What to do if the faucet has a small water flow, and what is the reason for the small water flow fro

At the very top of the faucet, there is a small thing called a "foamer". The inside of the foamer is a multi-layer mesh structure, which is easily clogged by sediment and scale. The faucet can be removed and the filter can be removed to check for impuritiesIf so, clean it and then install the filter back.

Or the water flow of all the faucets in the house is very small, so we can only find the property or we can install a booster pump at the outlet of the water meter at the home, and the problem can be solved after the water pressure is restored.

The reasons for the low flow of water from the faucet are none other than the following:

1. The water pressure is insufficient, and the water flow of all the faucets at home is very small, so we can only find the property or we can install a booster pump at the outlet of the water meter at home, and the problem can be solved after the water pressure is restored.

2. If the same inlet pipe is connected to multiple faucets and the water is discharged at the same time, then the other faucets can be turned off and left in one place.

3. The faucet filter is blocked, then, first close the main valve of the water meter outlet, and then, remove the faucet and take out the filter to check whether there are impurities, if so, clean it and then install the filter back.

Fourth, the water pipe is blocked, at this time we need to close the main valve of the water pipe, determine which section is blocked, and then take out the blockage in the pipeline.

Faucet maintenance is not prone to problems:

1. After using the faucet, the stains on the surface of the faucet need to be cleaned, especially the oil stains on the stains. The cleaning method is relatively simple, just open the faucet and rinse it with clean water, in addition, you can wax the surface of the faucet and wipe it clean with a soft cloth.

2. The exterior of the faucet is clean, and the inside of the pile should be cleaned. When the faucet is in use, it is found that the water is not very smooth, or it is bifurcated, it means that the aerator is blocked, and the faucet needs to be disassembled for hygienic cleaning.

3. When using the faucet, it is necessary to avoid scrubbing with substances such as iron wire balls, which can easily lead to scratches on the surface of the faucet and shorten the service life.

Many people in life have encountered the problem of small water output from hot and cold water faucets, which has brought a lot of inconvenience to life

Reason 1: There are a small amount of tiny solid impurities in the water pipe, especially the iron pipe, after a long period of use, the tiny solid impurities are accumulated in the faucet by the filter screen of the faucet, so that the faucet is partially blocked.

Solution: Unscrew the faucet outlet to check it, clean up the debris in the filter screen quickly, and then install it to test whether the water outlet is large.

Reason 2: Some high-rise users in high terrain, high floors or secondary water supply do not install secondary pressurized water pumps or the water pumps are damaged and cannot be used normally, and their own water pressure and water volume may become smaller during the peak period of water consumption.

Solution: You can contact the property to install or repair the secondary water supply pressurization facility.

Solution: Unscrew the faucet outlet to check it, clean up the debris in the filter screen quickly, and then install it to test whether the water outlet is large.

Reason 2: Some high-rise users in high terrain, high floors or secondary water supply do not install secondary pressurized water pumps or the water pumps are damaged and cannot be used normally, and their own water pressure and water volume may become smaller during the peak period of water consumption.

Solution: You can contact the property to install or repair the secondary water supply pressurization facility.

Kitchen. in the faucet.

The frequency of use is relatively high, almost dozens of times a day, in the use of the faucet.

In the process, some people feel very obviously that the water in the faucet at home is slowly getting smaller, even if it is turned on to the maximum, it still gets smaller. In the face of the problem of the faucet becoming smaller, people hope to solve it as soon as possible, after all, the faucet has been getting smaller and the water is slow, which will make people's lives very irritable. Let's take a look at the reasons why the kitchen faucet water is small.

First of all, you need to determine the reason, there are several reasons why the water output of the faucet becomes smaller after years of use:

1.Scale clogs faucet filters aerators;

2.Limescale clogs water pipes.

Pipes, which are generally iron water pipes, may have this problem;

3.The faucet is broken;

We need to troubleshoot step by step, find the causes in order of the causes, and implement solutions.

