Why is it that the floor tiles should be sprinkled with water after a few days?

Now whether it is to decorate the house or the façade, the basic tiles are necessary, and can also quickly improve the high-end sense of the house, and the price is not expensive, it is a very common decoration, and there are floor tiles, such as common waterproof floor tiles, people will be confused about the floor tiles to be sprinkled after a few days, why is this? In fact, it is because we want to test the waterproofness of this floor tileThere is also whether it is pasted well, if there is no problem at this time, it can be used normally, and if there is a problem, it must be rectified in time, after all, waterproof is a very important thing, let's analyze it specifically.

First of all, it is a very simple example, for every family has a place to bathe, so here it must be a waterproof floor tile, this one takes a few days to get up, and then wait for the air to dry, then go to the test, directly sprinkle water and then see if there is no leakage, you can directly see whether there is no problem, this is also a must do, at this time there is a problem can be rectified in time, otherwise when the time comes to close the house, suddenly there will be a problem, very troublesome, not to mention the problem of contract compensation, It takes a lot of time just to get a new one, and it is estimated that it is difficult for the owner of the house to communicate.

So don't underestimate the fact that the floor tiles should be sprinkled after a few days, although it looks simple, but it is very necessary, many homeowners just don't understand this aspect, feel that it is okay to paste it, do not need to get these, it is a complete waste of time or deliberately delaying the construction period, this is their own problem, these things seem small, but they must be done.

Of course, I would like to remind everyone here that now to decorate the house, don't be greedy for cheap, especially for decorating water and electricity, many homeowners are looking for people outside to get it, and it didn't take long for a bunch of problems to appear, and the rectification is not easy to get.

This is actually done to have a very good curing, and to have a very good solidification and strengthening time. Because there may be some chemical reactions.

In this way, the floor tiles can be cut more tightly without any risk and warping can be prevented.

Because this keeps the floor tiles dense, it can make the floor tiles more compact and will not crack.

Generally, there is no need to sprinkle water after the floor tile is paved, and the sprinkling link should be carried out before the paving of the floor tile, and it is necessary to sprinkle some water on the dry base to make the ground warm and moist, and then the cement is poured into the wet base, which is smoothed and then pasted to the ground. The water sprinkled on the surface of the floor tiles cannot penetrate into the mortar layer under the floor tiles, and if it can, then the quality of the floor tiles is too poor, and it will penetrate the bottom in the future, and it will be even worse if the water leaks into the mortar layer along the gaps in the tiles.

All kinds of bricks know that the uranium surface is waterproof sprinkler to play a role, there is no need for that, the floor tiles are specially scraped with a layer of cement porridge-like slurry when laid, and half of the water can not evaporate when paved, so it is not needed at all after just laying a day"Wellness"。The sand ash used for paving the floor tiles is too dry or the cement ratio concentration is insufficient, and the water will be sprinkled on it before it is completely solidified after paving, and the water will seep from the gap in the floor tiles to the sand and ash cushion under the bottom, and the sand and ash that will be solidified in the future will shrink and sink after encountering water.

When we paste the floor tiles, it can be said that the dry paving method is adopted, and the dry paving method must first sprinkle the floor before pasting the floor tiles, especially in summer and autumn, and sometimes it is necessary to sprinkle water from time to time, because the temperature is high in summer and autumn, and the water evaporation on the ground is large. After the completion of the floor tile paving, it should be sprinkled and maintained in a timely manner, which is required in the building decoration quality acceptance specification. The word given in the specification is timely maintenance, so it is necessary to carry out sprinkling maintenance on the day after the paving of the floor tile.

The operation method must be decided according to the variety of tiles, all-porcelain and marble tiles almost do not absorb water, can be operated directly, glazed tiles imitate tiles, must be soaked with water before pasting, and can be pasted only after eating water. If it is said that it is the 800 * 800 large tiles in the living room, then the large tiles do not need to soak in water before paving, and there is no need to sprinkle water after the paving is completed one day.

The main reason is that the coagulant of the floor tiles has a short setting time in summer, so in order to slow down the setting time, it is necessary to sprinkle water.

In this way, it is necessary to ensure that there are some voids, or some collapse and fragmentation, so it is necessary to sprinkle water after a few days of tiling, which is also very convenient when installing.

Prevent the floor tiles from drying too quickly, causing the bricks to peel off from the cement, and sprinkle water to moisturize, which can slow down the drying speed of the floor tiles and be more conducive to bonding.

This is because the floor tiles need to be dried after they are pasted, and they need to be sprinkled with water after a few days, so you can see the flatness of the floor tiles and the degree of waterproofness.

Because the cement layer will shrink, if it is sprinkled, it will play a protective role to a certain extent, slowing down the shrinkage of the cement.

This is because the floor tiles are sprinkled with water to check the quality of the tiles after being pasted for a few days, and it is also to make the floor tiles stronger.

