-
After doing waterproofing, pay attention to the floor tiles.
There should be no debris mixed in the mortar to prevent all kinds of nails such as woodworking wires and threads from being mixed into the mortar, which is easy to puncture the waterproof layer and rust and rebound, and the ceramic tile surface layer is best to use no white cement.
of adhesives. Finally, it's best to make a floor drain.
Experiments, especially the floor drain in the shower room This is very clear to the construction team and the owner, I hope it will be helpful to everyone If there is a floor drain, it must be repaired first. If cracks appear in the floor tiles, they can be applied with silicone or water repellent, and applied with water with your fingers. However, this method is not permanent and needs to be dealt with regularly.
If the drain breaks, it needs to be replaced, which can be more of a hassle. If you are not familiar with it, you can ask a decoration company to help deal with it.
The waterproofing of the foundation is not done well. It's very difficult, in fact, if you don't do a good job of waterproofing, it has no effect on yourself. But your downstairs neighbors come looking for you every once in a while.
If you want to solve it, the best way is to find a big waterproof person to knock the floor slab, redo the waterproofing, and complete it. It is better to adjust the measures according to local conditions when laying the floor tiles in the place where the humidity is relatively high at home, so that it is better, such as when laying floor tiles in the toilet, you can consider leaning on the sewer mouth where it is lower, so that it is not easy to accumulate water and avoid many problems. A similar approach can be done elsewhere.
The biggest problem with water seepage in the ground is likely to be waterproofing. The ground is waterproof, especially in the corners, and the water pipes and floor drains must be brushed twice.
The ground area is brushed to the dry area, and the doorway can be used with water strips to prevent seepage. The height of the ground must reach 1.8 meters, especially the place where the notch is installed with flowers, and the place where the water is used with a closer. The toilet environment is humid, if the moisture rate of the tile is too high, it will inevitably cause the inside of the tile to be damp all year round.
After a long time, there will be mold, deformation, and hollowing.
and so on. Ordinary rooms use moisture content.
10% of the terracotta tiles, bathroom floors are recommended to choose the moisture content of the tiles or the moisture content in between the half tiles.
Anti-slip is a topic that can never be avoided in the toilet, and the anti-slip of tiles is basically through the surface process. Glazed tiles with a polished surface can be chosen.
Such as arched bricks, matte bricks.
It is also possible to choose a full-body brick. Or use tile shapes that prevent slipping, such as pebbles.
Mosaic or three-dimensional relief tiles - although they have too many gaps and can cause hygiene problems. If necessary, it is still possible to choose different ceramic tiles in the dry and wet areas. The dry area tiles can be appropriately lowered**, and the wet area is close to the bricks to prevent the bricks from slipping.
-
When choosing tiles, you must choose according to the decoration style of the family, and also choose big brand tiles, because big brand tiles also have quality assurance, and you should also choose tiles with strong waterproofness, which can prevent tiles from leaking, but I think the most important point is that when choosing tiles, it is best to choose pattern tiles, because this will make the home very atmospheric.
-
It is best to choose a light color for the dry and wet separation area of the bathroom, and choose a dark color for the middle waist line, because the bathroom is more humid, so try to choose tiles with good anti-corrosion, and choose tiles with good anti-slip properties.
-
You can choose some waterproof tiles, you should also choose some black or white, which looks really high-end, you can also choose black and white for a splicing, you can choose some first-line brands.
-
To choose non-slip tiles, but also to choose tiles with a relatively high density, which can ensure the flatness of the brick surface and avoid scale.
-
Although the bathroom is not the main space of the home, it cannot be ignored when decorating the wheel of Zhaoyin, such as the color matching of bathroom tiles, and the reasonable matching of tiles can create a comfortable visual effect. In addition, the color of bathroom tiles can be decided according to the size of the bathroom, the lighting effect and personal preference. Let's take a look at the bathroom tile color matching and cleaning tips.
First, the color matching of bathroom tiles.
1. Bathroom tiles should be mainly bright colors, and the surface can be separated by white, which can make the whole bathroom color brighter, and not monotonous, giving people a sense of brightness.
2. The color matching of bathroom tiles can choose beige, gray and black colors, which give people a very avant-garde feeling.
3. The color of the bathroom wall tile and the floor tile should be consistent, if the two colors are very different, it will appear very incongruous, giving people a messy feeling.
Second, how to clean bathroom tiles.
