Cost Engineer Management Learning Skills. 10

Management is the easiest of the four courses in the estimator exam, and it is also the basis of the case course.

In fact, most of the courses of management are words, and in the process of learning, we must learn to grasp the key sentences of keywords; Among them, the engineering economics of Chapter 4 is something that many people will make mistakes, and it is recommended that you study the content of Chapter 4 well on the premise of learning the first few chapters; Chapter 6 has a lot of tables, in addition to understanding and memorizing the text content of the chapter, it is necessary to study the investment cash flow statement, the capital cash flow statement, and the cash flow change of the financial plan, because this part will involve cases, and when learning, you can combine the content of the case with the relevant content of management, so that you can learn the case while learning management.

Then it's time to do more questions, which are tools to test your understanding of knowledge points, study the real questions, and draw the real questions in the book, which will be of great help to your learning!

If necessary, you can enter the official website of Limi Cost for consultation.

1) Make a medium- and long-term (weekly, monthly) study plan for your own situation.

2) Regularly summarize and sort out knowledge, and exercise test ability through time-limited mock exams.

3) For the places where mistakes are often made, you can't let them go. For some weak links, there should be targeted "special training".

Set goals, study in order, establish a good mindset and seize the time to learn comprehensively.

1. Set goals

Whatever you do, you have to set a goal, it's what keeps you going. As we all know, the cost exam does have a clever spine to set the difficulty, and it is inevitable to lack confidence in the preparation for the exam. A student who has cleared the customs has passed four courses at a time in half a year, and his biggest feeling is:

As long as there is pay, there will be gain; As long as you keep working towards your goals, you will be able to succeed.

2. The learning sequence of the cost engineer's textbook

There are four subjects in the cost engineer exam, and the order of study is construction project cost management, construction project valuation, construction engineering technology and calculation of defects and wide destruction (civil engineering or installation), and project cost case analysis.

3. Establish a good attitude

Mindset is everything, so it's important to maintain a good mindset. The first-level cost engineer exam has a certain degree of difficulty, and it is inevitable that you will feel bored in the preparation for the exam, so you must learn to adjust your mentality and take learning as fun, so as to achieve twice the result with half the effort.

4. Seize the time and study comprehensively

Compared with World War II candidates, new candidates definitely don't have that much advantage, but it doesn't matter, just try to do your own thing. It's not too late to start reviewing and preparing for the exam from now on, and the first-level cost engineer exam review plan should be determined first, be strict with yourself, develop good study habits, and make yourself self-disciplined.

"Case Analysis of Construction Closed Endurance Process Cost" is a subjective question and is answered on the answer sheet.

The cost engineer qualification examination is divided into four subjects: "Construction Project Valuation", "Construction Project Cost Case Analysis", "Construction Project Cost Management" and "Construction Engineering Technology and Measurement". Among them, "Construction Engineering Technology and Metrology" is divided into two sub-majors: "civil engineering" and "installation", and candidates can choose one of them according to the actual work.

The subject test question of "Case Analysis of Construction Project Cost" is a subjective question, which is answered on the answer sheet; The remaining 3 subjects are objective questions and are answered on the answer sheet. The Measures for the Administration of Registered Cost Engineers were promulgated on December 11, 2006 and came into force on March 1, 2007. The original "Cost Engineer Registration Management Measures" (former Ministry of Construction No. 75 Ministerial Order) issued on January 21, 2000 has been repealed.

1. Basic Guidance.

1. Draw up a preparation plan.

3. Begin to master the textbooks of the first-level cost engineer examination, be familiar with the textbooks, and master the important and difficult points of the textbooks.

Second, grasp the difficulties.

1. Understand the syllabus of the exam, compare the old and new textbooks, read through the new textbooks twice, and summarize the important and difficult points in combination with the past questions.

2. Summarize and sort out knowledge points to form a knowledge system.

3. Strengthen and improve.

1. Master the test center systematically with textbooks, notes, and high-frequency test center collections.

2. Do questions chapter by chapter and section by section, analyze the idea of asking questions in combination with past past questions, and master the skills of doing questions.

3. Make full use of expert Q&A to strengthen the mastery of the test center and solve problems in a timely manner.

4. Pay attention to the mastery of the main knowledge of each subject, and check and fill in the gaps.

Fourth, the pre-test sprint.

1. First of all, adjust your mentality and prepare for the sprint before the exam.

2. Strengthen training, especially the case part.

Exam 100 is based on years of successful tutoring experience, starting from the actual needs of students, concluding the rules, key points and difficulties of the examination propositions, integrating advanced teaching concepts, and opening all-subject classes, single-subject classes, zero-based cramming classes, and all-subject intensive classes for different students, and candidates can choose according to their own working hours and learning needs.

Subject Preparation Tips:

1.The learning materials are mainly textbooks, and the past five years of past papers are also required.

