For plates, what is better?

Solid wood multi-layer board, solid wood multi-layer board is mainly made of three layers or more of one millimeter solid wood veneer or thin board by glue hot pressing, the material of the core of the board is mainly poplar, miscellaneous wood and amine wood, etc., it has high strength and good stability. Solid wood multi-layer board has a large glue content, and it is necessary to do a good job of edge sealing treatment during construction to reduce pollution.

1. Blockboard, blockboard, also known as large core board, has the characteristics of good nail holding force, firm quality, high strength, sound absorption, heat insulation and so on. Moreover, its moisture content is not high, the surface is flat, no warping, no deformation, and will not blister, which is an ideal material for interior decoration and high-end furniture production.

2. Fir plank, which is a kind of laminated timber, is mainly made of large-diameter logs, which is made of deep processing, and the shape is staggered and spliced like a finger. It can be painted and painted directly, saving a process compared to blockboard.

3. MDF (fiberboard), MDF, also called fiberboard, is mainly made of finely crushed wood fibers pressed at high temperature. The surface of MDF is smooth and flat, the material is fine, the performance is stable, the impact is resistant, easy to process, and the application is wide. However, MDF is not moisture-proof, and it is easy to expand and deform when exposed to water, so it is not suitable for cabinets in kitchens and bathrooms.

4. Solid wood particle board, solid wood particle board is now a relatively new environmental protection substrate, produced according to the process of particleboard, with the essence of natural wood, relatively high-grade environmental protection. At the same time, the processing performance is not bad with particleboard, and it has the characteristics of heat insulation and sound absorption. However, its process is relatively simple, so the quality difference is large, it is difficult to distinguish the good and bad products, and its bending and tensile resistance are poor, which is not suitable for making large cabinets.

As long as it is not solid wood, it must be glued, it may contain polluting elements, Quanyou furniture I also use, not solid wood, but his outer skin is better, basically the polluting elements are sealed inside, so it smells a little more tasteless than ordinary furniture, if you want to really eliminate indoor pollution, you still use solid wood.

I've seen the specific ranking of plates, and on good plates, I appreciate Fuqing's more. If you want me to say, its craftsmanship feels unusual, and it is the best choice for users.

Look at the color of the board, you must choose your favorite color to create a satisfactory home decoration effect. When choosing a plate, look at the appearance, see if the plate has scratches, defects, carbonization, wear, cracking, etc., and the appearance is not abnormal, then it is a good plate that can be selected.

Look at the cross-section of the board, the cross-section can help you understand the core material of the board, which is generally dominated by fragrant fir wood, but in the north, poplar, paulownia, Malacca, etc., there are no gaps and gaps on this side, no insect eyes, etc.

Look at the environmental rating. The environmental protection level of the plate is very important, if it is a qualified plate will be marked with the E0 E1 logo, or it has reached the national mandatory standard, then it can be used with confidence. There are also stores that can provide test reports, which can also help us choose good plates.

What are the types of decoration plates?

1. Plywood.

This kind of veneer or sheet glued together has the characteristics of light texture and high strength. Compared with other boards, it has strong resistance to deformation, and it is very convenient to construct, and the glued wood retains the texture of the wood itself, making the plywood more natural and beautiful.

2. Blockboard.

Blockboard, commonly known as. It is made of two veneers glued and spliced in the middle. It is cheaper than fine core board, and its vertical bending strength is poor, but the transverse bending strength is higher.

3. Particleboard.

Particleboard is a thin board made of wood scrap as the main raw material, and then infiltrated with glue and additives pressed. According to the pressing method, it can be divided into two categories: extruded particleboard and flat-pressed particleboard. The main advantage of this type of plate is that it is extremely cheap.

The disadvantage is also significant: extremely poor strength. Generally, it is not suitable to make large or powerful furniture.

4. MDF.

MDF, also known as fiberboard, is a man-made board made of wood fibers or other plant fibers as raw materials, plus urea-formaldehyde, resin or other suitable adhesives. It is divided into high-density board, medium-density board, and low-density board.

How to see the quality of the plate?