Secondly, repairs are carried out according to the reason judged:

1.Scale clogs faucet filters aerators;

For reason 1, you can use a pipe wrench or large-mouth pliers to remove the filter from the faucet aerator, check whether the faucet is still small in the absence of a filter, if the water volume is normal, it means that the filter is blocked, please go to a treasure to buy one and replace it, the following picture is the location of the filter and the appearance of the filter:

2.Scale clogs water pipes, which may be a problem for iron water pipes;

On the premise of excluding Cause 1, for Cause 2You can use a pipe wrench to remove the faucet and check whether the water output of the water pipe is still small without the faucet.

If the amount of water is normal, it means that the faucet is damaged, which is caused by reason 3, and you can go to a treasure to buy the faucet yourself and replace it. If the amount of water is abnormal, it means that the scale is blocking the water pipe, which is caused by cause 2, you can check the inflection point of the pipe one by one from the faucet end to see if there is a large amount of scale, find out the blocking point, and remove the scale to solve the problem.

What to do if the faucet is leaking

A leaky faucet will cause a lot of waste of resources and bring a lot of inconvenience to life. In fact, the structure of a faucet is very simple, and generally speaking, if a faucet leaks, it can be solved by replacing it with a gasket such as a shaft gasket or a triangular gasket inside the faucet.

If there is a leak at the faucet joint, the main reason is to tie the faucet part of the fixing screw.

of water-stopping tape.

Damage. Therefore, simply remove the faucet with a plier and re-roll the new water-stop tape where the screw is fixed.

If you find that the faucet at home has become smaller, you can analyze the reason, and then solve it in a targeted manner. There will also be other problems in the process of using the faucet at home, such as water leakage, etc., in the face of the faucet problem affecting daily use, you must solve it in time to avoid it The problem continues.

The reasons why the faucet has a small flow of water are water pressure problems, clogging problems, and aerator problems.

1. Water pressure problem

If the water in the faucet in the home is often smaller, accompanied by some noise, it may be caused by insufficient water pressure, which is more common in high-rise households. To solve this problem, you can seek the help of the property in the community, or install a booster pump at home, which can also effectively improve the problem of small water output.

2. Blockage problem

If the water quality is not clean, or there is some sand and gravel in the water, it is easy to cause the pipes or faucets to be blocked, which will make the water less available. In this case, we need to remove its spout and carefully check the strainer.

If there are large particles or stains on the filter screen, you need to put the filter screen in your hand and pat it gently, slowly let these impurities fall off, and then rinse with water.

3. Aerator problem

Usually, when cleaning the faucet, many friends simply clean the surface and do not clean the inside, but the amount of water in the Xunzi faucet becomes smaller, and it may also be caused by the internal aerator being blocked. If this is the case, take the faucet apart, remove the aerator, soak it in vinegar and clean it with a soft-bristled brush.

Precautions for the use of faucets:

Do not use too much force to open and close the faucet, just turn it gently, and do not use the handle as a handrail support or use. Try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating.

When the room temperature is lower than zero degrees Celsius, if you find that the faucet handle feels abnormal, you must use hot water to scald the bathroom product until the feel is normal, so as not to affect the service life of the faucet spool.

The faucet is an object that every household has, but when using it, it is inevitable that there will be some problems, and there will be a small flow of water in the faucet, so what should I do? There are also brands of faucets, but I don't know much about these, so let's introduce them to youWhat to do if the faucet has a small flowOne. What to do if the water dragon potato is made of small water flow.

1.When the faucet is blocked, the filter is clogged: some faucets are filled with filters to prevent sand from entering, we unscrew the faucet interface to see if something is clogging the filter.

2.The water pressure is too small: if you live on a high floor, you may experience a lack of water pressure, which will cause the water to not reach and there will be little water out.

3.There is also a small valve for water, so if someone closes the valve smaller, then there must be less water. There is also a reason for the early dismantling of the valve if there is a problem.

4.Then let's talk about the large amount of water used in the home: if there is a lot of water in multiple places at the same time, then the water output will be diverted, and the water output will definitely be reduced.

