What to do if the toilet is cracked and leaking, and how to deal with the water leakage in the toile

The toilet is used very frequently, and normal use may not cause any harm to the toilet, but if there is any work in the bathroom, it may cause damage to the toilet and cause cracks and leaks. Leaking water in the toilet not only wastes water, but also affects its lifespan. Let's take a look at what to do if the toilet has cracks and leaks, and what are the ways to deal with toilet tank failures?

What to do if the toilet has cracks and leaks 1. If the toilet has cracks and leaks, the first thing is to figure out which part of the toilet is damaged. The leakage of the toilet may be due to the misalignment of the sewage outlet and the toilet discharge diameter, the lack of flange, the loosening of the toilet and the ground caused by long-term use, and the quality of the toilet. If there is a leak at the connection between the toilet bowl and the sewer pipe, the toilet needs to be reinstalled and resealed.

Flushing toilet cracks can be repaired with ceramic glue, and the specific operation method is as follows:

Drain the water in the water storage tank in the sanitary room, wipe the gap clean, blow it with a hot air blower, and then air dry it naturally for a period of time to ensure that the gap is completely dry, and then squeeze the needle tube evenly along the gap to fill the gap (if the gap can be inserted, insert the gap and apply glue); If the gap is too small, you need to press it into the gap and press it into the gap several times to increase the amount of glue entering the gap and avoid continuing to repair the surface leakage later.

After filling, it must be used one day after it has been fully cured, during which time it must not get wet or soaked in water.

Extended Information: Causes of Cracked Ceramic Toilets.

1. If it is a small crack caused by uneven glazing during the glazing process, you can buy some glue to paste it; If the crack is too large, it is recommended to return it to the dealer immediately. Cracks can be caused by uneven heating during high-temperature combustion, or by sudden cooling or collision during transportation.

2. If there is a crack in the glaze of the toilet, it is generally not recommended to use it again, because the longer the use time, the larger the crack, so the hairy crack is a quality problem; If it is a brand issue, you can contact your local dealer to deal with it. If there is a crack on the back or bottom of the product, it is a normal phenomenon and can be repaired with plastic steel clay without affecting the function.

Three. Falling porcelain, the so-called porcelain that goes to the toilet is actually a layer of glaze that has been burned at high temperatures. A good glaze is fired at about 1000, which is resistant to high temperature and corrosion.

Except when struck with a hard object such as iron, porcelain does not fall off; Porcelain loss can only be due to the control of the glaze temperature or firing during the firing process.

If the crack of the toilet is not large, you can use stone glue to repair the crack, if it is too large, you can only replace the entire toilet before continuing to use.

There are few cracks in the toilet, and the leakage can not be solved by glue and other methods, and the cracks will get bigger and bigger after a long time, and the best way is to change to a new toilet to solve the problem fundamentally.

Water leakage in the toilet needs to check the cause of water leakage first, and then select the corresponding measures, as follows.

Check whether the flush switch of the toilet can be reset normally, the plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. It can be reset by repeating the switch a few times. It is also necessary to see whether the rubber gasket of the drain under the ball valve is aged, and if it is aged, it is recommended to replace it in time.

Check whether the spherical float of the water tank and the connection of the water inlet switch is loose, if the float is in place, then see if the switch is not closed, before the water is kept in, at this time, as long as the floating and the water valve switch connection is tightened, it is recommended to replace it immediately if the rubber ball valve is damaged or aging or the lifter is leaking.

If the toilet tank is leaking, it is basically a problem with the drain valve, you can look at the rubber plug of the lower tank outlet, whether there is damage or foreign body blockage that causes the toilet to leak. Also see if the water supply pipe in the lower tank is placed correctly.

Causes of toilet leakage

1. The quality of the toilet itself

In order to save costs, some manufacturers on the market will choose inferior materials in production. As a result, the water inlet valve and water inlet pipe crack during injection molding, which affects the sealing of its tara, so that the water in the water tank overflows into the toilet through the drain valve when used, resulting in water leakage.

2. The water tank accessories interfere with each mechanism during operation, resulting in water leakage

If the float and float rod of the water tank are lowered and the flap is reset, it will cause water leakage. In addition, the float rod is too long and too large, which produces large friction with the water tank wall, which affects the free lifting of the float and will also cause water leakage due to seal failure.

