Is there a good solution to the insulating glass leakage in the home?

1.First remove the foggy glass to check what the cause is, see whether the butyl glue on the aluminum spacer is evenly glued, and then see whether the outer sealant is well sealed. 2.

If there is a molecular sieve and the seal is not sealed, then the original molecular sieve in the aluminum spacer can be poured out after the hole. After pouring in a new molecular sieve, and then sealing the unsealed place with glass glue on it.

There is no way to do it, because once the air leaks, there will be water vapor inside, which will make the glass opaque with the change of temperature.

No, this situation can only be replaced with a new one, because if it is forcibly repaired, the sound insulation effect will become worse and will not work.

Generally, the door and window glass of the community is guaranteed for two years, and the developer is responsible for the maintenance, and the maintenance fee is responsible for the owner after the warranty period.

Vacuum glass has great advantages in heat insulation and sound insulation, and is almost close to the performance of the wall. However, due to the high cost of vacuum glass, it has not yet begun to be popularized for civilian use. If the perimeter of the insulating glass is not sealed properly, it is easy for air or rain to enter, so wait until the inside is dry and put a layer of glass glue on the outside of the glass frame spacer.

It can effectively alleviate the phenomenon of non-sealing and reduce the fogging and moisture of the glass.

<> find someone who makes doors and windows to deal with it. Solution: 1. Replace one piece. 2. Secondary waterproof glue treatment. The second saves money. Sliding windows.

The sealing strip is flush with the window frame, and can only be held with a kitchen knife, pressed in the seam, struck with a small hammer, so that the knife is embedded in the seam and stuck, and the bottom of the knife is pressed with a wooden strip, and then struck with a small hammer, the strip will come out of the card slot, and the rest of the methods are the same as above. Although the glass is not vacuum, it will be much better in comparison. Vacuum glass leakage will affect the sealing performance of the glass, mainly affecting the sound insulation effect and thermal insulation, but the impact is not large, so you don't have to worry too much.

After drying, it should be no problem when it is loaded. This technical content is not high, if you feel troublesome, go to aluminum alloy doors and windows.

shop, let them change it for you. A square glass is about seventy-five, and it can be added to the labor fee, and it doesn't cost much. You can ask the seller or manufacturer for repairs.

If you don't want to spend any more money on repairs, you can ignore this situation because it only partially loses its effect. It's just that at some point, the fog in the glass is "unsightly", and the amount of repair is deducted from the construction team's warranty.

However, the warranty period has already passed in 9 years, and the developer and the construction contractor have already settled clearly. Window glass is generally warranted for two years.

The adhesive strip used to seal between the two layers of glass needs to be removed first; Then remove the outer layer of the glass and clean the surroundings to avoid dust, etc., which will affect the repair; After cleaning, apply glass glue on it, and reinstall the adhesive strip, if the adhesive strip is deformed, you need to replace it with a new installation.

First of all, you need to find the staff at the time of installing the glass, if you look for the staff at the place where the glass is installed, if he can re-vacuum, it is actually possible to repair it, but if it cannot be re-vacuumed, it cannot be repaired.

If the vacuum glass leaks air The main reason is because the air conditioner between the two layers of glass is loose, and in such a situation, you can contact the glass manufacturer for replacement, but in addition, it cannot be repaired by yourself.

You should immediately find a professional maintenance team to repair it, and re-make the glass into a vacuum state, don't do it yourself, it's easy to puncture yourself.

At this time, you must choose to replace it with a new glass, and then seek the help of professional staff, so that you can achieve the effect of warmth.

You have to replace it with a new piece of glass, so that the air will not enter the vacuum, and the vacuum glass will play its due role.

There should be no way to repair this, and you can only choose to replace a piece of glass, because the quality of this glass has been problematic.

Summary. Generally, the insulating glass installed in the building leaks, and the warranty time is about 5 years. Nowadays, many people are directly targeting the developer when they buy a house, and there are also many small partners who are still off-plan when they buy a house, and then many facilities in this house have not been installed, but the real warranty time is calculated from the acceptance of the house, and most of the infrastructure in the house is guaranteed to be free of problems within 5 years.

In fact, some buildings have a longer warranty period, which may reach about 8 years, or even 10 years. But when the time comes, the developer will definitely not care, and you can go to the property to solve the problem at that time.

It has been one year and eight months since the installation, the glass is leaking, and the after-sales service of the installation is not responsible.

