How to wiring safely and beautifully when decorating?

Updated on home 2024-07-25
15 answers
  1. Anonymous users2024-02-13

    When wiring, you should choose to decorate it with aluminum foil, and when you choose, you should still use different colors to divide, you must choose some fixed glue to fix, and then choose the way of dislocation, so that it is particularly safe and good-looking.

  2. Anonymous users2024-02-12

    Try not to go to wiring, because when decorating the house, wiring, it will make the room very crowded, if you want parts, try to choose something simple, and you should get the outline of the room out.

  3. Anonymous users2024-02-11

    First of all, it is necessary to be regular, and special standards are also needed, and you can also choose the way of ground wiring, and you must pay attention to safety and durability, and you can choose to do dark lines.

  4. Anonymous users2024-02-10

    By going to the top for wiring, it will look very neat and effective, and it is relatively safe.

  5. Anonymous users2024-02-09

    Preamble: When the family is decorating, the layout of the circuit and waterway is very important, they are hidden projects, so they must be designed reasonably, if it is inconvenient to use in the later stage, it is also very troublesome to rework. Standardized wiring and construction can make the owner's life more comfortable in the future.

    When the layout is to be located according to the use of the line, after the positioning is completed, and then according to the direction of the circuit to open the wiring groove, the line groove is also very particular, to be horizontal and vertical, the standard practice is to open the horizontal groove as little as possible, which will affect the bearing capacity of the wall, and the depth of the groove should also be consistent, and the general requirement is about 10 mm diameter. There are also two options for cold bent pipe and PVC pipe, cold bent pipe can be bent, and it is the best choice for wiring without breaking, and the corner is also a curved line, which can be replaced at any time without opening the wall. <>

    In order to prevent the signal from being interfered with, the spacing between strong and weak currents should be kept at 500 mm, if the construction does not meet this standard, only the strong and weak currents can be shielded, and the strong and weak currents can not be placed in the same tube. Socket panels such as **TV in the same room should be set at the same height, and the horizontal spacing should not be less than the distance of a cassette. To ensure safety by placing the connector of the piping line in the junction box, seal the end of the wire with adhesive tape.

    When the length of the wiring is more than 15 meters, or there are three bends in the middle, a junction box needs to be installed, so that when disassembling and assembling the wires, it will be impossible to pass the conduit through the middle because of too many bends. <>

    The current of the distribution box should be set at about 30 milliamperes, and the leakage protector should be set up, and the fractional road control should be opened, which is to protect the current of the circuit breaker when it is working and the terminal electrical appliances can play a maximum working current match. There are no special requirements, the socket installation is generally about 30 cm above the ground, and the switch socket faces the panel, which is generally the zero line on the left and the live wire on the right. When decorating your home, you must pay attention to the fact that the connected wires should be wrapped with insulating tape.

  6. Anonymous users2024-02-08

    To hide all the wires and water lines, you should also pay attention to safety, you should also seek the help of a professional electrician, and you should control the circuit by switching it on/off.

  7. Anonymous users2024-02-07

    At the beginning of the renovation, I had to start wiring, and I had the workers bury all the wiring in the wall so that the room would be tidy.

  8. Anonymous users2024-02-06

    When decorating, first go to check, the wires in the distribution box are all sorted out, then bundled together, and then install the socket separately, so that you can do it.

  9. Anonymous users2024-02-05

    Be sure to unify the color of the wire, choose the right resistance, set a reasonable socket, and choose a new structure, which will be more stable.

  10. Anonymous users2024-02-04

    Wiring mainly depends on your own use to consider, weak class of network cable and ** line remember not to go with the socket class of strong electricity, so there will be interference, it is recommended that each room when wiring fully consider the location of the socket, it is not necessarily more, the key is useful, so as not to cause unnecessary waste, the kitchen wire is best not to change, water and natural gas should not be changed privately, one is inconvenient for future maintenance, and another reason is that if the water and air pipe are damaged when tiling, it will become quite troublesome.