In this way, the adhesion of the floor tiles can be better, and there will be no stilts or damage, and it will also retain its value.

It is to prevent cracking, prevent falling off, avoid the phenomenon of hollowing of tiles, slow down the shrinkage of cement, and have a better effect.

In order to fix the floor tiles, so that the floor tiles do not move at will, the floor tiles can be fixed in one place without damaging the floor tiles.

Because in this way, the floor tiles can be tightened, and in this way, the floor tiles can be made stronger, and the service life can also be improved.

Doing this for the sake of its quality allows the tile to be more secure.

The purpose is to make it swell a little and see if it will crack, in fact, as long as the tiles are soaked in water before laying the floor tiles, there will be no problems.

It is because through the act of sprinkling water, the brick and cement can be more compatible, so that the tile is more firm, not easy to fall off, not easy to bulge.

Nowadays, the floor tile laying method adopted by the masters is generally dry paving method, the addition of water in this method is very small, can make the floor tile to achieve the purpose of fast drying after laying, this method is currently very popular, there are many benefits, has been widely used, but after paving a few days to sprinkle water on the surface of the floor tile, can play a role in the maintenance of the floor tile. Because after the tile is laid, the cement mortar under the floor tile needs a solidification process, the essence of the cement mortar is inseparable from the participation of water, which is a chemical reaction, only the participation of water, can be tightly attached to the sand, and the ground to form a whole, so only after sprinkling water can the tile and the ground fit more firmly. This avoids the problem of frequent cracking or loosening of floor tiles.

After the floor tiles are laid, be sure not to step on them immediately, which is likely to cause the floor tiles to loosen and deform, and generally have to wait for 48 hours before you can walk on them, and it will take about a week to completely dry. During the period, the surface can be sprinkled with water and cured, and it can be used normally until it is completely firm.

This is because after pasting, it is also necessary to look at the waterproof performance, and it can be seen by sprinkling water whether there is any falling, and if there is a drop, it is also necessary to reapply the latex paint.

This is also to prevent the floor tiles from bulging, if the floor tiles are not sprinkled after being pasted, it is particularly easy to cause dry cracks, and it is also very easy to cause damage to the floor tiles.

After paving the ordinary floor tiles first, there is no need to sprinkle water, and the sprinkler part should be carried out before paving the floor tiles, sprinkle water on the dry base layer to warm the ground, pour cement on the moist foundation to level it, and then stick it on the floor. Floor tiles are patted, and the floor tiles can be evenly glued to the floor. Unless you walk on or step on the freshly laid floor tiles, you are afraid of ruining the leveling effect because the tiles have just been laid.

After the floor tiles are pasted, the purpose of sprinkling water is to make the floor tiles better stick to the floor. It can speed up the protection of floor tiles. This is the case for veteran decorators.

This is because it prevents moisture, and it also has a particularly good maintenance that ensures moisture.

This can avoid some air when sticking the floor tiles, and it also avoids some bad phenomena after the floor tiles are pasted, in this case, you will choose to use more water.

The sprinkling is mainly to make the base of the floor tile better injected, but also to make the tile more conformable, but also to make the cement more solidified, mainly to protect the floor tile.

This keeps the tiles moist all the time, and they can better adsorb to the ground and won't warp.

Dear, I'm glad to answer for you: how long can the wall tiles be sprinkled Answer: Dear, hello, usually the tile paving can be watered after 2 days of ignition, but the weather is not required to be wet.

When using cement mortar to apply tiles, it usually starts to cure after 2 hours, but it takes 48 hours to walk on it, and it takes 4 to 5 days to water and cure it to ensure the strength of the cement mortar. 1. After the tile is paved, it is necessary to wait for 24 hours before sprinkling, and the floor tile can not be sprinkled immediately. Normally, the cement will start to set after two hours, after 24 hours you can start watering and curing, after 48 hours before you can walk around on it, and it will take 4 to 5 days to wait until it is completely dry.

2. If the floor tiles have been dried thoroughly, without any moisture, at this time, it is necessary to carry out sprinkling maintenance and sprinkling in advance, the most important thing is to ensure that the tiles have been in a wet state, if they are too dry, they are likely to cause the tiles to fall off in the later stage, or the phenomenon of tile hollowing.

Two days after the tiles are applied, the water can be sprinkled.

Under normal circumstances, cement mortar will begin to solidify after 2 hours, and you can walk around on it after 48 hours, but it takes days to completely dry, so after 24 hours, you can cover the sawdust at room temperature for 48 hours, and do not step on it during the curing period until it is stable.

To judge whether the floor tiles need to be sprinkled with water for maintenance, in fact, the method is very simple, we just look at the surface of the tiles to see if there is water.

