Does it have an impact on the decoration and tiling in the summer?

Updated on home 2024-07-14
4 answers
  1. Anonymous users2024-02-12

    Actually, it didn't have much of an impact, because it was better to lay tiles in the summer, and it was better to paste them.

  2. Anonymous users2024-02-11

    Good on a hot day.

    The laying temperature of floor tiles should preferably be higher than 10. Before laying, the floor tiles must be placed face down on the construction site for more than 24 hours so that the temperature of the floor tiles is the same as the room temperature. The room temperature should be kept as constant as possible during the laying process.

    In addition to squares, floor tiles can also be cut into triangles, rectangles and other shapes at will.

    Before laying, a cross-shaped baseline is drawn on the ground. The method is: measure the size of the ground, draw a longitudinal or transverse line on the ground, and then make a perpendicular line through the ** of this line.

    If the floor tiles are paved diagonally, the reticle should be drawn at an angle of 45° to the original baseline. For best results, the floor tiles at the edges should be at least half of the floor tiles, if less than half, the reticle can be shifted by 1 2 floor tile widths. The floor tiles should be laid from the center of the ground to the periphery.

    First of all, ceramic tiles are made by physical pressing and chemical firing, which is a standardized industrial product. The size specification can be processed and cut into the specifications you want according to the actual decoration requirements.

    Secondly, the hardness of the tile is 4-7, the car will not break when it is slowly pressed over the brick surface, and the surface is protected by glaze, and the product is super wear-resistant. In frequently used places such as the family living room, tiles will not be worn out.

    Because the glaze layer on the surface of the tile is dense and smooth, the water absorption rate is less, the surface of the tile is a glaze room made of high-temperature firing, the stain can not penetrate at all, and after polishing, the surface is smooth, so the tile can be washed and cleaned with water, and it is very convenient to clean.

    In addition, because ceramic tiles are specialized in production, raw materials and processes are controllable, and the products produced are flawless and color-free. The product pattern has its own characteristics, the appearance is fashionable and beautiful, comfortable and durable.

    Also, the service life of ceramic tiles is very long, in general its service life can reach 10-20 years. Moreover, the thermal insulation performance of the tiles is also good, and the construction is also very simple.

  3. Anonymous users2024-02-10

    Not much impact. The high temperature in summer has little impact on tiling, as long as you pay attention to the floor tiles and wall tiles before paving, you can not let the bottom layer of the veneer be too dry, and you should splash water before general treatment, so that it can absorb for about half an hour, and then use cement mortar to ensure that the bond is firm. Since the material is drier than usual, it is necessary to extend the soaking time of the soaking treatment for materials that need to be soaked in water, such as floor tiles and tiles, so that they are fully close to saturation.

    It may mostly refer to the poor decoration in summer, and it refers to the rainy season, which is not good for painting and wall painting.

    Floor tile paving.

  4. Anonymous users2024-02-09

    In summer, the temperature is high and the humidity is high, which is good for paving tiles and is strong.

Related questions
Is it necessary to do modeling for home decoration and tile paving?
14 answers2024-07-14

A few days ago, I went to the community and found that my neighbor's house was being renovated, and I wanted to go in and have a look, and found that my neighbor's house was all tiled. I thought that my neighbor had really spent a lot of money to renovate the house, but after talking to the neighbor, I realized that it was a project given by the decoration company. >>>More

Home decoration Chinese style, what aspects need to be paid attention to in tile paving?
17 answers2024-07-14

What is the hottest home style in recent years? If this is a multiple-choice question, the new Chinese style is definitely one of the correct answers. The delicate and elegant Chinese style, appropriately integrated with the elements of simple personality, has evolved into a new Chinese style of "blue out of blue and better than blue", which is loved in home design. >>>More

If the decoration can be repeated, which "5 don'ts" must be adhered to when tiling and plaving?
20 answers2024-07-14

Don't tile the whole room, don't put the tiles together with the floor, don't use golden seams, don't use tiles of small colors, don't use tiles that are too absorbent.

Does it affect the water ingress of the car film, and whose responsibility is the water ingress of t
19 answers2024-07-14

There may be some effects, but the impact is not big, because it is impossible for the water to set the whole thing open, and usually, it does not get wet, so it doesn't matter a little bit.

Do you need to soak in water for the middle plate paving of horn tip tiles? How long to soak in wate
23 answers2024-07-14

If you want to lay the bricks, it will take two or three hours to soak them, so that the effect will be better, and the paving will be more hygroscopic.