3. Small water tank accessories

Some friends like to miniaturize the toilet tank when they choose the toilet, so they will use the float buoyancy is not enough, especially when the tap water pressure is high, when the water does not pass the float, the water inlet valve can not be closed, resulting in the water constantly flowing into the water tank, from the overflow pipe into the toilet, resulting in water leakage.

4. The connections of the drain valve are not tightly sealed

If it is not a one-time drain valve, due to the poor sealing of the connection, the water will flow from the gap through the overflow pipe to the toilet under the action of water pressure, causing water leakage. There is also a lift-type inlet valve that can be changed freely, and if the sealing ring is not tightly matched with the pipe wall, water leakage can also occur.

Hello dear kiss The question you asked, here is the answer to you as follows: toilet leakage treatment method 1, if it is a specialty store, it is usually padded with a sealing ring inside, and the toilet is placed around the glass glue. 2. Prepare the tools:

Utility knife, (if you need to disassemble the angle valve) water tape, wrench, glass glue and glass glue gun. Toilet seals (need to be replaced if removed). If it is a decoration of the plumber car, it is usually made of white cement.

Prepared tools: slotted screwdriver (used to eliminate the original ruler white cement), white cement (when refilling, mix the water at the bottom of the toilet first).3. Then put the toilet seat up and stabilize it, and then use the mixed white cement to seal the toilet footsteps in a circle, and you can use it when it is dry.

Be careful not to let the white cement fall into the pipe, otherwise it will cause the pipe to be blocked. How to deal with toilet leakage 4, if the original toilet is installed, there is a fixed expansion bolt at the fixing hole of the base, the screw cap must be unscrewed, and then follow the above step operation, and then before the 4th step, the original ground expansion screw hole is filled with waterproof coating, and then the first step, and then re-tighten the screw cap.

When the baby is about 8 months old, parents can train the baby to use the toilet to urinate, which is good for the baby and allows the mother to relax. There may be some problems with the toilet after being used for a long time, such as leaking or being blocked, so how to deal with the leakage of the toilet? Of course, we must first find the cause of the leaking toilet.

1. Analysis of the causes of toilet leakage.

When encountering the problem of toilet leakage, we must carefully check the leakage location and causes, under normal circumstances, there are several major reasons for toilet leakage:

1. The toilet itself has cracks and leaks;

2. Water leakage at the connection between the toilet and the sewer pipe;

3. Water leakage caused by aging of internal parts of the water tank;

4. There is a problem with the water inlet group or outlet group of the toilet;

5. The drainage pipeline is not smooth, and the sewage flows backwards.

2. Check the cause of toilet leakage and solve it.

1. If the water leaks from the bottom of the toilet after flushing the toilet, and it is accompanied by a foul smell, then it can be judged that the sealing between the drain pipe at the bottom of the toilet and the toilet is not good enough, which requires re-sealing.

2. Open the water tank and see that the water tank is full and the water flows out of an overflow pipe, which means that the water inlet group is broken. This necessitates the repair or replacement of the inlet or outlet group.

3. In the case of unobstructed drainage, the dirt flows backwards, and the treatment of this situation is to determine whether the drain pipe is not unobstructed, if it is caused by unobstructed drainage, it is necessary to let the product seller reproduce the installation of the toilet, which is generally when the toilet is installed soon.

4. If there is water seepage on the surface of the toilet, it may be that there is a crack in the toilet itself. The detection method is very simple: first turn off the water inlet valve, then drain the water in the toilet tank, and then add red ink or ink to the residual water tank, wait for 30 minutes, and observe where the water seeps.

In this case, it is not advisable to repair the toilet, and replacing the toilet is the only way.

It is best for parents to take their baby to buy a toilet and let him choose his favorite color and style. In this way, the baby is more likely to accept the toilet. Train your baby not to be anxious when using the toilet, let your baby understand that poop is unwanted waste and should be thrown in the toilet or potty, and parents should use a relaxed tone to explain.

You can let him watch his mother go to the toilet, or take picture books and videos for toilet training, let him see the children in the toilet and the baby will imitate it by himself. When your baby has defecation in the toilet, you should encourage him to know that this is the right thing to do.

When the baby defecates, the mother should pay attention to the attitude, otherwise the baby will think that the mother does not like to clean up the aftermath, so that he is also disgusted with his own poop and is ashamed to defecate on the toilet.