1. Toothbrush decontamination.
After the toilet is used for a long time, some water stains, soap stains and other stains will accumulate on the floor and wall, and some stubborn stains are difficult to clean. In order to better protect our tiles, we are able to use a multi-purpose stain remover to clean them. For the crevices of the tiles that are more difficult to clean, we can use a toothbrush dipped in a little stain remover to remove the dirt, and then brush a waterproof agent with a brush in the gaps, which can not only prevent water seepage but also prevent mold growth.
2. Shovel steel wool ball.
If the toilet is not cleaned for a long time, it will leave a very thick stain, and at this time, ordinary detergents will not be able to remove the stains, so we can use a shovel steel wool ball to clean.
3. The old bath towel is numb.
We don't want to throw away the old bath towels and old linen cloths, in fact, they are good helpers for cleaning bathroom tiles. The washbasin or bathtub will produce a lot of dirt after a long time, and we can remove the mold on it without using detergents, we can use old nylon bath towels. Old linen cloth can be used to clean stains from the cracks of wall tiles.
4. Clean the joints of the tiles with candles.
Gently apply the candle to the joints of the tiles, first vertically, so that the candles can be evenly applied to the joints; Then apply it horizontally, so that the thickness of the tile is equal to the thickness of the candle.
The cleaning of ceramic tiles is very important, affecting the sanitary environment of the whole family, cleaning methods have been listed above for everyone, you can refer to it, the color matching of tiles is also a major link that cannot be underestimated, with a good match, in order to achieve the effect you want, matching skills can also refer to the above.
-
I think that when decorating the bathroom, it is best to do dry and wet separation, because this is not only more convenient, but also more hygienic; I think it's best to use glass for wet and dry partitions, because glass can make the space look more spacious and easier to maintain.
-
When the bathroom is decorated, it is necessary to do a good job of separating dry and wet from the wet and dry separation partition, I think it is better to choose glass, because the glass is easier to take care of, and the material is good, and it is also very tall, which will make the bathroom look very tasteful.
-
Wet and dry separation is what needs to be done; The dry and wet separation partition should be made of glass.
-
Summary. Wet and dry separation is better.
When decorating a bathroom, which is better, a normal bathroom or a dry and wet separation bathroom?
Wet and dry separation is better.
Wet and dry separation is a popular design concept in bathroom design. With traditional bathroom equipment, there is always moisture everywhere after taking a bath, and the humid air stays in the bathroom for a long time, resulting in air pollution. Dividing the bathroom into two and separating dry and wet can keep the venue outside the bath dry and hygienic, and maintain the overall environment of the bathroom clean and beautiful.
The main advantages include: 1. Improved security. Won't slip due to splashing and stagnant water on the floor; 2. Increase the usable area.
Concentrate water vapour locally so that it can be reused elsewhere; 3. Extend the life of the equipment. 4. Save cleaning time. However, the separation of dry and wet has higher requirements for the bathroom area, and the cost is higher than that of the traditional bathroom design.
If there are two bathrooms at home, it is recommended to make dry and wet separation If the area of the home is relatively small, it is recommended to make a bathroom, but it still depends on personal living habits and preferences Dry and wet separation is a popular design concept in bathroom design. With traditional bathroom equipment, there is always moisture everywhere after taking a bath, and the humid air stays in the bathroom for a long time, resulting in air pollution.
-
When many people decorate the bathroom, they will pretend to separate the bathroom from wet and dry, because the benefits of this are still very many. First of all, this way will be safer, because the traditional bathroom, if there is no dry and wet separation, will lead to a lot of water flow in the process of bathing. If there are elderly people or children in the family, it is easy to fall during the bath.
In this way, there will be a great hidden danger to safety, and after doing a good job of dry and wet separation, this hidden danger can be avoided. <>
1. Should the bathroom be separated from dry and wet? What is the reason?
Moreover, the toilet will be made to separate dry and wet, and the practicality will be greatly improved. Because after the separation of dry and wet, people will take a bath, wash, and go to the toilet without affecting each other and not interfering with each other. In this way, it can save time to a great extent, especially for people who have office workers at home, time is still relatively tight, and doing a good job of dry and wet separation will not affect the use of each other.
And in this way, it can make the bathroom as a whole look more tidy. Do a good job of separating dry and wet, you can ensure that the moisture is controlled in the shower room when taking a bath. The squatting toilet area will be kept dry as always, so that the occurrence of bacteria and microorganisms can be avoided, and people will be able to clean more quickly.
2. Conclusion. In addition to avoiding the occurrence of bacteria and microorganisms to a large extent, dry and wet separation can be done. And if there is a customized bath cabinet in the bathroom, it can avoid the wardrobe, dampness, and decay.
