is easy to deviate and hurt yourself, so when using a hacksaw, you must control your strength.

When we saw the tiles, we can keep the tiles in a moist state, so that when we saw the tiles, we will not splash around us because of some chips on the edges, causing danger to ourselves.