    Like the bathroom is reserved for the wires, don't be fooled by the decoration company, saying that you need to re-bury the wires, only need a professional electrician will use the simplest way to complete the threading, which will save about 1000 yuan or so.

  11. Anonymous users2024-02-03

    The wire area cannot exceed 40% of the conduit

  12. Anonymous users2024-02-02

    Introduction: If you want to decorate the wiring better, you should choose a good-looking wiring for decoration.

  13. Anonymous users2024-02-01

    Specific principles of wiring:

    First: the spacing between strong and weak currents should be 750px-1250px.

    Second: strong and weak electricity cannot be worn in the same tube.

    Third: the total cross-sectional area of the conductor in the pipe should be less than 40% of the cross-sectional area of the protective pipe, such as 20 pipes with a maximum of 4 square wires.

    Fourth: use the whole pipe as much as possible for long-distance line pipes.

    Fifth: If the line pipe needs to be connected, it should be connected with a joint, and the joint and pipe should be glued well.

    Sixth: If there is a line pipe on the ground, it should be protected immediately to prevent it from cracking and affecting future maintenance.

    Seventh: when the wiring length is more than 15m or there are 3 bends in the middle, a junction box should be installed in the middle, because when disassembling and assembling the wire, it is too long or bent too much, and the wire cannot pass from the conduit.

    Eighth: Under normal circumstances, the wires should be more than 1000px away from the gas pipeline.

    Ninth: Under normal circumstances, the installation of air conditioning sockets should be more than 2m above the ground.

    Tenth: Under the premise of no special requirements, the socket installation should be 750px height above the ground.

    Eleven: The switch and socket face the panel, and the live wire switch and socket on the left side should be the neutral line on the left and the right side of the live wire should be facing the panel, and the live wire on the left side should be on the left side and the right side of the live wire.

    Twelve: In home decoration, wires can only be connected together.

    Thirteen: the joint adopts the press wiring method, which must be strong and firm.

    Fourteen: The connected wire should be wrapped with insulating tape immediately.

    Fifteen: After determining the color of the live wire, neutral wire, and ground wire, as well as the wires and wire pipes with different functions, the colors can not be confused.

    Sixteen: lighting, sockets, air conditioners, water heaters and other circuits in different areas of the home should be separately grouped and wiring, once which part needs to be off-duty maintenance, it will not affect the normal use of other electrical appliances.

    Seventeen: After the circuit is completed, leave the circuit layout diagram to facilitate future maintenance, wall trimming or nailing on the wall to prevent the wire from being damaged.

    Home wiring considerations.

    1. Standardized construction can ensure the use of weak electricity in home decoration now and in the future, and will not destroy the decoration because of new applications in the future;

    2. Unified control and management are adopted, and it is very convenient to use, manage, maintain and expand in daily life in the future;

    3. The system compatibility is very good, and the network wiring in the system can not only support the network, but also support the security alarm, and the scalability is strong;

    4. Plug and play, as long as there are new home appliances and information equipment, you can only plug in the corresponding interface, and the corresponding jumper in the information access box can form a path.

  14. Anonymous users2024-01-31

    It is all aluminum wire, which should be dismantled and replaced with plastic copper wire; For the whole line, the number of branch circuits should not be too small, generally should be one way for lights, two for air conditioners, and three to four for sockets. The advantage of this is that once a certain one.

    When there is a short circuit or other problems in the line, the scope of the power outage is small and will not affect the normal operation of several other roads.

    The second is buried wire and wiring: the wiring is generally used in the wall slotted buried wire method. When wiring, it should be laid with a dark pipe, and the wire should not have joints and kinks in the pipe, and the wire should not be buried directly into the plastering layer.

    Because this is not only not conducive to the replacement of the line in the future, it is also unsafe. In the wiring process, it is necessary to follow the principle of "live wire into the switch, zero wire into the lamp head"; The socket wiring should be "left zero and right fire, grounding on the top"; In progress.

    When connecting the wires, you can not simply wrap the two wires together with insulating tape, but must brush the tin at the knot and press it with pliers, so as to avoid the aging of the line due to uneven overpower.

