Is Blancpain warranty? Is Blancpain Aftermarket an official repair?

The magnetic field is everywhere, and it is impossible to prevent it, and it turns out that with a good end of the watch, the error suddenly becomes larger, and the first thing to guess is whether it is magnetized. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so watches are very susceptible to magnetization. Once the mechanical watch is magnetized, the impact is first of all to increase the error, and in serious cases, it will also stop the watch.

When wearing a watch, if the watch accidentally comes into contact with a generator, motor or other objects with a strong magnetic field, or if the watch is left on the radio or TV, the watch will be magnetized, and the watch will be inaccurate, or even stop. In this case, you should go to the watch repair department as soon as possible to repair it to a professional to ensure that the watch will not cause more inconvenience to your daily life after it is demagnetized. Therefore, I would like to remind you that when wearing a watch, you must pay attention to keeping the watch away from objects with strong magnetic fields.

1. If the watch is magnetized, you can take it to the customer service center or the watch repair master, and test it on the meter to know the problem.

2. If it is inconvenient to maintain it far away from the watch shop, you can find a piece of iron (ring) that is in the shape of a circle in the middle and is not magnetized, put it on the table, and slowly wear the watch through the iron circle, and the magnetism on the watch will be absorbed by the iron;

3. Put the watch on a clean iron plate without magnetization, so that the magnetism of the watch will gradually disappear after two days, and demagnetization can be carried out by going to a watch repair shop.

If the watch is magnetized, you can take it to the customer service center or the watch repairer, and test it on the meter to know the problem.

In order to drive the hands, the watch uses a beating method to make it turn by using the characteristics of a magnet. Therefore, if it is affected by strong external magnetic waves, it will not function normally, and it is also the cause of the watch to become faster, slower or stopped. Please be aware of the following items that generate magnetic waves:

Direct magnetic realm: causes of stopping and slowing down, such as magnetic health appliances, headphones, audio speakers, refrigerator magnetic doors, etc. If you find that the watch is not allowed to be magnetized, you can hand it over to a professional repair shop for demagnetization.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

If there is a problem with the watch, it is better to send it to the watch after-sales center for maintenance as soon as possible. Wanling Hui has an after-sales service, don't go to those small repair shops for maintenance. Not only are they not empowered, but their technology is not professional enough.

The instruments are not very sophisticated. **It's also misreported. It will also cause the watch to be out of warranty.

Blancpain Aftermarket is an official repair. Blancpain is renowned for its watchmaking tradition, craftsmanship, technical excellence and design excellence. Blancpain is a Swiss luxury watch brand, headquartered in Switzerland, founded in 1735 by Jahan-Jacques Blancpain, and the first registered watch brand in the world.

Blancpain's aftermarket service is an official repair that can be carried out at the point after the watch has been damaged.

Customers need to make an appointment online, after determining the time, you can bring the watch and the extended warranty to your nearest maintenance outlet, we Yamate Ashi will arrange a professional technician to pre-check your watch, and give maintenance suggestions and estimates**, the customer confirms the service and enters the service process, the service is completed will send a notice to take the watch, and the customer can take the watch with a voucher.

How to mail it to the shop for repair:Support mailing service, customers can make an online appointment first, and then through the regular courier company, the watch and the extended warranty (if any) sent to the service outlets, the potato friends will give you feedback and take photos for the first time after receiving it, and then by the professional technician to your watch into the pre-inspection, give maintenance**, the customer confirms the service and enters the service process, and returns by mail after completion.

Hello, the watch will cause the problem of inaccurate time after being magnetized, although the quartz watch will not be magnetized, but there will be a phenomenon of stopping in a strong magnetic field. Therefore, when using the watch in daily life, it must be kept away from the magnetic field, away from TV, radio, induction cooker, etc., which will be magnetized due to long-term contact.

Many friends may be very confused, how can you tell that the watch is magnetic? There are many reasons why the watch is inaccurate or does not go, and the magnetic field in our daily life is everywhere, in order to accurately judge whether the watch is magnetized, you can use a flexible compass, put the compass flat on the table, hold the watch and shake it back and forth above the compass, if the needle of the compass moves, it means that it is magnetized.

There are two ways to degauss:

Methods of degaussing.

First, it is a professional demagnetization of the watch shop.

Methods of degaussing.

2. If you are far away from the watch repair shop, you can also demagnetize yourself, the specific method is: find a piece of iron that is hollow in the middle and is not affected by magnetization, stand firmly on the table, and then the magnetism on the watch can be "sucked" by the iron block to restore the watch to normal. It is to use a magnetized iron can, the two ends are connected, and the magnetized love watch can be demagnetized by moving back and forth in the iron can for 5-6 minutes.

Because there are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, watches are very easy to be magnetized.

The speed of a mechanical watch is controlled by a hairspring and a balance wheel. When the watch is magnetized, the magnetic force causes the frequency of the balance to swing, so the speed of the gear system also changes, and the watch may stop, slow, or fast. If the symptoms are mild, the daily error is tens of seconds. In severe cases, the daily error is several points.

In daily life, it is necessary to avoid placing the watch next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men use mobile phone covers to turn magnetic buckles, which may cause the watch to be inaccurate or temporarily stopped. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to return to normal.