Insulating glass leakage maintenance costsAfter the insulating double-layer glass plastic steel back ear window leakage and ash and water ingress, it can be removed and replaced with a new one. Leakage cherry blossom cloth demolition and installation labor costs, glass, glue, transportation add up to nearly 100 yuan square, this does not include the profile to be replaced, if the window sash also has to be replaced, it has to be 180 yuan square up.

The question I ask is, who is responsible for this expense? There's no warranty for this thing or something.

Generally, the insulating glass installed in the building leaks, and the warranty time is about 5 years. Nowadays, many people are directly targeting the developer when buying a house, and there are also many partners who buy a house in the off-plan house, and then many facilities in this house have not been installed, but the real warranty time is calculated from the acceptance of the house, and most of the infrastructure in the house is guaranteed to be buried within 5 years without problems. In fact, the warranty period of some buildings will be longer, maybe about 8 years, or even 10 years.

But when the time comes, the developer will definitely not care, and you can go to the property to solve the problem at that time.

Is there a good solution to the insulating glass leakage in the home?

If there is a problem of air leakage in the insulating glass, you can prepare a screwdriver to remove the sealing strip of the Zhongshu Yunsakura empty glass, and then use a wallpaper knife to hold down the glass and slowly peel it off, and place a layer of glass aside. If there is an air leak, there may be water vapor inside, or due to high temperature, there is a problem of discoloration, wipe it with a clean cloth first, put it aside and wait to dry, or release the moisture through the desiccant. Leave it for a few hours or speed it up, or you can use a hair dryer to blow it down to help the moisture evaporate faster.

Next, the cut part is covered with structural adhesive, and the removed glass is reinstalled and fixed. Then use structural adhesive to seal the two layers of glass, and the structural adhesive can not be too much. After a little solidification, the window can be installed, so that it can be used as a sealed potato bush, and there will be no more air leakage problems.

Is there a good solution to the insulating glass leakage in the home?

Plastic steel window double-layer insulating glass leakage treatment method: after the gap between the wall and the window is filled with foaming agent, the gap between the window and the wall must be sealed with waterproof sealant outside, of course, the premise is that the gap is not too large. If the gap is too large, it must first be filled with waterproof mortar and smoothed, after the doors and windows are installed and fixed, the windows should be filled with foaming agent, cut and smooth after curing, and finally the outer buried orange frame is sealed on both sides inside and outside.

If the crack is not big, just fill it with sealant. If the crack is large, it should be filled first, and then sealant should be used. Frankly.

The adhesive strip used to seal between the two layers of glass needs to be removed first; Then remove the outer layer of the glass and clean the surroundings to avoid dust, etc., which will affect the repair; After cleaning, apply glass glue on it, and reinstall the adhesive strip to a high type, if the adhesive strip is deformed, you need to replace it with a new installation.

2. What are the advantages of using vacuum glass.

1. Low carbon and energy saving.

The use of vacuum glass has a low-carbon and energy-saving effect, because it has a vacuum layer, which can have the effect of renting rubber and sound insulation heat conduction, avoiding the heat transfer from the outside to the interior, and its heat transfer coefficient is very similar to that of the wall. In this way, excessive energy waste can be avoided when heating or cooling, and emissions can be reduced, which has an energy-saving effect.

2. Heat insulation.

Vacuum glass also has a shading coefficient, if used in summer, it can effectively control the heat transmitted by the sun, so that the indoor temperature is lower than the outdoor, and at the same time, in winter, it can reduce the indoor temperature drop and maintain a more comfortable indoor warm environment.

3. Sound insulation and noise reduction.

The large function of vacuum glass is in terms of sound insulation, and the noise pollution in modern cities is very serious, and if there are no noise reduction measures, it is very unfavorable for daily sleep. Its vacuum layer can effectively block the sound and avoid medium and low frequency noise.

Air leakage means that the quality is not good, so replace it with a new one. It is recommended to choose an excellent manufacturer. For example, Randy's tempered vacuum glass, ***, has after-sales guarantee.

The vacuum glass leakage is mainly caused by the loose buckle in the middle of the two layers of glass. Generally, this situation is mainly related to the factory quality of the glass, if it is still within the warranty period, you can directly contact the manufacturer for replacement.

Vacuum glass is to close the two pieces of flat glass around, the gap is pumped into a vacuum and seal the exhaust hole, the gap between the two pieces of glass is, the two pieces of vacuum glass generally have at least one is low-emissivity glass, so that the heat lost by the conduction, convection and radiation of the vacuum glass is minimized, and its working principle is the same as the thermal insulation principle of the glass thermos flask.