Is the notebook keyboard easy to get into dust without a protective film?

It is easy to get into the dust. Supplemental keyboard de-ashing method:

Simple cleanup. 1. Simple cleaning is mainly to clean up some crevices, dust and dirt on the surface of the keyboard. Start by placing the notebook diagonally.

2. Prepare a small brush and a hair dryer. Clean up the dust directly with a hair dryer (the laptop is placed diagonally, and the blowing angle is from top to bottom).

3. Or use a brush to brush the keyboard vertically in one direction, then horizontally downward, and finally clean up the dust.

4. Prepare a towel, wring it out after wetting it (try to wring it out) and then wipe it according to the path of cleaning the brush to clean up the dust.

5. Use a blow dryer to dry the keyboard and clean it up.

Deep cleanup. 1. Simple cleaning is simple and fast, but it is superficial. If you remove the Cover, you'll know how dirty the keyboard really is.

2. The way to remove the keyboard cover is to pull the keys up from the top position. (Generally, the position of the fixed card is above, if your keyboard is fixed at the bottom, pull it up at the lower position).

3. Be careful not to use brute force, and slowly hear a click of the keyboard cap coming out. By the way, the structure, as shown in the figure, there are two things on the keyboard, the key card and the keyboard cap, although the key card can be installed, but it is a little troublesome to install it, so generally only need to remove the keyboard cap).

4. Personally, it is recommended not to remove all the buttons and clean them up on the installation, you can remove a few to clean up and then install them and then clean them up.

5. Generally, there is no need to remove all of them and clean them up, as long as you remove and clean up some keys that accumulate more dust under the keys. This kind of cleanup is time-consuming, so you don't need to use it often.

6. If you get the keyboard card out, it doesn't matter, you can install it with a little more patience, because you can't take pictures without a macro camera, so I won't go into details.

It's easy to get into the dust, and it is recommended that you get a keyboard membrane.

Generally speaking,Notebook keyboard is indeed particularly easy to stick to dust,But as long as you can take a cloth and gently wipe it every day, you can effectively remove the dust,As for the keyboard film,You should consider whether to use it according to your needs,If it is a high-end book,High configuration,High heat generation,Paste the keyboard film not only image feel,Affect the appearance,It will also hinder heat dissipation,And even cause a crash。 If it is a low-end configuration, if you do need to be dustproof and waterproof, you can choose a keyboard sticker with better quality, but the corresponding price is that it will rot (too much force), affect heat dissipation, waste money (throw it away after it is broken), too low-end (it doesn't look like it is classy), and it has caused a psychological shadow for some people (there are psychological barriers, there is a membrane). So said a lewd man).

1. The most direct way is to blow it out from one side with a hair dryer; As a precaution, buy a keyboard membrane and put it on.

2. The keyboard surface of the notebook is the most direct and most vulnerable to damage, you must pay attention not to get the melon seed skin, soot, etc. into the keyboard, and do not prevent dust from entering the computer, causing a short circuit in the circuit, affecting the running speed, and cleaning up gently and in time after finding that there are foreign objects entering.

3. The keys of the keyboard can be removed, and a few can be removed from one side, and then blown with a hair dryer or bladder.

4. The most important thing is to do a good job of daily maintenance. Try not to use a notebook at the same time when eating; If the working environment is dusty, add a protective film and clean the dust regularly.

1. Dust is easy to block the heat dissipation port, and overheating of the machine will cause computer slowness, jamming, automatic shutdown and other failures.

2. Generally, the notebook is disassembled and cleaned and maintained once a year or so, if you disassemble the machine to clean the fan by yourself, first search for the relevant disassembly information on the Internet, and compare it, you must be careful when disassembling and assembling, and look at it several times before you do it.

Computers are something that must be used every day, and many people don't cover their computer keyboards with a layer of keyboard film for the sake of feel. It's been a long timeIt is easy to accumulate some dust on the keyboard, so according to the degree of dirtiness of the keyboard, keyboard cleaning can be divided into simple cleaning and deep cleaning.

1. Simple cleaning

This method is only for cases where the keyboard is not too dirty.

1. Place the side with the keys down for a period of time, due to gravity, some dirty things between the keyboards will fall out by themselves, and you can also gently pat the back of the keyboard with your hands.

2. Use a makeup brush to gently brush in the keyboard to brush out some dust or other dirty things.

3. Use a cotton swab, dip the cotton swab in detergent, focus on cleaning the stubborn stains on the keyboard, and pay attention to the detergent on the cotton swab not too much.

4. Use a dry rag to wipe the keyboard, and the cleaning of the keyboard is complete.

2. Deep cleaning

This method is for cases where the keyboard is dirty

1. Open the circuit board, use alcohol to scrub the circuit board clean, it is recommended to scrub it several times if it is very dirty.

2. Remove the keyboard, and when dismantling, the button should be facing down, and then the circuit board should be facing up, so that the conductive plastic on the button will not fall off.

3. Take out a small brush, clean the keyboard first, and then use a small rag dipped in a little detergent to clean the stains on the keyboard.

4. Check whether the parts in the keyboard are broken, and replace the new parts in time if they are broken.

5. After the scrubbed keyboard is dry, reassemble the parts of the keyboard.

Disassembling the keyboard is more troublesome and also tests hands-on ability, so when the keyboard is not so dirty, we have to clean it up in time, and don't wait for it to be very dirty before doing it.

You can choose some thinner films, which will not affect the feel. The computer's keyboard can be detached. When cleaning, you can remove the keys of the keyboard, and then wipe it clean with dry fingers or some useless strips of cloth.

I think if you want to clean the dust on the computer keyboard coating, you can take a small brush and brush it often, so that it is not easy to accumulate dust.

Now there are sets on the Internet that specialize in selling cleaning keyboards, and ** is not expensive, and it is relatively simple to buy it directly online, and there are manuals.

I always clean it with a cotton swab, first wet the swab, and then clean it up along the gaps.

Use a small brush to remove the dust from the crevices of the keyboard, and if the keyboard is too dirty, you can remove the keyboard to clean it.

If the dust on the surface is used, you can wipe it with wet wipes, and if it is deep, you have to open the circuit board to wipe it, I think the general dust can be brushed with a small brush, and it is best to cover the film, otherwise you will always love dust.

Then wipe it with wet wipes and clean it more, don't accumulate to a certain extent. This is what can be cleaned up with a small toothbrush if it is severe.

You can choose a membrane with a better contact feel, after all, it is still very uncomfortable for the keyboard to be dusted.

Use that little brush to make up and sweep the dust on the keyboard.

If you buy a keyboard protector, you can clean it.

1.Before cleaning the laptop, turn it off and unplug it, and do not operate it with power.

2.There are two ways to dust the keyboard, one is to use a special dust removal rubber ball to gently blow away the fine dust in the cracks of the keyboard, and the other is to use a micro vacuum cleaner to suck the dust in the cracks of the keyboard. If possible, the second method is recommended, which works best.

3.After removing the dust, gently wipe the keyboard with a soft, damp cloth that won't lint off, and wipe it dry with a dry cloth immediately after that. Be careful not to let a drop of water fall into the gap of the keyboard, so as not to penetrate into the main unit and cause a short circuit.

Yes, the keyboard membrane can be removed and washed.

The keyboard membrane is made of silicone, which is adsorbed on the keyboard, so it can be taken off and cleaned, dried and then put on it, and it will not affect the use.

Take off your keyboard membrane and put it in clean water to wash it and let it dry.

Buy a keyboard silicone case.

is transparent. Cheap and easy to use.

Neither water nor food scraps can fall in.

If it is dirty, take it down and wash it