The wallcovering is moldy, how to deal with the wallcovering? What are the maintenance methods for w

It can be changed on the wallcovering. It can be done with a brush, it can be wiped with a clean rag, it can be wiped with an alcohol sponge, it can be replaced completely, and it can also be washed frequently with a damp rag.

After the use of wall cloth at home for a long time, it is easy to appear the phenomenon of hair, which affects the decorative effect of the interior, so how to deal with the wallcovering? Let's learn together.

First, how to deal with the wall cloth clean.

If the hair area is small and easy to clean, you can use a toothbrush to scrub the hair area of the wall cloth first, and then wipe it clean with a rag dipped in some alcohol. If the area is large and severe, you should first spray the determinant on the location of the decontamination and wait for a period of time for the plaque to disappear, and then spray some detergent to prevent it. If it is very severe, the wall covering should be re-applied.

2. How to clean and maintain the wallcovering correctly after it is pasted.

1. Doors and windows should be opened during the day to maintain ventilation, and doors and windows should be closed tightly at night to avoid moisture entering. The wallcovering just attached to the wall must not be blown by the wind, otherwise the adhesive applied to the back of the wallcovering will reduce the bonding effect, resulting in a reduced service life of the wallcovering.

2. When cleaning and sanitation indoors, if you find that the edge of the wall cloth is warped, don't panic too much, because this is generally a kind of thermal expansion and contraction caused by changes in temperature and humidity.

3. If the user's home is paved with wall cloth, the window should be often opened for ventilation to ensure that the room has good ventilation, if there is no good ventilation in the room, then the indoor wall cloth is prone to hair, dampness and other phenomena, and will also breed bacteria, which will affect human health, and at the same time lead to poor indoor decoration effect.

4. In daily life, we must pay attention to the cleaning and maintenance of the wall cloth, if the wall cloth is not cleaned and maintained for a long time, the decorative effect and service life of the wall cloth will decline. Under normal circumstances, the dust on the surface of the wallcovering should be cleaned with a feather duster every day, so as to avoid excessive dust on the surface of the wallcovering, which will increase the difficulty of cleaning and maintenance in the later stage.

You can use a toothbrush to clean it and wipe it with some alcohol, so that it can avoid mold growth; Do not work on the wet season and damp wall, the wall ready to be pasted with wallpaper must be smooth and dry, free of dirt and dust, do not collide with hard objects, rub the wallpaper, and maintain it every six months to prolong the service life.

You can use a cleaner to clean the wallcloth before wiping it with a rag. Clean regularly, clean regularly, clean regularly with a rag, wipe regularly, and change the wall cloth regularly.

1. If there are not many mold spots on the wall, they are only distributed in some local places. Prepare alcohol, add rice water, apply evenly, and then wipe the mold on the wall cloth directly with a rag or brush after wetting it. Because the ingredients in the rice washing water can play a role in mildew, and alcohol can also remove mildew, pay attention to wiping gently, so as not to damage the structure of the wallpaper.

2. If there are more mildew spots on the wallcloth, buy a special mold remover, the area is relatively large, first we need to remove the dust on the wallcovering, and then spray this mold remover on the wall, wipe it with a rag, and it can also be removed. The ingredients in the mold remover can dissolve the mold and mildew, and finally wipe it clean to have an effect.

3. If there is more moldy area on the wall, it is also more serious. We can choose to tear off the wallpaper and re-paste the wallpaper, and we must take measures to prevent mildew in the later stage, and often open the windows for ventilation when the economy is tight.

It may be contaminated with water, or there are cracks and watermarks behind the walls, so the mold caused by it must be cleaned up. After the waterproofing is done, this piece of wall covering can be replaced with a new one. It is necessary to spray the mold removal reagent in the moldy area, and only then will it be effective.

1. Directly use a toothbrush to remove the mold on the wall cloth, and then wipe it with alcohol and a soft rag. Doing so will not only clean the wallcovering from mold, but it will also keep the wallcovering dry and avoid mold growth. This method is suitable for those with a relatively small mold area and the mold is not particularly stubborn.

2. If the mold on the wall cloth is more serious, it is difficult to deal with it with the above methods. In this case, a special cleaning method can be used. The principle of this method is to use biochemical reactions to achieve this.

You can use a type called a mold remover to treat mold on wallcoverings. Spray it on the moldy part of the wallcovering, let the mold undergo a chemical and biological reaction, and wait for the mold on the wallcovering to decompose naturally, you can achieve the effect of removing the mold. When using this method, you need to take self-protection measures, such as wearing gloves and masks when using them, to prevent the mold remover from causing bad effects on the body.

In order to avoid mold on the wallcloth again, after removing it, spray some on the wallcovering, which has a certain preventive effect.

3. If the above methods still cannot solve the problem of moldy wallcovering, it is recommended to discard the moldy wallcloth and purchase a new wallcovering, preferably moisture-proof, because most of the moldy wallcovering is caused by the long-term dampness and lack of sunlight.

In the face of this situation, many owners do not know how to deal with moldy wall coverings, in fact, in daily life, we only need to pay attention to frequent cleaning and maintenance, which can maximize the service life of the wallcovering. NextHome Improvement NetworkandCauses of mold on the wallcovering

Causes of mold on the wallcovering:

1.Climate Impacts:The weather in the coastal area is abnormally humid, the air humidity is high, and the moisture of the wall is high, so that the anti-mildew molecules in the adhesive product itself continue to volatilize and destroy, resulting in mold of the wall cloth.

At the beginning of the mold situation, do not use a wet towel to scrub, the mold will move with the wiping traces, plus the growth of mold is to water, if you use a wet towel will make the surface of the wall cloth mildew more and more serious.

How to deal with it:Use a dry towel to "stain" off the mold spots. Then spray disinfectant on the wall cloth at the foot of the wall to observe whether the wall cloth changes color for two days.

If it does not change color, spray the whole wall to kill the residual mold to avoid mold growth and make the wall mildew.

2.High moisture on the ground:The floor of the newly built houses is paved with a thick layer of cement sand, and its water content is very high, and it is impossible to volatilize in a short time.

If the wall covering is not completely dry, the moisture on the floor will continue to evaporate upward, causing mold. Before choosing the wall cloth, check the closure of the wall, many new houses due to the construction is not in place, resulting in the wall rotten and closed body water seepage, which makes the wall fall off and moldy, which is undoubtedly a decoration disaster, so we must ensure the quality of the wall before the wall cloth is put on the wall.

Solution:There is currently no way to scrub the mold away, because the mold has seeped into the wall covering. When it is time to re-paste it, after the wallcovering is torn off, if there is residual mold on the wall, use sandpaper to polish it to remove the mold.

After grinding off, use mold water to sterilize the wall; Or use high-temperature water vapor to sterilize. After the wall is completely dry, the base film is painted, and the wall cloth can be pasted only after the base film is completely dry.

If it's all moldy, clean it up with a wet towel or with alcohol.

If a small area is completely moldy, you can leave it alone, but if it's a large area, then you have to remove it and replace it with a new wall covering.