5.There is also a problem with the faucet: check whether the water in other places is normal, if it is normal, then there must be a problem with the faucet.

Two. What are the brands of faucets.

1.Let's start with the introduction. Founded in 1937, Moen Kitchen & Bath is a world-renowned professional manufacturer of high-end faucets, and has 5 production bases around the world, with service outlets all over the world.

Then Moen's series of products are complete, it adapts to the needs of various places, with its exquisite technology, perfect after-sales service, much preferred by users all over the world.

2.Next, founded in 1990, JOMOO Kitchen & Bath is the world's leading manufacturer of integrated bathrooms. There are also Jiumu has been selected into the ** green procurement list for many times, but it is also one of the most familiar kitchen and bathroom brands to consumers.

In addition, Jomu has won honors such as China's well-known trademark, China's environmental labeling products, and CCTV's annual brand.

3.Also, founded in 1873 Kohler, it is a world-famous manufacturer of sanitary products, but occupies a leading position in the field of faucets, bathtubs and other sanitary products. The company has won many honors such as the Star Value Contribution Award for Kitchen and Bathroom, and the Design Award for the Hannover International Forum (IF).

4.Founded in 1992 in Chaoyang, it is a high-tech enterprise that produces and sells sanitary products and accessories, the company has a very professional and high-quality scientific research team, has a number of international patents and hundreds of national patents, and the quality of its products are in line with the relevant domestic standards.

Problems with faucets are all encountered by us, but how to buy when purchasing, the above article is about what to do with the small flow of faucets and what are the brands of faucets.

If the faucet at home is too small, it will affect daily use. What should I do if the water flow of the faucet is small? PChouse will take you to find out.

The reasons for the low flow of water from the faucet are none other than the following:

First, the water pressure is insufficient, and the water flow of all the faucets in the home is very small, so we can only find the property or we can install the booster pump at the outlet of the water meter at home, and the problem can be solved after the water pressure is restored.

Second, if the same inlet pipe is connected to multiple faucets and the water is discharged at the same time, then the other faucets can be turned off and one place can be used.

Third, the faucet filter is blocked, then, first of all, close the main valve of the water meter outlet, and then, remove the faucet and take out the filter to check whether there are impurities, if so, clean it and then install the filter back.

Fourth, the water pipe is blocked, at this time we need to close the main valve of the water pipe, determine which section is blocked, and then take out the blockage in the pipeline.

<>1. Clogged faucet: remove the filter screen of the faucet for cleaning, and then insist on using it every day, and then install the filter screen of the faucet back after the water flow becomes larger; 2. Water pipe blockage: the installation of pipe joints is not careful, there are large residues left at the joints, it is recommended to ask professionals to reinstall pipe joints, the pipeline is aging, or a large number of deposits in the pipeline are not used for a long time, it is recommended that the pipeline is used frequently, and plastic pipes or gold, plastic composite pipes are used.

1. The faucet is blocked.

Cleaning method: Remove the filter screen of the faucet to clean, and then insist on using it every day, and then install the filter screen of the faucet back after the water flow becomes larger.

Principle: There are a small amount of tiny solid impurities in the water pipe, especially the iron pipe, after a long period of use, the tiny solid impurities are piled up in the faucet by the faucet filter, so that the faucet is partially blocked, after removing the faucet filter, the blockage will be slowly washed away by the water flow, and the water flow head will become smooth.

Note: A small amount of tiny solid impurities mainly comes from oxides on the inner wall of the pipeline or solid residues from the situation of pipeline maintenance, and the amount is very small and will not affect the health.

Second, the water pipe is blocked.

1. If you do not pay attention to the installation of the pipe joint, there is a large residue left at the joint, and it is recommended to ask a professional to reinstall the pipe joint.

2. If the pipeline is aging for a long time, or a large amount of sediment appears in the pipeline after not being used for a long time, it is recommended that the pipeline be used frequently, and plastic pipes or gold-plastic composite pipes should be used.