How to tie a tie, how to tie a tie

Go buy a strip of a pull.

French System 1The tie is wrapped around the neck, and the wide end is longer than the narrow end;

2.The wide end bypasses the narrow end from top to bottom and passes above the collar;

3.Wrap the wide end around again and go up from under the collar;

4.Pass through the tubercle so that the broad end covers the narrow end;

5.Pull and straighten.

This is the most romantic tie, made of three winding knots at the wide end, the technique is simple and bright, usually making the wide end of the tie longer and more chic; The bow tie is loose and considerate.

This style is perfect for casual occasions with a relaxed atmosphere, and when paired with semi-casual outfits.

English 1The tie is wrapped around the neck, and the wide end is longer than the narrow end; Tie half an ordinary knot so that the ends are crossed and the wide ends are on top;

2-3.Hold the narrow end and wrap the wide end around the narrow end to the front.

4.Thread the wide end through the collar from back to front;

5.Then pass the tip of the wide end through the knot;

6.Pull and straighten.

This is the most rigorous tie method, the length of the wide end and the narrow end needs to be specially mastered, the technique is slightly complicated, but the tie is tight and elastic after tying, so that the tie with the traditional color of the tie;

This style is suitable for more orthodox social occasions when paired with orthodox dresses.

Single-knot Windsor-style.

1.The tie is wrapped around the neck, and the wide end is longer than the narrow end;

2.Hold the narrow end and wrap the wide end along the narrow end to the other side;

3.Pass the wide end down from the top of the collar;

4.Tension, knotting;

5.Continue to wrap the wide end around the knot to the other side, passing up from under the collar;

6.Thread the wide end from the front through the knot;

7.Pull and straighten.

This is the most common method, and it seems like a lot of steps, but it is not difficult to do.

The technique is simple and easy to learn, and the bow tie is usually in the right position, making it suitable for beginners or those who don't often tie ties.

Double knot Windsor style.

1.The tie is wrapped around the neck, and the wide end is longer than the narrow end;

2.The wide end passes upwards from the lower part of the collar;

3.The wide end then passes from the bottom of the narrow end to the other side;

4.Then pass the wide end down from the top of the collar;

5.Tighten the formed knot;

6.Place the wide end on the other side from above the narrow end;

7.Then thread the wide end up from under the collar;

8.The wide end passes through the knot;

9.Pull and straighten. This is the most solemn method, first tie an anti-knot as the foundation, and then tie a positive knot, double knots are superimposed to make the tie look more straight and atmospheric; The technique is repetitive, but the bow tie is quite calm, this method is suitable for men with broad shoulders and big eyes, and is suitable for more serious social occasions such as business meetings and negotiations when paired with official suits.

It's similar to wearing a red scarf.

How to tie a tie: Ming Qi1.The tie hangs down around the neck, the big head at the right end hangs down to the thigh, and the thin head at the left end is on the ribs.

2.Straddle the wide end in front of the thin end from right to left so that the lower chin is X-shaped.

3.Wrap the wide end of the tie horizontally around the thin end and around it.

4.Start at the top and go through the opening of the x, then taut.

5.Hold the wide end with your right hand and wrap it in front of the thin end from right to left.

6.With your left hand, keep the triangle intact, place the wide side towards your chest and pass through the X from the back of the ring.

7.Use the index finger of your left hand to open the triangle that now forms above the x and pull the wide end all the way all the way down.

8.To adjust the length, pull the knot upwards toward the collar while tightening the thin end of the tie. You can adjust the horizontal ring if you need to make sure it's flat and even.

How to tie a tie:Tool: One tie.

1. Method 1.

1. Make the thin end a little shorter, and pull the thick end up through and down.

2. Wrap the tie around the knot from right to left and thread it out from behind.

3. Thread the rest of the tie through the hole in the middle and tidy it up.

2. Method 2.

1. Make the thin end of the tie a little shorter and make the thick end longer.

2. Wear the thick end of the tie around the thin end and out from the back.

3. Then put the tie through the small hole in the tie that has just been wound out, and tidy it up.

The steps to tie a tie are as follows:Material preparation: a virtual base tie.

1. First of all, turn the tie over and turn the wide head around it, as shown in the figure below.

2. Wrap the narrow head around to form a "6" shape, as shown in the figure below.

3. Twist to the reverse side with your right hand and pass through the "6" to eliminate envy, as shown in the figure below.

4. The narrow head passes through the hand and pulls each other at both ends, as shown in the figure below.

5. Turn it over to the front after tightening, and tidy it up, as shown in the figure below.

<> "I usually use the red way of playing, which is relatively simple, the knot is very stable, it will not be crooked to the side, and the knot will not be too big.

Double knot Windsor style.

The wide end passes up from the lower part of the collar and from the bottom of the narrow end to the other side. Then pass the wide end down from the top of the collar and tighten it into a knot. Place the wide end from above the narrow end to the other side and up from under the collar. The wide end passes through the knot;

The double knots are stacked to make the tie look crisper and more generous. Although the technique is complicated, the bow tie is quite calm, suitable for people with broad shoulders and a burly body, and it is worn on serious occasions.

The five most commonly used.

Flat knotting is one of the most popular bow tie styles for men, and it is suitable for ties of almost all materials.

Tip: Make a hole under the bow tie so that the sides are evenly and evenly matched.

Cross knots: This is a bow tie that is suitable for thin ties with a single pigment, elegant material.

For men who like to show off their fashion sensibility, you may want to use more "cross knots".

A delicate tie with a double loop knot can create a sense of fashion and is suitable for young office workers.

The special feature of this bow tie is that the first circle will be slightly exposed outside the second circle, so don't cover it deliberately.

Windsor knotsWindsor knots are suitable for shirts with wide necks, and the bow tie should be more horizontal.

Ties that are too thick should be avoided, and bow ties should not be worn too large.

Double cross knots. This bow tie can easily give people a sense of elegance and grandeur, and is suitable for formal occasions.

This bow tie should be mostly used on plain and silk ties, and if it is paired with a shirt with large lapels, it is not only suitable but also has a sense of prestige.

The red scarf can be beaten as much as you want.