Watches often appear next to these electrical appliances (mobile phones, televisions, computers), and after being magnetized, their magnetism will not recede by itself, affecting the timing of the watch at least, or stopping directly. Although you can degauss yourself at home according to the online method, it is easy to have unclean degaussing, which affects the operation of the movement. The need for degaussing is actually very simple, it is recommended that you go to a professional maintenance network to use the demagnetization machine, which can be perfectly solved in a minute or two.

Watch magnetization treatment method: 1With a finished watch demagnetizer, about a few tens of yuan a piece (the inside is a coil, with an iron core in the middle, connected to 50Hz alternating current, generating alternating magnetic field demagnetization), can also be self-made;

2.Put the watch on a non-magnetic iron plate for a few days, the magnetism will be conducted to the iron plate, of course, the larger the volume of the iron plate, the greater the magnetic capacity, and the better the effect;

3.Slowly pass the watch through a non-magnetic ring, which will be left on the ring;

4.The most common and safest way, if it is too troublesome or feel that you can't get the magnet clean, then you can go to the watch shop or warranty point to find a watch repairer to repair.

Take the invoice insurance card to the store for maintenance, you ask, there is no money for the insurance card.

Hello, this is a small problem, you can go to the local shopping mall to sell watches, there will be a maintenance watch next to it, you can ask the waiter, degaussing is very simple, ** is not expensive, our local is fifteen yuan, your location is not clear, before and after will not exceed two minutes to demagnetize.

Method 1: Professional degaussing. Magnetization is a relatively common phenomenon, the solution is not difficult, just go to the authorized maintenance department with special equipment for demagnetization, only 30 seconds, the watch can be demagnetized, there will be no impact on the performance of the watch.

Method 2: Self-degaussing. Find a piece of iron that is hollow in the middle and is not affected by magnetization, stand it on the table, and then the magnetism on the watch can be "sucked" by the iron block to restore the watch to normal.

You can also spend dozens of dollars to buy a degausser, which is convenient for the watch to use when it is magnetized.

If there is a problem with the watch, it is recommended to go to the regular point of after-sales maintenance, not only the technician is more professional, the instrument is also more precise, and the **transparent is not messy**. My personal advice is to pass as soon as possible, otherwise the longer the time, the greater the problem with the watch, and the greater the economic loss. The main thing is that it is still more troublesome, and the repair time will become longer.

You can go to the after-sales service to see, Wanling Hui has an after-sales service, don't go to those small repair shops for maintenance. After-sales service not only has professional technology and precision instruments, but also has more high-quality service and first-class system. It will not be messed up with other repair shops at all, and you don't have to worry about the quality of watch repair - 1 year extended warranty.

The watch should avoid being close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men use mobile phone covers to turn on and off magnetic buckles, which may make the watch magnetic, causing the watch to run inaccurately or temporarily stop.

You have to go to the brand's after-sales personnel for professional degaussing.

Blancpain's Watch Service Center is located in Room 3705, Building 2, Grand Gateway, No. 3 Hongqiao Road, Xuhui District, Shanghai. If it doesn't work, go to a regular watch repair shop and let the watch masters take a look, so as not to mess up, causing the hairspring to be short, and it will be more difficult to repair the branch when it is changed.

For the treatment of faults such as Blancpain's mechanical watches, demagnetization must be carried out neatly and thoroughly; Then check the position error of the watch, continue to check the hairspring, clean the hairspring with alcohol, it will be more fuel and tidy, volatile is good, and the low-quality fuel and magnetic field will make the hairspring show up to circle or attract each other. It is best to do a timekeeping quiz on the repaired watch, and it is best to do a long-term dynamic check, which all-round rotating experimental rack is to be on, or is Kai Jianmin directly wearing it to check carefully. Those hidden deep faults can only be detected with the help of relevant instruments.

Magnetic fields are everywhere, and it is impossible to prevent it, and Hublot watches, which have always been very accurate, suddenly have a time error, and the first thing to guess is whether the watch is magnetized. Hublot mechanical watches contain a lot of stuffy steel materials, such as large and small steel wheels, escape wheels, gear tenons, bearings, bending screws and hairsprings, so the watch is very susceptible to magnetization. Once the Hublot mechanical watch is magnetized, the first situation that will affect it is that the watch is not accurate, there is an error, and in the serious case, the watch stops.

Moreover, in the development of today's social life, more and more electronic products appear around us. Therefore, the magnetic field is present around us, and there is only a difference in the strength of the magnetic field. Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel.

There is also the magnetic buckle on the leather bag, and the watch and credit card are the most afraid of being stained with magnetism. Hublot mechanical watches are generally magnetized to go fast (serious will stop), if the hairspring is stuck together, then the Hublot watch will go faster, about 2 hours or so faster. Steel parts are most susceptible to magnetization, including escape wheels and pallet forks.

The simple way to tell is to use a sensitive point compass and lay it flat. Then the Hublot watch is quickly and repeatedly overlaid over the top of the compass, and this action also needs to change the watch in a few more directions, and then repeat. As long as the needle of the compass moves, it means that the watch has been magnetized.

The principle of the demagnetizer is that it can produce an alternating magnetic field, and if the watch is placed in this magnetic field, it will be demagnetized, and if it is a constant magnetic field, it will be magnetized. Demagnetizers can be bought or made by themselves, and generally professional watch stores have demagnetization services. Moreover, in your daily life, you must be careful not to place your watch near or near electrical appliances that generate magnetic fields (such as stereos, refrigerators, computers, etc.), or magnetic objects (such as magnets, mobile phones).