Tissot Le Locle mechanical watch does not turn, how much does it cost to repair

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

If the new watch stops running, and the winding energy is still not running, go to the after-sales service, and maintain it free of charge within two years. If you wear it for more than two years, it needs to be tested after sale, and then it will tell you what needs to be repaired and **.

The cost of watch maintenance is generally given by a professional maintenance master after a comprehensive inspection of the watch, and will also explain to you the specific maintenance items corresponding to the maintenance **, so that you are more aware of which part of your watch is repaired, and you will be more assured to hand over the watch to the master.

Hello, glad to answer for you!

The main reasons why the watch does not go are the misalignment of the core gear, the magnetism of the watch, bumps, and the long shelving time, and the oil sludge is dry. The most common reason for the failure of the watch not going is the lack of power of the watch and the movement of the watch does not work.

When the mechanical watch suddenly stops, the priority is to think about whether it is caused by lack of power. Hand-wound watches should be wound at the same time every day as much as possible so that the watch can operate with sufficient energy for the next 24 hours.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

You can go to the after-sales service to see, Wanling Hui has an after-sales service, don't go to those small repair shops for maintenance. After-sales service not only has professional technology and precision instruments, but also has more high-quality service and first-class system. It will not be messed up with other repair shops at all, and you don't have to worry about the quality of watch repair - 1 year extended warranty.

The cost of each maintenance of the Tissot Le Locle series ranges from about 400 yuan to 1,000 yuan.

The cost of each maintenance of the Tissot Le Locle series is about 400-1000 yuan, and the specific maintenance ** depends on the content of the maintenance of the Tissot Le Lock, as well as the pricing of the Tissot Le Locker series that needs to be maintained. Generally, the fee for grinding and polishing is 500 yuan, and the ** for movement maintenance is about 200 yuan.

How to maintain a Tissot Le Locle watch:

1. The sweat on the hands is easy to produce a certain corrosiveness to the Tissot watch Le Locle series, because it is nickel-chromium alloy, corrosion resistance, semi-steel and copper, and sweat, easy to corrode long-term contact, should often use a professional watch cleaning machine watch to clean the watch or pad the plastic watch, to prevent it from being eroded by sweat.

2. Do not open the back of the watch at will, so as not to affect the normal operation of the watch, and do not destroy its own regular characteristics.

3. Don't put your watch in the closet, mothballs will spoil the watch oil.

4. Do not put the watch on the amplifier, stereo, TV, so as not to magnetize.

5. Tissot watches should be given a short period of time to move the Le Locle series every month, the so-called life lies in movement, people are like this, so is the watch, the automatic movement watch back and forth should gently swing on the wrist for a few minutes or a period of time. Therefore, this part will not be stationary for a long time to ensure the normal operation of the performance of the watch. <>

Tissot Le Locle automatic watch, what happens when it is manually wound and does not move?

Based on the quality assurance of Tissot watches, if the Tissot watch does not go away, the preliminary estimate should be that the energy inside the watch is gone, and the customer can first shake the watch back and forth about 70 times, or take the manual winding method; But if the automatic watch appears and the Tissot watch is gone, there is no need to help it wind it every day, as long as it is worn for more than 8 hours a day, it can be automatically wound to ensure sufficient power; But if the watch is still brought up, the Tissot watch does not leave, then you can only find Tissot's ** dealer for repair. The shelf life of Tissot watches is about 2 years, so there is generally no situation where the Tissot watch does not go, but in case it does appear, as long as you have the relevant proof, you don't have to worry about repair.

Summary. Hello: Regarding your question, I think that first of all, the fully automatic watch should not be wound, wear it for 6-8 hours a day, and add more wrist exercise, and cancel it for a day.

There are two possibilities for you in this situation, either the clockwork is full, you try to leave it unattended for a day or two, and then manually reload it, if you can, it's fine. If it still doesn't work, it's a movement failure. Then you have to bring your warranty card to the after-sales department for after-sales maintenance.

Tissot Le Locle automatic watch, what happens when it is manually wound and does not move?

Hello: Regarding your question, I think that first of all, the fully automatic watch should not be wound, wear it for 6-8 hours a day, and add more wrist exercise, and cancel it for a day. There are two possibilities for you in this situation, either the clockwork is full, you try to leave it unattended for a day or two, and then manually reload it, if you can, it's fine.

If it still doesn't work, it's a movement failure. Then you have to bring your warranty card to the after-sales department for after-sales maintenance.

Hope it can help you.

There are several reasons why Tissot Le Locle watches don't work automatically:

1.Insufficient power reserve: The movement of a watch requires a certain amount of energy to function properly, and if the watch is not worn or used for a long time, it will result in a low power reserve. In this case, you can provide enough energy to the watch by shaking it or turning the crown.

2.Faulty automatic winding: Tissot Le Locle watches have an automatic winding mechanism, and if this component fails, it will affect the normal operation of the watch. In this case, the watch needs to be taken to a professional repair center for service and maintenance.

3.The balance system: The balance wheel is a very important part of the movement, it controls the movement cycle and drives the hands.

If there is a problem with the balance wheel (e.g. shock, magnetization, etc.), the movement will not work properly. In this case, it is also necessary to take the watch to a professional repair center for inspection and treatment.

In short, in the case that the Tissot Le Locle watch does not automatically turn on, it is recommended to try to provide it with enough energy first and observe whether it returns to normal; If there is still a problem, you should contact the brand after-sales service center or professional repair shop in time to deal with it.

The main reason for the loose gears of the Tissot mechanical watch is to see what is going on, whether it is the movement to be polished and maintained, or whether the gears need to be replaced.

If you change the gears, you need to judge according to the parts, and the gears in different positions are not equal. It is recommended that your watch be taken to a professional service point for repair. In this way, you can be sure that the original parts and professional technicians are used in the repair process.

If it's just loose and tight, it costs about 200 if you wipe the oil.

In addition, different regions and different repair shops, maintenance technicians have different levels, different parts quality, especially the zero price difference between the original factory and the non-original factory, so there is also a gap in charges. It is recommended to choose a professional maintenance center like Guanya Hengda.

In addition, no matter how good the function of the watch is, and no matter how exquisite the design of the movement of the watch, it is always the fundamental duty of a watch to ensure that the function is excellent. In daily life, mobile phones will inevitably encounter various accidents that lead to problems, so watch maintenance is very important, especially brand-name watches, which are very expensive in themselves. The following is a detailed introduction to all aspects of the maintenance of brand-name watches.

Precautions for the maintenance of Tissot watches.

1) When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, which is in contact with sweat for a long time, and is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat.

2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3) Do not put the watch in a closet with mothballs to avoid the deterioration of the watch oil.

4) Do not put the watch on the radio or TV to avoid magnetization.

5) Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a stationary state for a long time, so as to ensure the operation performance of the watch machine.

If you are not under warranty, you can go to the place where you repair the watch, which is much cheaper than after-sales. 20 yuan can't be used.

1. First of all, use a warping knife to open the movable needle of the strap, as shown in the figure below.

2. After canceling the movable needle, the strap will be taken out smoothly, as shown in the figure below.

3. Repeat the steps on the other side and take out the strap as shown in the figure below.

4. Then, place the new strap into the active needle, as shown in the image below.

5. Then snap one side of the movable needle into the dial, as shown in the figure below.

6. Finally, clamp the other side of the movable needle with a warping knife, as shown in the figure below.

7. In this way, the strap will be replaced successfully, as shown in the figure below.