If the surface of the floor tile has dried thoroughly and there is no moisture, then it is necessary to sprinkle water first. One of the most critical factors in sprinkling is the need to ensure that the tile surface is always wet.

Question: The master who helped me pave the tiles in the morning paved the tiles, and began to sprinkle and maintain them after work at 6 o'clock in the afternoon.

Answer: If you choose the dry paving method to lay tiles in your home, you also need to sprinkle water, if there is not enough water, it will affect the retention of moisture in the cement mortar behind the floor tiles, which is also a pity.

But although the sprinkling is good, don't go too far, we can decide the number of times to sprinkle according to different weather conditions, if it is a summer temperature is high, easy to evaporate environment, we can choose to sprinkle water once every two days, if it is winter we only need to sprinkle once every four days, we must be flexible. You must know these tips, and if necessary, you can also remind the decorator to show your professionalism.

If the water is sprinkled, the water will flow to the brick joints, dilute the cement concentration, affect the cement ash strength, affect the fastness of bricks and cement, and prolong the solidification time. How long is it appropriate to sprinkle water after pasting, generally two to three hours after pasting, when the cement has reached the initial setting state and the cement begins to dissipate heat, it is allowed to evenly sprinkle a small amount of water, which can prevent the floor tiles and cement from cracking, warping, bulging and other phenomena caused by heat dissipation during the cement solidification process. The purpose of sprinkling water is mainly to dissipate heat from the cement.

The number of sprinkling is small and diligent, and it is not possible to sprinkle a large amount of water at one time.

What is the purpose of sprinkling, there is no need to sprinkle water. The current floor tiles are generally fixed after 24 hours, but in order to level the ground, the floor tiles are left for a few days after they are laid and then cleaned.

There is no need to sprinkle water after the floor tiles are laid.

The sprinkling link should be carried out before paving the floor tiles, and it is necessary to sprinkle some water on the dry base layer to make the ground moist and easy to handle, and then pour cement into the wet base, grind it flat, and then apply the stirred cement on the back of the floor tiles;

Then paste it on the ground, after paving the bricks, carry out the next tapping, so that the floor tiles can be evenly and evenly attached to the ground, and finally as long as you avoid walking or stepping on the newly laid bricks, because the newly laid floor tiles are afraid of destroying its smooth effect.

Paving floor tiles in April, after paving can be maintained without sprinkling, but it is not advisable to walk around and step on the brick surface before drying. Before paving, the dry base layer needs to be sprinkled with water and moistened.

Summary. It can be maintained after one day, and it will be good after three days. Generally, in the process of high temperature in summer or in the process of floor heating in winter, the floor tiles will be paved, which will cause the moisture in the cement mortar to volatilize too quickly, thereby shortening its solidification cycle and affecting its bonding effectiveness, so it needs to be sprinkled and cured after paving.

In addition to the time period, generally speaking, there is no need to do sprinkling and wetting treatment. However, after the floor tiles are paved, it is not advisable to walk and step on the brick surface before the initial solidification (at least 24 hours after the tile is paved). Generally, in the process of high temperature in summer or in the process of floor heating in winter, the floor tiles will be paved, which will cause the moisture in the cement mortar to volatilize too quickly, thereby shortening its solidification cycle and affecting its bonding effectiveness, so it needs to be sprinkled and cured after paving.

In addition to the time period, generally speaking, there is no need to do sprinkling and wetting treatment. However, after the floor tiles are paved, it is not advisable to walk and step on the brick surface before the initial solidification (at least 24 hours after the tile is paved). The tiles are soaked before pasting, and there is no need to water them after pasting.

Hello, I am Fan Que Ask's co-teacher Tianyu Culture Media Emotional Assistant No. 003, <>

We have been in this industry for 8 years and are happy to serve you. <>

Please wait for 2 minutes <> answer

It can be maintained after one day, and it will be good after three days. Generally, in the process of high temperature in summer or in the process of floor heating in winter, the floor tiles will be paved, which will cause the moisture in the cement mortar to volatilize too quickly, thereby shortening its solidification cycle and affecting its bonding effectiveness. In addition to the time period, generally speaking, there is no need to do sprinkling and wetting treatment.

However, after the floor tile is paved, it is not advisable to walk and step on the brick surface before the initial solidification (at least within 24 hours after the tile is paved). Generally, in the process of high temperature in summer or in the process of floor heating in winter, the floor tiles will be paved, which will cause the moisture in the cement mortar to volatilize too quickly, thereby shortening its solidification cycle and affecting its bonding effectiveness, so it needs to be sprinkled and cured after paving. In addition to the time period, generally speaking, there is no need to do sprinkling and wetting treatment.

However, after the floor tiles are paved, it is not advisable to walk and step on the brick surface before the initial solidification (within 24 hours after the tile is paved). The tiles are soaked before pasting, and there is no need to water them after pasting.