How is the fleshy blowing snow pine brocade always lying on his stomach

The reasons why the pine brocade of the blowing snow is soft are as follows:

Reason 1: lack of water.

If the leaves of the blowing snow pine brocade are wilted, the leaves may not have received water for a period of time, so it is necessary to consider whether the blowing snow pine brocade has not been watered for a period of time. Long-term water shortage or excessive water control will lead to the lack of water and self-consumption of leaves. The water in the leaves of succulents is used to consume itself in times of drought and lack of water to sustain growth.

When the leaves consume water, they will wilt.

Solution: The leaves of the pine brocade caused by lack of water are wilted and need to be watered as soon as possible. Usually the leaves will change 48 hours after watering, and the leaves will slowly become full after the roots absorb the water.

Reason 2: Exposure to the sun.

Although the snow pine brocade likes a sunny environment, when the external ultraviolet rays are strong, the direct sunlight will cause the leaves to wilt, because the strong ultraviolet rays destroy the cell tissue inside the leaves. This usually happens in the summer when it is grown in the open air.

Solution: The sunburn of the leaves caused by exposure to the sun is actually irreversible. Because the internal cell is destroyed, it can only be slowly maintained, waiting for it to consume itself.

If such a problem occurs, we also need to consider changing the maintenance environment, moving the blowing snow pine brocade to a relatively mild place or proper shade to avoid more serious sunburn.

Cause 3: Frostbite.

Winter maintenance of the snow blowing pine brocade needs to be kept in an environment with a temperature of 5 degrees or more, and the snow blowing pine brocade below 5 degrees Celsius will be dormant and stop growing, and if it is lower than 0 degrees, there is a risk of frostbite. Therefore, if there is a situation of low temperature maintenance, you can consider whether it is frostbite. Frostbitten succulent leaves usually become soft and wilted, and may even rot in the later stage.

Solution: Frostbite of the leaves of the blowing snow pine brocade caused by low temperature maintenance, the first thing to do in this case is to move them to a warmer environment to avoid frostbite more severe. The second is to observe whether there is water in the later stage of the leaves, if the leaves are water, then the water leaves need to be pulled out, if there is no water normal maintenance.

Frostbitten leaves are the same as sunburn because the internal cellular tissue is destroyed and cannot be recovered.

Reason 4: There is a problem with the root system.

The growth of plants depends on the root system to absorb water and nutrients, and once the root system has problems and cannot absorb water and nutrients normally, then the leaves will slowly consume water until they dry up. The root system problem is more complicated, it can be black rot, or the root system can be dry and aging or the root system is not vigorous enough. These reasons will cause the slow growth of the blowing snow pine brocade and excessive consumption.

Solution: When there is a problem with the root system of the blowing snow pine, we need to dig it out, check the root system, and prune off the problematic root system. After drying the roots, replant and wait for growth.

The reason why the fleshy blowing snow pine brocade is always lying on his stomach may be due to lack of water. Long-term water shortage or excessive water control will lead to self-consumption of leaves without water, and the leaves will wilt after consuming water. The solution is to water as soon as possible, usually 48 hours after watering, the leaves will change, and the leaves will slowly become full after the roots absorb the water.

1. Breeding environment: Loose soil should be used for cultivating snow blowing pine brocade, and 5 hours of light should be provided for the plants every day. 2. Water and fertilizer management

Water every 7 days in spring and autumn, and fertilizer twice a month during the peak growing season. 3. Precautions: Cut off the succulent branches in the peak growth season, and cut off the dry branches in early spring.

1. Breeding environment

When cultivating the pine brocade of blowing snow, it is necessary to use vermiculite and humus to prepare the base soil, and put the plants in a sunny environment, providing them with 5 hours of scattered light every day, and the pine brocade of blowing snow is not cold-resistant, and the breeding temperature should be kept between 10-18 degrees to avoid frostbite of the plants.

2. Water and fertilizer management

The pine brocade of blowing snow has little demand for water, it can be watered once a week in spring and autumn, watered once a month in summer and winter, and the plant likes fertilizer, nitrogen fertilizer and phosphorus fertilizer can be applied twice a month in the peak growth season, and phosphorus and potassium fertilizer should be added to the pine brocade of blowing snow before flowering.

3. Precautions

In the process of cultivating the pine brocade of blowing snow, it is necessary to cut off the long branches during the period of vigorous growth, and cut off the leaves close to the base to promote the growth of the branches.

Blowing snow pine brocade breeding method:

1. Soil. The root system of the blowing snow pine nishiki is fleshy, and it prefers soft, breathable and well-drained soil. When breeding, it is recommended to mix coarse sand and humus soil to prepare soil. When potting, add a layer of broken tiles to the bottom of the pot to improve the drainage capacity.

2. Temperature. It prefers a warm environment, with temperatures between 15 and 28 degrees Celsius optimally and is most conducive to growth. The high temperature resistance and cold resistance are not high, the temperature in summer should not be higher than 35 degrees, and the temperature in winter should not be lower than 5 degrees.

