How to wash off the dust on the rubber sheet of table tennis?

Wipe the glue with a clean cloth dampened with water. Each time you finish the ball, you should use a professional sponge to wipe it down. Always avoid scratching the rubber surface. After using the racket, wipe the rubber surface with a special sponge.

Once the clean rubber surface of the racket surface becomes dirty, the viscosity is greatly reduced. After the leather surface is dry, the glue is collected. The racket should be placed in a ventilated and dry place, away from heat sources, away from sunlight, and not slapping heavy objects.

Keep the rubber clean when using the reverse glue. Do not wipe the rubber with oily hands. The rubber can be washed with water and coated with plastic film. If there is dirt that is difficult to remove with water, it can be washed, dried, and reused with a detergent such as soap.

This is very simple, there are generally special detergents, a bottle is about two or three hundred milliliters, it can be used for about a year, and it is not expensive, just a few dollars. If you have a sponge and a protective film, it will be about ten yuan. The general situation is that the rubber is not used to spray it with detergent, and then wipe it off with a sponge, and then paste it with a protective film after the moisture on the surface of the racket is dried.

Because the detergent can remove the dust, and the protective film can protect the rubber against oxidation, it is generally used together. It is not recommended to wash with water, because washing can not remove the rubber dust well, nor can it protect the rubber skin!!

It will be better to clean it with a professional detergent, and it is better not to clean it with water, which will reduce the service life of the rubber.

If there is dust on the table tennis racket you just bought, use a special adhesive cleaner to clean it up, and use a sponge to gently wipe it. The table tennis racket consists of three parts: a base plate, a rubber and a sponge. The proper combination of the three determines the quality of a racket.

Other knowledge of table tennis rackets.

There are two commonly used types of table tennis rackets, straight and horizontal. The advantage of the straight board is that the attack speed of the near platform is fast, and the forehand and backhand change quickly, while the disadvantage is that the backhand is a weakness, because the backhand cannot be attacked, and the defense is the mainstay.

In recent years, China has invented the technology of straight board horizontal play, that is, to hit the ball with the back of the straight board, which is often unexpected, and can pull out the arc ball. Straight boards are easy for us amateurs to get started, but playing straight boards requires a flexible pace.

The way to pay attention to a little is to use a special glue surface cleaner, which is sold on the Internet, and the random approach is to use a sponge (the sponge of the bowl can not drop the slag) to dip it in water, wipe it from the direction of the handle to the top of the racket surface, the amount of water should not be too much, and the force should not be too heavy, but it must be wiped clean, pay attention to try not to let the wood part stick to the water, of course, in general, even if it is stained with a little water, it does not matter much, and you must not directly put the racket in the water to wash. After confirming that it is clean, after the water traces on the surface of the racket surface are dry, paste a protective film to reduce the contact between the rubber surface and the air, which can increase the service life of the rubber cover, and pay attention to washing hands before playing, keeping the surface of the table and table tennis ball clean, which can reduce the probability of sticking to the dust of the racket.

<> correct thing to do is:

1. After playing, clean the surface of the rubber cover with a soft puff that washes rubber wool or does not use slag;

2. You can also use pure water to wipe the rubber pad after wetting, and it will not stick after cleaning it a few times, and the rubber surface will be clean.

The maintenance of the rubber is related to the weather, the temperature is low in winter, and the elasticity of the rubber is not good. In summer, when the temperature is high, the elasticity of the rubber is the best, and the ball can fly very far. In addition, when there is a lot of humidity, the rubber is stained with moisture, just like a layer of fog on the mirror, and the ball is easy to slip at this time.

Rainy season. Dirt from the rubber should be removed to avoid affecting the friction of the racket.

Summary. There are several ways to remove old glue from the rubber of a table tennis racket:

Rub directly into the hands. The advantage of this method is that because of the use of fingers, so the feedback is the clearest, so the grasp of the residual glue is the most direct, for some very delicate, easy to rub the sponge, sometimes you have to use your fingers to assist so many times, especially at the beginning of rubbing, it is better to rub out a small opening with your fingers.

With a toothbrush. But this method has a scope of application, because the toothbrush itself is also a soft bristle, only suitable for the kind of racket that is glued before the glue dries, in this case, after tearing the rubber apart, the glue layer is still soft, so the bristles of the toothbrush can bring up the glue layer very well, but in fact, it is impossible to avoid small pits. But overall, using a toothbrush is the most convenient and efficient way to do it without hurting your hands.

With table tennis. Hold the ping pong ball with your hand, grasp the strength by yourself, and after rubbing a small hole in the glue layer, you can start to rub it along the way. However, it should be noted that table tennis balls can be much harder than toothbrushes, so you can't use too much force, otherwise you will accidentally rub the sponge out of a big hole.

If you encounter a glue that is difficult to remove, you can use inorganic glue or bulking oil to apply it again, especially the expansion oil, which can react with the original glue layer and soften the glue layer, so as to make the process of removing the glue easier.

How to remove the rubber on the table tennis racket, and the bottom plate can be glued again?

Hello, I'm helping you sort out the answers, it takes a while to type, please forgive me.

There are several ways to remove the old glue from the rubber of a table tennis racket: rub it directly with your hands. The advantage of this method is that because of the use of fingers, so the feedback is the clearest, so the grasp of the residual glue force is the most direct, for some very delicate, easy to rub the sponge, sometimes you have to use your fingers to assist so many times, especially at the beginning of rubbing, it is better to rub out a small opening with your fingers.

With a toothbrush. But this method has a scope of application, because the toothbrush itself is also a soft bristles, only suitable for the kind of racket that is glued before the glue dries, in this case, after tearing the rubber apart, the glue layer is still soft, so the toothbrush's stupid bristles can bring up the glue layer well, but in fact, it can't avoid small pits. But overall, using a toothbrush is the most convenient and efficient way to do it without hurting your hands.

With table tennis. Hold the table tennis ball with your hand, grasp the strength by yourself, and after rubbing a small hole in the glue layer, you can start to rub it along the way. However, it should be noted that table tennis balls can be much harder than toothbrushes, so you can't use too much force, otherwise you will accidentally rub the sponge out of a big hole.

If you encounter a glue that is difficult to remove, you can use inorganic glue or bulking oil to apply it again, especially the expansion oil, which can react with the original glue layer and soften the glue layer, so as to make the process of removing the glue easier.

After the bottom plate is glued, there is a feeling of residual glue.

It can be glued again.