1. Look at the appearance of the plate.

The surface of a good plate is smooth and smooth, the edge level of the plate is very clear, and whether the label on the plate packaging is clear, the factory name, address, grade, specifications and other information on it are complete.

2. Smell the smell.

A good board is not only a good selection of materials, but also the glue used for bonding is environmentally friendly, even if the number is relatively large and stacked together, it will not exude a very pungent smell. If the board you choose has a very obvious pungent chemical smell as soon as you place it in your home, then you should pay attention.

3. Feel the touch.

The cross-section of the board should have a wooden feel, and the wood without a wooden feel may not be in place, but the roughness is produced according to the quality of the machine blade, and the product cut out by the sharp blade is very smooth, and the product cut out by the non-sharp blade is not good.

4. Weigh the weight.

We can pick it up, if there is a creaking sound, then it means that the strength of the glue is not very good, we can also pick up the board, weigh its weight, because the better the board, it will have a heavy feeling.

5. Measure the moisture content.

To achieve this may be more professional, you need to use certain tools and services, you don't necessarily have to implement, but knowing this knowledge point is still good for the selection of plates. Another important factor in the quality of the board material is the moisture content, the general moisture content of the board should be within 16%, if it is too high, it is not good, and the cabbage may be mildew or deformed after a while.

After studying for a long time, I finally customized the cabinet, mainly because of the environmental protection of Libo Anxin reed board, which is very reassuring to use, the quality is very good, the material is natural and environmentally friendly, and the color matching is refined and simple, which is what I like. Overall give a 5-star review, it is still worth recommending! There's also a lot of relevant information.

1. Solid wood flooring: Solid wood flooring is a ground decoration material formed by wood after drying and processing. It has the characteristics of natural pattern, comfortable foot feeling and safe use, and is an ideal material for floor decoration in bedrooms, living rooms, and study rooms.

The decorative style of solid wood is back to the basics, the texture is natural, and the solid wood floor is more precious in today's declining forest coverage rate and vigorously advocating environmental protection. Solid wood flooring is divided into three grades: AA grade, A grade and B grade, and AA grade has the highest quality.

When purchasing solid wood flooring, attention should be paid to detecting the moisture content of the wood, and the floor with high moisture content will inevitably be deformed after installation. The floor moisture content in the northern region of our country is 12, and the floor moisture content in the southern region should also be controlled within 14.

2. Laminate flooring: Laminate flooring is a popular floor material in recent years. It is made by pressing the log at high temperature and high pressure after the log is crushed, filled with glue, preservatives and additives, so it breaks the physical structure of the log and overcomes the weakness of poor stability of the log.

Laminate flooring has high strength and uniform specifications.

First, the wear coefficient is high, anti-corrosion, anti-moth and the decorative effect is good, which overcomes the problems of scars, insect eyes and color difference on the surface of the log.

Laminate flooring does not need to be painted and waxed, and it is the most suitable floor material for the rhythm of modern family life. In addition, the wood use rate of laminate flooring is high, and it is a good environmentally friendly material.

There are many practical materials for home decoration, how to choose the right plate for your home, it is important to understand the characteristics of the board.

1. When purchasing, pay attention to the thickness of the wardrobe backboard, the general thickness standard is 18mm, because the backboard is in contact with the wall for a long time, if the board is too thin, it is easy to absorb the moisture on the wall and be damp and deformed. Whether the board surface is smooth and flat, and the texture is clear and natural.

2. When purchasing plates, we should pay attention to the environmental protection of plates, and let merchants show the corresponding plate test reports and related test books, which must meet national standards.

3. When purchasing the plate, look at whether the edge of the plate is fine, the veneer is firm, and the seams are tight, so as to avoid easy absorption of moisture in the air after making the cabinet, which will cause the plate to expand, cause the deformation of the wardrobe, and affect the service life.

Tips for buying plates:

1. Look at the surface. The surface should be flat, without warping, deformation, blistering and depression.

2. Shake. Lift the corner of the board and shake it up and down to hear if there is a squeaky degumming or cracking sound.

