-
The 3rd floor is too professional, and you may not feel that it is the result you want. Because the sawdust is very soft, the floor will not scratch the floor, and the floor can be wiped very clean, but the dirt that is not easy to clean and the sawdust cannot be wiped off, and the wood floor cleaning agent should be used to clean it.
I guess you're probably talking about just putting floor tiles, right? If it was I suggesting that you better rub it with river sand, why? Because of the gap between the freshly pasted floor tiles and the floor tiles, sawdust is easy to enter.
If there is water and the floor is a little damp after entering, it is easy to get moldy. If you rub it with sand, the sand will fill the gaps. There are several benefits.
1. It can play a certain role in waterproof and moisture-proof. 2. There will be no gaps between the floor tiles in the future. "Because sawdust will fall out later, it's so hard to clean up".
-
2 points will be awarded for the first time, and reward points and an additional 20 points will be awarded for the answer.
Regardless of the material of the floor, it is necessary to use a vacuum cleaner or broom to clean the debris, dust, and hair on the surface of the floor. Then according to the material of the floor, choose the appropriate floor cleaner, pour an appropriate amount of floor cleaner into the bucket to dilute according to the degree of dirt before use, and then use a mop to mop the floor from the room to the door. If it is a corner or a crack in the floor, you can use a brush to brush directly with the floor cleaner.
If you use a floor polish with a water wax formulation, you can make the grinding stone or marble floor shine after cleaning, and just let it air dry after use.
Wooden floors. Do not wipe the wooden floor directly with a wet mop, and use a special cleaner for wooden flooring to clean it, so that the floor can maintain the original warm texture and natural color, and can prevent the wood from drying and cracking. In order to avoid excessive moisture penetrating into the inner layer of the wooden floor, causing mold, rot or deformation, the mop should be wrung out as much as possible when using.
If you want to avoid long-term trampling and wear of the floor, always keep it shiny and bright, after the floor is cleaned, you can apply another layer of wood floor wax maintenance agent. However, it should be noted that it is necessary to wait for the floor to dry completely before applying wax, so as not to completely adhere to the wooden floor, but to make the floor appear little by little white spots. And it is best to use a flat sponge mop, so as not to leave the brocade of the general mop on the floor.
-
In the past, sawdust was used to wipe stone or concrete floors, but this method mainly used sawdust to absorb dust from the ground.
Nowadays, the flooring in the home does not need these at all, and these things are damaging to the floor.
The best way to wipe the floor is to use a dry cloth to wipe the surface dirt clean, and then use a damp cloth to wipe the floor.
No matter what the floor is, it is absorbent, so the rag should not be too wet.
-
I can remove floor wax with saw foam.
Use laundry detergent.
Sawdust or flour for cleaning. The most common method is to use laundry detergent, melt the laundry detergent in water, and then use this water to clean the mop at home, and wipe the tiles repeatedly with the mop, and the wax on the tiles will be removed.
Cleaning with sawdust, pouring sawdust on the tiles, and then wiping the tiles repeatedly with a mop can effectively remove the wax from the tiles. Or use flour, sprinkle the flour evenly on the tile, use a dry rag, and rub vigorously on the tile to effectively remove the wax.
Floor wax cleaning tips
1.You can add a little ammonia to the detergent.
Then wipe it with a rag dipped in the prepared detergent, soak the floor wax for a period of time, and then wipe it off with water.
2.Dry cleaning liquid for clothes can also remove floor wax, you can use a rag to dip some dry cleaning liquid on the floor wax, and then gently brush it off with a brush.
3.You can dissolve the soap in water to make it foam, then soak the rag in it, wipe it with a damp cloth on the floor wax, rinse it with water, and then dry it with a dry cloth.
Soldering things doesn't have to be soldered with sulfuric acid to be able to solder objects, but in other words, some metals can only be soldered with matching flux, and some materials don't require flux, such as copper. >>>More
That's right. OriginalAntifreezeThe quality is more reliable, and it is recommended that you go to the 4S store to replace the original antifreeze. If you buy other brands, you need to pay attention to the products of regular manufacturers. >>>More
Like someone, if she likes you too, of course it's good to be together! If she doesn't like you, then you can try to pursue her, or if you are a great person, then you can let her go and bless her! But I have one word of advice: >>>More
1. At present, the water heaters used in general households are mainly solar, gas and electric water heaters. The gas generally adopts the mode of instant heating, and the temperature adjustment has two designs: constant temperature and manual adjustment. There are two heating modes of electric water heaters, one is instant heating water, but the power consumption is very large, about 18kw, and the other is water storage type, which stores the heated water in a tank for later use; Its temperature adjustment is also two designs, instant heating, some adopt constant temperature design, and water storage heating, is basically manual adjustment design. >>>More
The imbalance between men and women in China is just patient. >>>More