How to prune longevity flowers to bloom, and how to prune longevity flowers?

1. How to prune longevity flowers to bloom.

First of all, the second pair of leaves under the longevity flower branches and the flower branches are cut together, overhauled after the flower failure every year, and only need to leave about 3 cm of the branches before the pruning in July, and the others can be cut off.

Secondly, when pruning, it is necessary to cooperate with changing pots and fertilizing, and the pruned branches can be cuttings. Soon the longevity will produce a lot of shoots, and then keep the plant within 10-15 cm, and the excess can be removed.

Finally, it should be noted that longevity flowers should not be pruned in winter and spring, otherwise flowering will be affected. It can be pruned when new branches and leaves begin to grow after full flowering and before July, when it is easy to recover and germinate new branches and leaves, making them bloom more and more luxuriantly. Do not prune after the end of September, otherwise you will cut off the flower branches and will not be able to bloom.

2. How to bloom fast with longevity flowers.

So how to flower quickly, when the longevity flowers have passed the current dormancy period and the weather is cool, the plants with good growth and development will be treated with short days (8-9 hours of light per day) for 3-4 weeks to appear buds and flower.

You can make a black cover, put it on at 4 p.m., and open it again at 8 a.m., you can do it, and it will soon give birth to buds in short daylight conditions, and at the same time strengthen fertilizer and water management, and it will bloom ideal flowers. You can use this shading method to ensure about 6 hours of sunshine every day and the temperature is guaranteed to be about 20 degrees, then you can bloom early.

When there is no flowering, you can give thin organic liquid fertilizer once or twice a month, so as to ensure that the fertilizer is sufficient, and it can also promote the rapid flowering of longevity flowers, and stop applying it in summer. Increase the amount of fertilizer before flowering in autumn and winter, and fertilize to differentiate flower buds, mainly phosphorus and potassium fertilizer, and can use Bika potassium dihydrogen phosphate. People are also very curious about how to raise longevity flowers to burst pots, in fact, it is very simple to master the right method.

The way to prune is to prune the plant after its flowering period is over. If your longevity flower is in good condition after flowering, and there is no malnutrition, you can prune it to make the plant bloom a second time.

At this point, you can cut off the stump on the plant and the first pair of leaves that go down from the stump. Be careful not to over-prune when pruning, as flowering may be affected if you over-prune and the shoots will take too long from germination to bloom again.

In addition to these two methods, when pruning longevity flowers, you should choose a little taller branches, look at the wilted and yellowing and flowering branches, and those who grow in a crowded environment, plant branches grow irregularly are given pruning.

Pruning in spring and autumn is a good time to prune, but in spring and autumn, you should choose when the longevity flowers are not blooming, if they do, you should wait for the flowers to wither before pruning, but remember to prune before September regardless of whether they bloom or not, which will help the longevity flowers store nutrients and bloom.

When pruning the longevity flowers for the first time, it is necessary to pay attention to the height of at least 5cm under the longevity flowers, and then keep the construction of about 12cm, do not cut off the branches and leaves, otherwise the plant will not be able to breathe, if the branches and leaves are too few, it can not provide nutrients to the plant, which can seriously affect the growth of the plant and cause plant death.

1. Prune.

For our cuttings to live longevity flower seedlings, it grows relatively fast, because there are more new roots, and the absorption of nutrients is more sufficient, so after it grows to a certain height, it is appropriate to retain a certain pole at the bottom, and cut it directly from the top, so as to leave a section of the pole and the pot soil surface There is a certain distance, the ventilation at the bottom is better, and it is not easy to cause rotten leaves, and the moisture on the soil surface can quickly volatilize off a part, and it is not easy to silt up after watering, resulting in rotten roots and rotten leaves.

After the pruning is completed, it will quickly grow a number of side buds at the top, these side buds grow to a certain height, we go to keep three or four leaves, cut off the top directly, all the side buds are like this, so that after the topping, it will quickly grow a number of side buds again, the side buds will grow out and continue to top according to this method, and continue to cycle until autumn comes to stop pruning and topping, and then let it grow new shoots and bloom directly. This is the method of longevity flower pruning, which is very simple, and promotes more lateral branches to ensure that it blooms more.