And most of the appliances, furniture, are very afraid of water. By separating wet and dry, they can extend their service life. Especially when taking a bath in winter, the temperature itself is relatively low, and if you don't do a good job of separating dry and wet, the warmth will be particularly poor.
If you do a good job of separating dry and wet, you will be able to enjoy the process of bathing without catching a cold. Therefore, those who have plans to decorate or are decorating the bathroom must do a good job of separating the dry and wet bathroom, so as to provide great convenience for their later residence. <>
-
If possible, it is very necessary to separate dry and wet, which can block water vapor, keep the shower area dry, and reduce our cleaning pressure; It can avoid slipping on the ground due to water; Wet and dry separation can also avoid the diffusion of hot gas, and the warmth effect will be better.
-
The bathroom should choose dry and wet separation, because this can make the bathroom very dry, it can also make the bathroom very clean, it can also prevent the bathroom from getting damp, and it also helps our health, and it is not easy to breed bacteria.
-
The bathroom should choose dry and wet separation, because the method of dry and wet separation can make the toilet decoration materials use for a long time, and the bathroom looks particularly clean and beautiful, and there will be no serious dampness.
-
It is definitely necessary to do a good job of dry and wet separation, because only after doing a good job of dry and wet separation, our bathroom will be easier to clean, and the bathroom will not be particularly wet.
-
Dry and wet should be separated, so that it will be very convenient, and the space in the bathroom will become very large. It looks like it's going to get very advanced.
-
Hello, Xiaotianer is happy to answer for you!
brick half-walled
If the space is not well lit, then using brick half-walls is a very good option. Half wall should take into account the problem of lighting, but also to prevent splashing with water, the general height can be set at 1 meter, if the basin to take the decoration method of the basin, the wall can be increased by another 20 30 cm.
Half-wall + glass partition
It is carried out on the basis of semi-partitions, and it is also one of the more popular species nowadays. A new conventional partition is built below, and glass is used for matching above, which not only ensures the problem of lighting, but also divides the sink area, which is more aesthetically pleasing.
In the selection of glass material and transparency, if you pay attention to privacy issues, you can choose Changhong glass, frosted glass and other light-transmitting and opaque materials; If you are more concerned about the brightness and transparency of the space, you can directly use transparent glass, which is a perfect match.
Monolithic masonry wall
As the name suggests, it is to build a new wall to separate the handwashing station from the outside space, and completely hide the handwashing station behind the wall to create a semi-open private space, which is suitable for families who have high requirements for space segmentation and privacy, and the sense of security is instantly full.
The overall masonry wall generally needs to be renovated in hard decoration, and it is necessary to communicate with the designer in advance, and the washbasin countertop can also be expanded according to the wall structure to expand the storage area.
Sidewall storage
The so-called side wall storage, in fact, is to create a niche in the side adjacent wall to solve the storage problem, the general height is about 30 cm, which can easily solve the problem, and does not occupy excess space, but also looks beautiful and natural, simple and atmospheric.
There are no partitions
There are many ways to partition, and naturally you can choose no partition, which can visually expand the space area and has good ornamentation and aesthetics. However, this also means that splashing may occur when using water, so it is recommended to choose a deep sink or wipe the floor in time after using water to avoid slipping.
If you still have questions about decoration, environmental protection, home decoration pollution, home design and layout, etc., you can consult Litian Decoration, and all decoration problems can be answered for you!
How to design the decoration design of the bathroom, how to design the dry and wet separation toilet is reasonable and beautiful? >>>More
1.For those simple toilets, it becomes a very important thing to do dry and wet separation. The separation of dry and wet in the bathroom is not done well, and it will be more troublesome when we usually use it. >>>More
The minimum size of dry and wet separation should be 800*800If the size of your bathroom is sufficient, you can make a curved shape, or you can make a rectangular shape, and the curved one is more space-saving.
1. Glass semi-partition.
This kind of partition does not surround the entire shower area, but only makes a partition on the side of the showerhead, and this design will not feel stuffy when taking a bath. >>>More
The so-called dry and wet separation refers to putting the toilet and shower in one area, and the washing area is separate outside, which is the real dry and wet separation. It must be included in the focus of home decoration design, but I don't dare to agree? The spacious bathroom is designed to separate dry and wet, and the activity space of the two areas can be very wide, whether it is separated by bricks or glass barriers, it will not affect the use of space. >>>More