    In addition, the number of sockets should be carefully considered when wiring, if the number of sockets is small, the user has to pull the wires and connect the socket board, resulting in unsafe hidden dangers, so the number of sockets should be considered in advance, and the use of the wiring board should be minimized in the future.

  15. Anonymous users2024-01-30

    In the construction of houses, water and electricity wiring is a science, and its wiring can not be done at will, but needs to pay attention to certain wiring principles. Decoration wiring belongs to the concealment of home decoration engineering, once the laying is completed, it is difficult to change, so we need to follow its wiring principles when wiring. So how to wire home decoration?

    What principles do you need to master for home decoration wiring? Let's take these questions and learn how to wire home decoration!

    How to wire for home renovation.

    1. Integrated wiring.

    Before we wiring, we should take into account the overall design, need to consider the layout of each socket, the placement of various household appliances, and we also need to comprehensively consider the layout of ** line, cable TV cable, power line and twisted pair. **The wire and power line should not be too close to the twisted pair to avoid radio interference to the twisted pair; However, the distance between them should not be too far, relatively speaking, the position can be kept at about 20cm.

    2. Simple design.

    Although there are more electrical appliances used in the home, the number of information points will be less than that of tooling, so it is more convenient to manage, so there is no need to use patch panels for home wiring. One end of the twisted pair cable is connected to the information socket, and the other end can be directly connected to the hub device, which can effectively save decoration expenses and reduce the difficulty of management.

    3. Pay attention to aesthetics.

    When we wiring, we not only need to follow its wiring principles and keep a proper distance, but we also need to pay attention to its aesthetics, so that they can not only not interfere with each other, but also achieve neat and orderly. Wiring construction should be carried out at the same time as the house decoration, it is recommended that we try to bury the cable pipe trough under the floor or tile and other decorative plates, and the information socket should also be embedded type, and the bottom box should be buried in the wall, so as not to affect the aesthetics of the room.

    Precautions for decoration wiring.

    For the wiring of the cooking area and bathroom, it is recommended that you do not lay strong wires on the ground, but should wiring on the wall or top as much as possible, because the kitchen and bathroom space consumes a lot of water and the floor is more humid. The kitchen and bathroom decoration is also very strict on the waterproof of the ground, if the ground slotted wiring, it will affect the waterproof use function of the whole room. The distance between the two must be greater than 150mm, so as not to produce radio wave interference and affect our normal electricity consumption.

    The above is the relevant content of how to wiring the home decoration explained by Rilong decoration and everyone, I hope to give you some reference! For more related content, you can pay attention to Rilong decoration information, and more exciting content will be presented in the future!

Related questions
10 answers2024-07-25

Lighting is very important in the decoration design of the attic, only sufficient bright light, can make the whole interior space not appear so dark, so as to bring people a sense of imprinting, if the natural light is not enough, we can add light in the room to make up, for those lofts with higher floors, it is best to use chandeliers full of design, if the floor of the attic is low, then you can use wall lamps or floor lamps.

19 answers2024-07-25

A small duplex house can be designed with a spiral staircase, which is both beautiful and functional. And in the small duplex home, the staircase is also a very important product. It not only has the role of connecting the previous and the next, but also brings a very strong functionality to people, which can be regarded as a kind of artistic embodiment. >>>More

13 answers2024-07-25

Manual Seat Adjustment Method:

1. Adjust the front and rear positions of the seats. Hold the steering wheel with your right hand and control the seat adjustment handle with your left hand, sliding back and forth to a position where you can easily press the clutch and brake pedals all the way down. >>>More

14 answers2024-07-25

In home decoration, for some owners who do not have much money, they hope to use the least amount of money to create the home decoration of their dreams, but even if they can't install the effect of high-end, they can also decorate a petty bourgeoisie-like atmosphere. Then there are several ways to save money on living room decoration design for everyone. >>>More

17 answers2024-07-25

Fingers should be straight and tight, don't blindly want to turn, just enter.