What can I use to remove floor tile stains?

To clean up the dirt on ceramic tiles, it is necessary to understand the types of tiles and the nature of contaminants.

1. Pollution cleaning method of glazed bricks:

For glazed bricks, the glaze layer of the brick surface is a very dense substance, and colored liquids or dirty things will not penetrate into the brick.

If it is a tile with a strong sense of concave and convex, if there is a lot of dust squeezed in the uneven gaps, use a brush to brush and rinse with clean water to remove the dirt on the brick surface.

2. Vitrified bricks.

How to clean up the dirt:

For vitrified tiles, the following corresponding cleaning agents can be used to clean up the contaminants commonly used in the household:

1) Pollution type: daily cleaning.

Cleaning method: You can use a cloth, and then use dish soap and soapy water to clean it.

2) Pollution type: tea, ice cream, grease, beer.

Cleaning method: Soda ash can be used.

The solution can be washed.

3) Pollution type: sediment, rust, mortar.

Cleaning method: Use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes and then wipe it, taking care to protect your hands. Amway.

There's a special tile cleaner that works pretty well too! If it is lime, putty powder.

The white latex drips off the brick surface and is carefully scraped off with a razor blade.

4) Pollution type: paint, drawing pen.

Cleaning method: Turpentine can be used.

Acetone wipe, toothpaste used at home also has a good stain removal effect.

5) Pollution type: soy sauce, vinegar, carbon powder.

Cleaning method: Use toilet cleaner.

The effect is relatively good.

6) Contamination Type: Ink.

Cleaning method: You can use Amway tile cleaner or toothpaste.

Suggestion: If the surface of the vitrified tile is contaminated, it is recommended to use the corresponding cleaning agent to clean it immediately! `

Note: Commonly used cleaners in the home:

Toilet Cleaner, Toilet Cleaner, Toothpaste, Amway Tori Tile Cleaner, Qianyixi Ceramic Brush and Qianyixi Ceramic Stain Remover (good stain removal effect for stubborn stains).

Spray the dish soap on a paper towel.

If there are oil stains on the floor tiles, and they are oil stains that have solidified for a long time and are difficult to treat, it is useless to use only detergent. At this time, we need to wipe it with orange peel first, then cover the paper towel with the oil stains, and then spray the detergent on the paper towel, wait for a while, the oil stains will adhere to the paper towel, tear off the paper towel, and then scrub it with cold water, and the floor tiles will become clean as new.

No matter how difficult it is to clean up the crevices of the floor, just use it, and the stains can be removed with a light wipe.

Cleanup Tips:

1. Daily cleaning of ceramic tiles can be carried out with dish soap, soap, etc.

2. Clean the tiles with a mixture of soap and a little ammonia and turpentine, which can make the tiles more shiny.

3. The polished tile should be waxed regularly, and the time interval should be 2-3 months.

4. If there are scratches on the brick surface, you can apply toothpaste to the scratches and wipe them with a dry cloth to repair them.

5. The crevices of brick B can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold.

6. Sodium hydroxide or potassium bicarbonate solution can be used to remove pollutants such as tea, coffee, beer, ice cream, grease and so on.

7. Hydrochloric acid, nitric acid and other diluted solutions can be used to remove ink, cement and other pollutants.

8. Special cleaners can be used to remove paints, coatings and other pollutants.

9. To remove rust, it can be washed with 2% oxalic acid solution, and then wiped with water. If it is rust stains, you can use 10% oxalic acid, citric acid and water mixture to soak the rust area, and then wipe it with concentrated salt water.

Living room tile construction strategy.

1. Determine the style and consider the individual needs.

When purchasing floor tiles, we must first consider our overall style, determine the approximate color tone of the tiles, so as to coordinate with the overall style of the living room, and pay attention to consider some of their own individual needs.

2. How to determine the specifications of floor tiles.

When considering the specifications of floor tiles, we should pay attention to the following two aspects: one is the size of the living room, do not blindly pursue large-size floor tiles.

A1One is the use of toothpaste; First, squeeze some toothpaste on the stained area of the floor tile, then scrub it with an unused toothbrush or other brush, and then wipe it with a dry rag. 2.

the second is to use white vinegar and laundry detergent; First pour an appropriate amount of white vinegar into the water, then pour in a little laundry detergent, and stir well, then sprinkle the stirred water on the tiles, sprinkle more where there are stains, and finally use a mop to drag back and forth on the floor a few times.

I've used dish soap before and it's useless.

There is also a question about water responsibility.

Then you buy a white cat, bleach, and a brush mixed with water.