2.Understand the body of knowledge of the textbook. Special attention should be paid to the knowledge points related to performance, use, characteristics and analogies in the textbook, and at the same time, the content of "convenient questions" should also be paid attention to.

3.The purpose of the practice and check of the real questions is to familiarize yourself with the test questions, understand the question mode, and experience the focus of the assessment. At the same time, establish a database of wrong questions, and look at the wrong questions repeatedly until you master them.

4.Review. The exam questions over the years are closely related to the textbooks, so the notes recorded in the textbooks should be read repeatedly (mainly referring to the content marked in the book when listening to the lectures), and the key points must be highlighted, the distinctive sentences must be grasped, and the comparison of knowledge points must be paid attention to; For the more difficult knowledge points, it is still necessary to understand the principle in order to fully grasp it.

5.Arrange the review rhythm reasonably according to your own time, most of the time is mainly based on textbook review, and do not approve of the sea of questions tactics. However, half a month before the exam, you should basically complete the actual training of the past five years, and the mock questions can be appropriately increased or decreased according to the personal review time.

Whether it is a real question or a mock question, the focus of checking the answers is to deepen the review of the knowledge points involved in the question stem and each option, and not just the question and the answer itself.

6.The questions in the wrong question bank should be done repeatedly, and the relevant knowledge points should be thoroughly grasped in combination with the textbook.

In the blink of an eye, it is already mid-June, and there are only 4 months left before the first-level cost engineer exam. In order to facilitate your preparation for the exam, the following is a collation of the learning methods and exam preparation experience of a first-level cost engineer, I hope it will be helpful to you.

First of all, we must understand the test subjects and test question types, know ourselves and know the enemy, in order to survive a hundred battles; Secondly, be targeted, follow the outline, in order to get twice the result with half the effort! Finally, to do the question, do the real question. It is easy to have a low eye and a high hand, and many subjects of first-level cost need to strengthen memory in doing questions.

1. Be clear about your learning objectives.

For example, some people's learning goal is to learn first-class cost engineer this year, which is too vague. It should be changed to 30 days from today to complete a subject in the exam.

For specific results, the score of a mock test in previous years should be more than 80%.

In the end, the clear goal is to complete one subject every 30 days, and the score of each mock test should be 80%.

2. Clarify the key points of learning.

Take the above goal as an example, I believe that each subject will have some memory weaknesses in an appropriate amount, and which chapter I have no impression of or have a shallow impression in my study, and I should review it in time after learning.

3. Implement the plan every day.

Personally, I feel that this is the most important part of the study plan. It's about whether you can stick with it. The easiest way – with division!

First of all, you need to determine the following things.

Count the time you can use to study every day, for example, the time I can spend studying every day is: 3 hours · Simply count your learning efficiency, whether you need to review to strengthen your memory.

Get an idea of the total amount of content you need to learn.

How many days are left until the target completion deadline?

That's two hours of study every day, and there is plenty of time to review and do problems.

Isn't it easy to break it down. The next thing you need is to grit your teeth and stick to it for a week, and then a month, and then the habit will naturally become diligent.

4. Optimization and adjustment.

The principle of difficulty adjustment and optimization is: it is too difficult to control the difficulty in the middle range, which will discourage enthusiasm and make it easy to give up. The difficulty is too small, there is no challenge, and it is easy to loosen.

Therefore, if you have any questions, you must find the teacher in the group to answer them in time. Don't let the problems in front of you become a frustration in the future.

In short, the above are some of my views and suggestions on how to make a study plan for the preparation of the first-level cost, the preparation of the first-level cost is not difficult, but it still requires our efforts, because only pay to gain, enter the review in advance, make reasonable use of the review time, prepare for the exam efficiently, and successfully get the first-level cost engineer certificate. Finally, I wish all the 2021 first-level cost candidates the title of the gold list!

1.The quantity and price of the engineering construction including the wide brother price are based on the drawings, basically 90% of the work negotiation process is calculated from the drawings, although there is a fixed total price contract, but the fixed total price is not a casual statement, but also will be calculated according to the drawings, will be determined. Therefore, drawing recognition is the most critical step in the project cost.

Regarding map recognition, I take civil engineering as an example, and the principles of other majors are the same. Civil Engineering Drawing:

2.Takeoff In terms of takeoff, from the perspective of mathematical algorithms, takeoff is the four operations of addition, subtraction, multiplication and division, calculating various volumes, areas, weights, lengths, numbers, etc. But before you can do the math, you have to know what to count and what not to count, you have to understand the calculation rules. .

3.Group price The cost will actually be classified as the price in the end, because there are many constructions of a construction project, and many times what we show to the outside world is a result, then the result is the cost, he is the best of the project, and the calculation is only to assist us to calculate a reasonable cost, not the ultimate goal. At present, there are three forms of group pricing.