2. Maintenance. The early seedlings are relatively small, we want to let it quickly grow side buds, the trunk quickly thickens, when the leaves grow enough more, long hypertrophy, we have to ensure that the fertilizer and water are sufficient, generally, it is during the seedling period, novices directly use multi-element nutrient solution, nitrogen, phosphorus and potassium balance on it, if you find that your longevity flower seedlings grow slowly, you use high nitrogen content, other elements are not missing, such as the flower of the tenth, fertilization is guaranteed to give her about twice a month, the concentration is not too high, In this way, he will be able to get sufficient nutrients, quickly grow new shoots, quickly grow leaves, and the leaves will be more fat.

It is also necessary to ensure that there must be no lack of light in the growing season, to ensure that it will not grow in vain when it sees sufficient light, if you usually water, you must be under the premise that the soil is breathable, the potting soil is dry and timely to water him, do not use too large pots for cultivation at home, and choose a shorter pot, so that the longevity flowers we raise can grow strongly, and the leaves will grow more fat.

In fact, the longevity flower to cut seedlings rooting speed is very fast, just cuttings of the seedlings its growth is also very fast, if you do not raise the old seedlings of longevity flowers, you can follow the method of Xiao Qi to cut their own cuttings, prune properly after survival, from the seedlings to start pruning, until the autumn, absolutely can grow burst pots, branches and leaves burst out, in the autumn you go to supplement the phosphorus and potassium fertilizer, reasonable to it to see the light, once can be completely exploded.

Before pruning the longevity flower, we should pay attention to the object, season and length, and prune the topping and topping, so that the longevity flower can bloom after pruning.

First, pruning season

Spring and autumn are good seasons for pruning, but when pruning in spring and autumn, you should choose when the longevity flowers are not blooming, if they do, you should wait for the flowers to wither before pruning, but remember to prune before September whether they bloom or not, which will help the longevity flowers store nutrients and bloom.

Second, trim the length

When pruning the longevity flowers for the first time, it is necessary to pay attention to the height of at least 5cm under the longevity flowers, and then prune to keep about 12cm, do not cut off the branches and leaves, otherwise the plant will not be able to breathe, if the branches and leaves are too little, it will not be able to provide nutrients to the plant, affecting the growth of the plant seriously, which can cause plant death.

3. Trim the object

In addition to these two methods, when pruning longevity flowers, you should choose a little taller branches, with a length of about 12cm or more, and don't let go of the branches that look at the wilted and yellowed and flowering eggs, as well as those that grow in a crowded environment, and the plant branches grow irregularly.

Fourth, topping

When the growth height of the longevity flower grows to about 5cm, it is necessary to prune off the new shoots at the top, and pay close attention to the growth of the plant after pruning.

Fifth, topping

Topping should pay attention to the height of the plant, it is best to choose a height of about 12cm when the hand is finely inspected, to prune off the too tall part of the plant before the flower buds appear, keep 3-5 pairs of leaves, and then cut off the top shoots.

The correct way to prune kalancho flowers:

1. Preparation.

To prepare for pruning the longevity flowers, first move the longevity potted plants that need to be pruned to an open, shady place, and prepare the tools for pruning in advance, such as scissors, carbendazim, cuttings pots, and soil, which should be prepared in advance.

2. Pruning process.

This time to the longevity flower menrise pruning, there is no special attention, directly into the bottom of the stem upwards, cut some forked branches short, this pruning, the start is more ruthless, after cutting, found that the longevity flower is bare, there are a few main stems left, after cutting, only to find that I am ruthless enough, at that time I was still a little worried, will it be because of the over-cutting, this longevity flower will hang up. Fortunately, this longevity flower did not hang up, and then lived well.

If you want to make the longevity flowers bloom more, you can choose to prune them in autumn and winter every year, using sterilized sharp scissors to prune off the terminal buds that grow on the new branches of the longevity flowers, and erase the excess buds on the side branches. In addition, it is also necessary to prune off the old, diseased and weak branches on the longevity flowers, and shorten the branches that grow too long, and thin the dense branches and cross branches.

