-
According to the netizen method: prepare 6 red envelopes.
The first step is to take a red envelope, align the two short sides, and fold it in half from the middle.
The second step is to fold it and open it with the words facing outward. Align the top and bottom long sides, fold them in half from the middle, and stack a crossed cross-shaped middle line in the middle of the rectangle.
The third step is to fold the four corners of the red envelope towards the middle line to fold out the four corners. Use the same method to fold the remaining 5 red envelopes like this.
The fourth step is to take two red envelopes, hold the two adjacent corners above the two red envelopes and fix them with a stapler, and then fix the two lower corners. In the same way, two groups are used to make three groups. Fix the lantern with a stapler in the order of adjacency, and the basic appearance of the lantern is completed.
The fifth step is to use a punch to punch a hole on each side of the opposite side of the red envelope, and make two holes symmetrically at the bottom, thread the lantern spike into it, tie a knot in the middle, and the lantern is all made.
-
One: Prepare the materials for making the lantern.
Today we are going to learn how to make lanterns out of paper cups. Start by preparing two paper cups, a pair of scissors, and some double-sided tape and scotch tape. Once you're ready, it's time to start making your handmade lanterns.
Two: Use scissors to cut the cup.
First pick up a paper cup, then use scissors to cut off the rim of the cup, then put the cup upright, and use scissors to cut the cup into strips as the main body of the lantern, but do not cut to the bottom, the bottom of the cup needs to be retained. After cutting, take out another cup and cut the bottom of this cup with scissors.
Three: Glue the cup with double-sided tape.
Glue the opening of the main body of the cut lantern and the bottom of the freshly cut cup together with double-sided tape, and a lantern is roughly completed. Then use a stick or paper stick to make the handle of the lantern, and you can also dye the lantern in your favorite color, such as red, so that a lantern is complete.
-
The practice of the red envelope lantern is as follows:
You need to prepare a few new red envelopes, and the number depends on the size of the lantern you make. First, fold the four corners of the red envelope towards the midline, and note that the folded parts of the four corners should be the same. Remember to take out two of the red packets and punch a hole in each with a hole punch at the top.
Assemble the punched red envelope and the other two red envelopes into a cross shape, and use a stapler to nail the four corners firmly.
Then pass the two ends of the red rope through the hole, tie the dead knot, and make the rope of the lantern. Then use four red envelopes and nail them in a circle along the corners to make the upper part of the lantern. And make the lower half of the lantern and wear a Chinese knot as a decoration.
Assemble the upper and lower parts together and use a stapler to nail them along the corners. Arrange the edges and stitches, hang the thread at the top end on the hook, and the red envelope lantern is done.
Precautions for hanging lanterns:
1. The red lantern must be symmetrical, and the height and distance should be moderate.
2. The New Year's lanterns are hung in the south and not in the north. Many people hang lanterns because they are beautiful to hang there, but in fact, the direction of hanging lanterns is also particular. New Year's lanterns are hung in the south and not in the north.
3. The red lanterns hung must be even numbered, whether they are hung on both sides of the gate or on the balcony, they must be counted as even numbers. Hanging lanterns must be in pairs, and Chinese like even numbers.
-
The steps to make a red envelope lantern are as follows:Material tools: 12 red packets, stapler, scissors, rope.
1. Fold the red envelope well.
2. Fold the middle line in half along the long side and the short side respectively.
3. Fold out the two corners facing up and the two corners facing down.
4. As in steps 2-4, prepare 12 red packets. Then use a stapler to staple the upwards corners together.
5. Connect the 6 red packets together.
6. Bend the two corners of the same red envelope inward and staple them together, and the upper part of the lantern is completed.
7. In the same way, use another 6 red packets to make the lower half of the lantern. When both parts are done, staple the two corners that are folded down together. The two corners of the same red packet should be one inside and one outside, and then ordered.
8. The main body of the lantern is completed.
9. If you don't have a ready-made lantern spike, you can use a red envelope to seal yourself and make it. Fold it in half along the long side first.
10. Use scissors to cut several knives equidistantly, but do not cut them.
11. After that, fold diagonally and set it up.
12. Thread it with a thread and hang it on the lantern.
-
The manual method of making red envelope lanterns is as follows:Materials required: 12 red envelopes, 6 bead flowers, one hanging tassel, and 40 cm long red silk thread.
Specific method: 1. Start from the middle of the paper and fold two corners to both sides.
2. Align the upper part and clamp it with staples.
3. Wrap the finished red envelope paper in a circle, and then hold it up to make it three-dimensional.
4. Follow the above steps to make two servings for later use.
5. Finally, the two and a half lanterns made in the fourth step are spliced together and stapled together with a stapler.
Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. After thousands of years of development, lanterns have developed different regional styles, each with a unique artistic expression. Every year on the fifteenth day of the first lunar month, before and after the Lantern Festival, people hang up red lanterns that symbolize the meaning of the group to burn the circle to create a festive atmosphere.
The lantern combines painting, paper cutting, paper tie, piercing and other crafts, and is closely related to the life of the Chinese.
The lantern has become a symbol of Chinese festivities. Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the kind:
Palace lanterns, yarn lanterns, chandeliers and so on. In terms of modeling, there are characters, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy.
-
The simple way to make a lantern handicraft using a red envelope is as follows:
Tools: stapler, scissors, 13 red packets, 1 red string.
2. Fold the other 11 pieces of the same size in the same way.
3. Align 2 of the corners, staple them with a stapler, and fix them.
4. Repeat the above steps, four 1 groups are ordered, and 8 red envelopes have been booked at this time.
5. Put the remaining 4 red envelopes with good corners and book them.
<>8. Roll up, wrap the red rope, and use a stapler to bind.
9. Thread the red-edged cord through the lantern and you're done.
This year's Lantern Festival lanterns are really a feast for the eyes, and I found many ingenious lanterns carefully, and I can't help but be impressed by the wisdom of the masses! >>>More
1. First of all, prepare a paper roll that is not used and a piece of cardboard paper that is the same length as the paper roll, and the length of the cardboard can wrap the paper roll. >>>More
There are many kinds of handmade lanterns, of course, here we will not talk about those paper-cut art things, from my personal experience to talk about the simple square lantern practice, I was born in rural Shandong, remember when I was a child, we celebrated the Lantern Festival every year, that night there will be a habit of eating Lantern Festival, carrying lanterns. 8 The economy in the 90s was not very good, so every time I made lanterns with my father, I will briefly talk about our rectangular lantern practice: >>>More
Method steps.
First of all, we have to take out the materials we have prepared, 48 red envelopes, as well as scissors and glue sticks, and when we are ready, we can start. >>>More
The first step is to align the bottom of the six red packets, and use scissors to cut the top of the six red packets into six red packets of the same size >>>More