Kitchen heavy oil cleaner formula exchange?

Updated on home 2024-07-19
12 answers
  1. Anonymous users2024-02-13

    1. Neutral formula: heavy oil stain cleaning agent masterbatch + super nano emulsifier + flavor + pigment + preservative + water + drawing powder.

    2. Alkaline formula: heavy oil cleaning agent masterbatch + super saponification emulsifier + flavor + pigment + preservative + water + drawing powder.

    "Stubborn" grease stains on the stove can be mixed with hot water and detergents. Use some scouring pad to apply some grease stains. After a few minutes, it will become much easier.

    The materials used in the dishwasher are better, so when cleaning, use a soft, damp cloth and gently scrub with a small amount of detergent if necessary.

  2. Anonymous users2024-02-12

    Homemade kitchen heavy oil cleaner formula: oil clean, sodium silicate.

    Production steps: 1. Oil stain net 1--10%.

    2. Sodium silicate 90--99%.

    3. Finally, shake evenly, so that the all-purpose detergent is made.

    Cleaning method: Turn on the range hood and let it run, spray concentrated stain remover into the fan, spray warm water after 5 minutes, the dissolved oil will flow into the oil storage box, and directly remove the oil storage box for cleaning. The panel of the range hood is relatively simple to clean, you can spray the detergent first, and then paste the paper towel to make the detergent decompose the dirt; Remove it after half an hour, then gently wipe it with a sponge and use a paper towel to absorb the detergent, which will absorb most of the oil and is more effective than just spraying the detergent.

  3. Anonymous users2024-02-11

    What is the formulation of heavy oil cleaner?

  4. Anonymous users2024-02-10

    Production method of heavy oil cleaner:

    Ingredients to prepare: baking soda, white wine, white vinegar, lemon, chopsticks, glasses.

    Step 1: Pour 15 grams of baking soda into a glass (soda has a strong decontamination and cleaning effect).

    Step 2: Then pour 10ml of liquor into a glass (liquor is lipophilic, so it can be well integrated with oil; At the same time, the hydrophilicity of liquor makes it dissolve in water with oil).

    Step 3: Then pour 10ml of white vinegar into a glass (white vinegar has the effect of removing grease and sterilization).

    Step 4: Squeeze the juice of the lemon into a glass (lemon contains citric acid, which effectively breaks down the oil).

    Step 5: Use chopsticks to stir the baking soda, white wine, white vinegar and lemon juice in the cup well.

  5. Anonymous users2024-02-09

    Production product formula and production process: you can adjust the ratio according to the cost.

    1) Thickener products:

    1. Formula ratio: heavy oil, heavy pollution and heavy scale emulsifier 3-9% + four-in-one thickener 6% + salt, strong alkali resistant Kaisong preservative, appropriate amount of flavor + water 85-91%.

    2. How to adjust the proportion of salt.

    1) Initial salt ratio: first do a small test of one kilogram of product, the method is: pinch with your fingers (do not use a spoon) a little salt, put a little bit less, put it once and then put it a second time.

    When the consistency is generated, if the consistency cannot be improved by putting salt three times in a row, it means that the salt ratio is enough. The salt used is measured to determine the proportion of salt used in one kilogram of product, and then scaled up to the desired proportion for production.

    2) Determine the proportion of salt: from the proportion of salt used in one kilogram of products to the proportion required for production, there will be a certain measurement error, which needs to be adjusted again, and the adjustment method: the washing solution produced is beaten out by one kilogram, and the proportion of salt is adjusted to the thickest state, so that you can know what the final salt ratio is.

    3) Adjust the salt ratio: replace the salt variety (edible salt, industrial salt, brine, coarse salt), change the weight of water, adjust the formula, adjust the cost, adjust the raw materials, and readjust the salt ratio in one of these situations. Novices do experiments, first do a kilogram of product test, all the raw materials are dissolved and divided into ten parts to adjust the salt, first find the method.

    Precautions: Too much salt will turn into water, and the aqueous solution will turn white.

    3. Production process:

    After adding the four-in-one thickener to water to dissolve, then add other raw materials, stir and dissolve with a blender, and then add salt to thicken.

    2) Liquid products:

    1. Formula ratio: heavy oil, heavy pollution and heavy scale emulsifier 3---15% + four-in-one thickener 2% + strong alkali resistant Kaisong preservative, appropriate amount of flavor + water 85-95%.

    2. Production process:

    Add all the ingredients to the water and stir with a blender to dissolve.

    3) Powder products:

    1. Formula ratio: heavy oil, heavy pollution and heavy scale emulsifier 3-15% + soda ash 85-95%.

    2. Production process: Mix heavy oil, heavy pollution and heavy scale emulsifier and soda ash and stir evenly.

  6. Anonymous users2024-02-08

    The kitchen is too heavy to clean, and it is difficult to clean it, so you can make homemade cleaners at home, and clean them immediately with a light wipe.

  7. Anonymous users2024-02-07

    Use salt water and your baking soda on top.

  8. Anonymous users2024-02-06

    Dear, hello, I am happy to serve you, the answer is as follows: the formula of the crude agent for removing grease stains and cleaning has half a spoon of flour, 1 spoon of laundry detergent, 2 spoons of white vinegar, 3 spoons of white wine, and an appropriate amount of water in Qi Stool State, which can be used to clean oil pots, range hoods, kitchen tiles, etc. 1) Powder formula: 1--10% + sodium silicate 90--99% 2), high water shielding agent formula:

    Tianxia Oil Stain Net 1--10% + Water 90--99% + Preservative + Flavor + Pigment 3), Paste Formula: Tianxia Oil Stain Net 1--10% + Water 84--94% + Four-in-One Thickener 5% + Salt + Preservative + Flavor + Pigment.

  9. Anonymous users2024-02-05

    1. Powder formula: 1 10 sodium silicate 90 99.

    2. Water formula: 1 10 water 90 99 preservatives, flavors, pigments.

    3. Paste formula: 1 10 water 84 94 four-in-one thickener 5 salt preservatives flavor pigments.

  10. Anonymous users2024-02-04

    What is the formulation of heavy oil cleaner?

  11. Anonymous users2024-02-03

    2. Water formula: 1 10 water 90 99 preservatives, flavors, pigments.

    3. Paste formula: 1 10 water 84 94 four-in-one thickener 5 salt preservatives flavor pigments.

  12. Anonymous users2024-02-02

    Let me answer the question of the separation of the scrub hand sanitizer made by some friends.

    First, it's not a bubble problem, it has nothing to do with bubbles, you add a defoamer if there are bubbles.

    Second, it is not a question of stirring, let alone fast or slow stirring.

    The core problem is the raw materials you buy.

Related questions
10 answers2024-07-19

Heavy oil cleaners belong to the 0104 group of the first class of the trademark classification; >>>More

6 answers2024-07-19

1. Powder formula: 1--10% + sodium silicate in the world. >>>More

6 answers2024-07-19

1. Oil cleaner.

Ingredients: 1/2 tablespoon flour, 1 tablespoon laundry detergent. >>>More

9 answers2024-07-19

Hello. 1. It has a good cleaning effect on the carbon deposits on various workpieces. >>>More

10 answers2024-07-19

1.If the dirt is not heavy, you can use "toilet cleaner". >>>More