3. Illumination. It likes to grow in a sunny environment, and is suitable for full sunlight maintenance, and the more light it is, the better the overall condition. If it is placed in the shade for a long time and lacks light, the plant is easy to grow, the ornamental value will be greatly reduced, and it is also easy to be infected with pests and diseases.

Fourth, watering. Blowing snow pine brocade is a succulent plant that is inherently drought tolerant, does not require much water, and contains a lot of water in its leaves. Spring and autumn belong to the growing season, at this time watering should follow the principle of seeing dry and wet, pay attention to not dry and not watering, watering is watered thoroughly, keep the soil slightly moist, can not store water.

Precautions for blowing snow pine brocade breeding:

During the growth period of the pine brocade of blowing snow, it is necessary to prune it regularly, cut off the long branches, and cut off the dry and damaged branches and leaves. It is also necessary to pay attention to the temperature, move into a warm room in winter, and keep the temperature not lower than 5.

During the maintenance period, it is necessary to pay attention to the timely repotting treatment, usually the maintenance of one or two years to change the pot to it once, the soil is poured out, replaced with new nutrient soil, otherwise the soil is easy to harden for a long time, which will hinder the growth.

Fertile soil: mix soil with coarse sand, humus soil, garden soil, and bone meal. Ambient ventilation:

Keep the pine brocade of the blowing snow in a well-ventilated location such as a window or balcony. Watering water and fertilizer: Apply fertilizer 1-2 times a month, and water thoroughly when watering.

Precautions: In summer, cover the surface of the plant with a shade cloth with 40% light transmittance.

1. The soil is fertile

In order to promote the vigorous growth of the pine brocade of blowing snow and achieve bursting, it is necessary to ensure suitable soil conditions, it is best to choose loose and fertile, well-drained and humus-rich soil, which can be mixed with coarse sand, humus, garden soil and bone meal, and when planting in a pot, add a few tiles at the bottom of the pot to increase drainage.

2. Ventilation of the environment

If the air is not circulated, it will cause the plant to appear yellow leaves, wilting and other phenomena, so it should be kept in a well-ventilated position such as a window and balcony, which is conducive to the bright color of the leaves and flowers.

3. Watering water and fertilizer

Spring and autumn belong to the growing season of blowing snow pine brocade, at this time watering should follow the principle of dry watering, in summer and winter when the plant grows slowly, to reduce watering, keep the soil dry, and in the period of vigorous growth, it is recommended to apply fertilizer 1-2 times a month.

4. Precautions

When the pine brocade of blowing snow is cultivated in summer, it can be covered with a shade cloth with 40% light transmittance on the surface of the plant, or covered with a double layer of black mulch film on the soil surface, which plays the role of absorbing heat and reflecting light, and cutting off all the wilted, drooping, weak, diseased and insect branches in early spring.

1. Soil preparation: Blowing snow pine brocade can be mixed with humus soil, coarse river sand, peat soil, and maifan stone to prepare cultivation soil. 2. Sufficient light:

During summer maintenance, it is necessary to ensure that the sunshine duration is more than 3 hours. 3. Control the amount of water: when the temperature rises to more than 35 degrees, reduce watering.

4. Precautions: The pine brocade of blowing snow should be cured for 1 to 2 years, and the potting soil should be changed.

1. Soil preparation

Blowing snow pine brocade is a succulent plant, suitable for growing in loose and breathable, well-drained, nutrient-rich sandy loam soil, can be used humus, coarse river sand, peat, maifan stone, according to 2:3:1:

The ratio of 1 is mixed with cultivation soil, and it should be exposed to the sun for sterilization before planting.

2. Sufficient light:

The main growing season of the pine brocade is spring and autumn, but there is no dormant period in the summer, so it is necessary to pay attention to ensure that the sun is sufficient during the summer maintenance to avoid the lack of light that causes the plant to grow seriously, so when the summer temperature is higher than 35 degrees, it should be placed in the sunny place in the morning and evening to ensure that the sunshine lasts for more than 3 hours.

3. Control the amount of water

There is no obvious dormant period in the summer of the pine brocade of blowing snow, the temperature rises to more than 35 degrees and then reduce the watering, the rest of the time can be maintained normally, when the bottom leaves are soft and wilted, it is necessary to water thoroughly, and the ambient temperature is above 30 degrees to avoid exposure to the sun, and it needs to be moved to a semi-shaded environment for a day of maintenance and then moved to a sunny place.

4. Precautions

During the maintenance of the pine brocade of blowing snow, it is necessary to change the pot in time, usually 1 to 2 years to change the potting soil, pour out the old soil, replace the new nutrient soil, pay attention not to damage the root system when depotting, clean up the floating soil at the root, cut off the dry root system, gently compact the soil after replanting, and water the root water.