Double glazed fogging is not dismantled

Double-glazed windows fog up double-layer non-dismantling treatment of four steps:

Step 1: Check whether the glass atomization is caused by the temperature difference between the inside and outside, you can use open windows for ventilation to make the temperature difference between the two sides smaller, and see if the atomization will be reduced or disappear.

Step 2: Check the glass sealant to see if it is fogging up because the glass sealant is not sealed properly. If this is the case, you can use a professional tool to remove the sealant and replace it with a new one. Pay attention to try to find professional workers to use machinery to seal the sealant.

Step 3: If there is no problem with checking the sealant, check the position of the double-glazed sink, which may be due to the fact that the glass sink is not properly installed. This one can be removed and reassembled.

Step 4: There is no problem with the first three inspections, you can check the spacer in the glass. It is possible that fogging may occur due to poor performance of the center spacer. You can choose to change the center spacer.

Solutions for fogging of double-glazed windows:

1. If the phenomenon of fogging of the double-layer glass caused by the sealant is not tightly sealed, the sealant on the double-layer glass can be removed with a tool, and the glass window can be cleaned again, and the glass window sealant is painted after it is dried.

2. If the sink of the double-glazed window is not installed, the double-glazed window should be removed and reinstalled.

3. If the partition strip in the double-glazed window is installed, a glass gasket can be added to the double-glazed window. Remove the original septum and reinstall the septum, pay attention to the pasting position of the septum and the edge of the glass window, generally 2 mm is the most suitable. And when installing glass windows, be careful not to get water on the septum, so as not to affect the installation quality.

4. If the fogging phenomenon is caused by the temperature difference is too large, the window can be opened for a while to make the temperature difference between indoor and outdoor smaller, until the fog on it dissipates.

The double-glazed fogging is not dismantled as follows:

When processing, you can open the window for ventilation, reduce the temperature difference and reduce fogging, it is also a very simple method, if the window sealing performance is poor and causes vibration, it is recommended to remove the sealant.

Re-gluing, if the position of the sink is dislocated and caused by zeroing, it can be removed and reinstalled to ensure the effect of use. If the fogging phenomenon is caused by the thermal insulation strip in the middle of the glass, it is necessary to add a glass gasket to the double glazing.

Or reinstall the insulation strip, paying attention to the position of the installation, keeping it about two millimeters from the edge of the glass.

The production process is to separate two pieces of glass by an effective sealing material seal and spacer material, and to install a desiccant that absorbs water vapor between the two sheets of glass.

Thus guaranteeing insulating glass.

The interior is dry for a long time. After the treatment of the air layer, there is no water vapor, and the dust exists, and at the same time, the insulating glass is easy to carry out large-scale industrial and chemical production to ensure people's use, so the insulating glass is a large number of recommended products in new buildings. Generally, two pieces of flat glass are used for molecular sieves.

It is a glass component made of isolation, filled with dry air in the middle, and sealed with organic adhesive cementation and other methods around it.

The treatment method of fogging and not dismantling the double-glaze is as follows

Open windows for ventilation and reduce temperature differences, thereby reducing the degree of fogging.

Attach an anti-fog film to the glass to reduce the degree of fogging of the glass.

Replace the sealant on the double-glazed seepage belt, remove the original sealant, clean the double-glaze, and replace the sealant after it is dry.

The above methods can solve the problem of fogging of double glazing, and you can choose the appropriate method according to the actual situation.

The treatment methods for fogging double-glaze without dismantling are: failing ventilation, using dehumidifiers, wiping glass, using defogging agents, and changing double-glazed glass.

1. Ventilation: When the weather is sunny and the temperature is suitable, you can open the window for ventilation to let the humid air flow out of the room, and at the same time let the dry air from the outside enter the room, which is conducive to the drying of the glass surface.

2. Use a dehumidifier: In the humid season or humid environment, you can use a dehumidifier to absorb the moisture in the humid air in the room and reduce the indoor humidity, so as to effectively prevent the glass from fogging.

3. Wipe the glass: If the fogging of the glass is not very serious, you can wipe the surface of the glass with a clean towel or paper towel to remove the moisture on the surface and make the glass surface clean.

4. Use defogging agent: There are special defogging agents on the market, which can be sprayed on the surface of the glass to effectively prevent the glass from fogging, but it needs to be sprayed regularly.

5. Replace double-layer glass: If the above methods cannot effectively solve the problem of glass fogging, you may need to consider replacing double-layer glass, choose double-layer glass with good sealing to ensure that the indoor air is dry, and fundamentally solve the problem of glass fogging.

Windows can be opened for ventilation. There are many reasons for double glazing to fog, if it is caused by the temperature difference, you can open the window for ventilation and reduce the temperature difference to avoid fogging. If it is caused by poor sealing, it is necessary to disassemble and remove the sealing strip and re-apply the glue.

Double glazing is a glass component made of two pieces of flat glass isolated by molecular sieve, with a dry interval in the middle and sealed with glue around the perimeter.

Generally, desiccant is put in the middle of the double-glazed banquet, so as to ensure that the air layer is dry for a long time, without water vapor and dust.

Double glazing is a good acoustic and thermal insulation, and is often used as a window for stalls in various industries, such as buildings, refrigerated cabinets, railway vehicles, etc.