3. Tapping. Tap the surface of the plate with a needle-nosed instrument, if the sound on the surface is crisp and clean, it indicates that the density is relatively high, if the sound is dull, the density is low, and there is no difference in the sound in each place.

4. Ask the tree species. There are many kinds of raw materials for plates, which require different processes.

5. Smell the smell. If the board emits a fragrant wood odor, it means that the formaldehyde release is less; If the smell is pungent, it means that the formaldehyde is released.

6. Check the report. The test report will clarify the standard, and there will be a national standard reference on it, including density, moisture content, water absorption, thickness, water absorption expansion rate, etc. in terms of physical properties, and the more it exceeds on the basis of the national standard, the better; In terms of mechanical properties, there are static bending strength, vertical plate tensile strength (internal cementation strength), nail holding force, elastic modulus and formaldehyde emission reference standards, etc.

1. Dawang Coconut: an iconic brand in China's plate industry, an influential and well-known plate brand, one of the top ten brands of ecological boards, and a leading advocate of environmental protection brands in China. Dawang Coconut Group, the industry's first top 500 Chinese brands, recommended products for building energy conservation and environmental protection in the Yangtze River Delta, and the largest modern factory in Jiashan to create a new benchmark for ecological and environmental protection boards.

Dawang coconut board, China's brand with brand value, original aldehyde removal technology, more environmentally friendly, blockboard and ecological board national standard drafting unit.

2. Warm Home: Warm Home Decoration Materials is the leading interior decoration material supplier in East China. Its three domestic well-known brand chain system:

Warm home, Kangfa and Shengxiang meet the diversified needs of the market and meet the infinite decoration needs of consumers for home. China's top ten brands of green plates, top ten environmental protection plates.

3. Rabbit Baby: The key backbone enterprise of Shenghua Group, one of the top 500 manufacturing enterprises in China, is one of the most influential environmentally friendly decorative material manufacturers in China. The company has assets of hundreds of millions of yuan, and has formed a one-stop production and processing base for more than 10 types of decorative materials such as fast-growing poplar planting and tending to production and operation of decorative veneer, plywood, blockboard, craft wooden doors, flooring, craft veneer, laminated lumber, accumulated timber, gypsum board, white latex, coating, paint, wardrobe, etc., and its products are distributed in more than 30 provinces, municipalities and autonomous regions across the country.

Board classification: 1. Solid wood board: 1. Solid wood panel:

Semi-artificial, the method is to take the plank from the solid wood, and use the glue to spell out the artificial board in the way of tooth joint or straight spelling, the majority of the rubber wood in the board market The template used in the building is also a solid wood board, but it is generally made of miscellaneous wood. 2. Solid wood board: directly sawn and dried from solid wood, without splicing, with standard materials.

2. Wood-based panels: 1. MDF: divided into three types: high-density fiberboard, medium-density fiberboard, and low-density particleboard, among which high-density board is generally used for hand-made composite flooring, doors, etc., and medium-density board is generally used to make furniture, and the furniture in the furniture mall is generally made of medium-density board.

Low-density particleboard, also known as particleboard, is also quite popular in furniture, especially for office furniture. The thickness is respectively, high-density board: 8 12 mm thick MDF mm several thicknesses; Particleboard generally has several thicknesses of millimeters.

There are generally two kinds of plane specifications: 1220*2440 and 1800*3600, and the high-density board is not determined. MDF is also used to make melamine boards, i.e. MDF is used as a substrate and a thick layer of melamine paper is pressed on top of it. The substrate is available in both high-density and particleboard, and the laminate floor is made of high-density laminated melamine paper.

Three, blockboard and plywood: blockboard is also called the big core board, that is, with solid wood into a board, up and down a layer of veneer to make, often used as a load-bearing material in decoration, in fact, it is also a kind of plywood, the standard thickness is generally 16 mm plywood, that is, purely cut down the veneer layer by layer of sticky pressing, the thickness is a variety of respectively, the specification is generally 1220 * 2440 mm.

The quality of the Anxin reed board bought in Libo is not bad, with excellent water resistance and weather resistance, with the strength of plastic and excellent processing performance, the size and appearance meet the requirements, quite good-looking, like, a powerful shopping!