If you want to make longevity flowers bloom more, you first need to choose the right pruning time. The flowering period of longevity flowers is in January and April every year, so it is best to prune in the autumn and winter of the previous year and before and after the flowering period, and spring is the vigorous growth period of longevity flowers.

If you want to make the longevity flowers bloom smoothly, you can prune the top pruning in the spring, prune off the top buds that germinate on the new branches, and then erase the excess flower buds on the side branches, and only keep 2 or 3 full and robust flower buds to improve the quality and quantity of longevity flowers.

In order to make the longevity flowers bloom smoothly, it is necessary to prune off the old, diseased, weak and non-flowering branches on the longevity flowers in the autumn of the previous year, so as to improve the permeability of the branches, increase the light-receiving area, and accumulate more nutrients for the next year's flowering.

In order to maintain the aesthetics of the longevity flower, it is necessary to shorten the overgrown branches, and thinning the dense branches and cross branches, so as to retain only the robust branches.

Cut the excessively long branches short so that the branches are only 3 cm long, and then cut off the dense leaves. 3. Disinfection treatment: spray disinfectant water once and move it to a ventilated place.

4. Breeding environment: provide sufficient light for longevity flowers, and apply phosphorus and potassium fertilizer during flowering.

1. Pruning time

Longevity flowers are generally pruned in spring and autumn, spring plants are in the state of germination, to properly pluck for them, to promote germination of more stems and leaves, autumn to longevity flower pruning, mainly to residual flowers and flower stems, reduce nutrient consumption.

2. Pruning method

If you want to make the longevity flowers bloom, you should re-prune before July every year, cut off all the excessively long branches, keep only 3 cm of branches, and cut off the dense leaves to ensure good light transmittance, so that the longevity flowers can photosynthesize normally.

3. Disinfection treatment

After pruning the longevity flowers, spray them with disinfectant once, or apply a layer of plant ash to the incision to avoid the growth of bacteria, and strengthen air circulation.

4. Breeding environment

When cultivating longevity flowers on a daily basis, they should be placed in a position with good light conditions, so that the plants can receive sunlight, but they should be properly shaded in summer, and sufficient phosphorus and potassium fertilizers should be applied during the flowering period to ensure that the longevity flowers have sufficient nutrients.

Every year from 2 to 5 months after the kalancho flowers have finished flowering, it is necessary to start pruning the residual flowers on the plant, as well as the unopened flower buds. At the same time, all the dead branches and rotten leaves, long branches and leaves, and dense branches and leaves on the plant are all removed. After cutting, place in a cool and ventilated environment to allow the incision to heal quickly.

The long branches that are cut off can be propagated by cuttings.

1. Prune the residual flowers

The flowering time is between February and May, and from the second week after the end of the flowering period, the pruning of the longevity flowers begins. Cut off all the broken flowers or buds that have not yet opened on the plant. On the one hand, it can prevent the flowers from rotting and breeding diseases and pests, and on the other hand, it can also avoid unnecessary nutrient consumption.

2. Prune branches and leaves

In the process of growth, longevity flowers will inevitably appear long branches and leaves, dense branches and leaves, dead branches and rotten leaves, diseased branches and weak leaves, etc., these branches and leaves have no ornamental value, and need to be pruned and cut off as soon as possible. For long branches, it is better to prune the branches to a length of 10 cm, as branches that are too long are prone to lodging conditions.

3. Post-cutting maintenance

After the kalancho flowers have bloomed and pruned, they need to be maintained. Move the kalancho to a cool, ventilated environment to nourish with diffused light. Maintain the moisture of the potting soil with proper watering and do not apply too much fertilizer until the incision heals, and the longevity flowers can be restored to their growth vitality in about 1 week.

4. Propagation by cuttings

Cut healthy long shoots can be used as a substrate for cuttings. Prepare suitable pots and soil, insert the branches into the potting soil, and after reasonable maintenance of light, water, temperature, fertilization, etc., they can become living roots and become a new pot of longevity potted plants.