In winter, the windows of the old house are leaking, are there any warm artifacts to recommend?

Window leakage and warmth, there is nothing to do with the two, window leakage, you can use plastic film on the window, or tape on it, as for the heating artifact, this depends on where you are, some places can use a small sun, and some places have a heater, this is not the same.

Four tricks to solve the problem of window leakage is the problem of old-fashioned window window layout sandwich, plastic steel window layer plastic, window gap treatment, and window installation residual problems.

1. The old-fashioned windows and windows are arranged with a mezzanine.

For double-walled old-fashioned windows, the best thing to do is to fill the window-to-window intervals with sawdust, which can solve the moisture of the window and also block the strongest cold air at the bottom of the window. For the window cracks of such windows, they can be sealed with kraft paper and paste to ensure that the airtight temperature is extremely high.

2. Plastic steel windows are layered with plastic.

The plastic steel window has been used for a long time, and it is easy to breathe, and the gap at the interface is too large to be bonded. The best way is to paste a sponge around the window, and then cover the whole window with plastic, which absorbs heat and is airtight, and the temperature is well maintained.

3. Window gap treatment.

If there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, then fill the gap with high-grade cement river sand, and finally do the finishing repair; Air leakage between the window sash and the window frame can be considered to add sealing strips, felt strips, etc. If the gap is large, it is better to add a layer of plastic steel window to the original window.

4. Problems left over from the installation of windows.

First of all, it is necessary to see that the problem left by the worker installation is not in place or the product itself is a problem, the reason for the product should be found a dealer, or a manufacturer, if the worker has a little problem during the installation, it can be disassembled and reinstalled.

In winter, the following measures can be taken for window leakage, such as: pasting with tape, changing glass, hanging curtains, pasting with kraft paper, etc., as follows:

1. Paste with adhesive tape.

If the gap in the window is not very large, you can use adhesive tape to glue the gap in the window to prevent wind from leaking through the gap.

2. Change the glass.

If the glass is not very expensive, and the gap in the glass is relatively large, you can choose to replace it with a new glass.

3. Paste it with kraft paper.

If it is some old-fashioned glass, you can use kraft paper to paste the gaps in the window to prevent the glass from leaking, it is better to buy kraft paper in large circles.

4. Hang curtains.

In winter, you can hang thick curtains on the glass, which will warm the temperature in the room and also prevent the windows from leaking.

Extended Information: Here's how:

Material tools: sealing strips, scissors.

1. Determine the location of air leakage, where the gap is taken as an example of the position of aluminum alloy edging and window frame edge;

Top 10 Warm Artifacts in Winter: Ginger Soup Ginger Tea, Warm Baby, Hot Water Bottle, Electric Blanket, Electric Fan, Heating Table Mat, Uninterrupted Heating Cup, Heating Body Lotion, Lazy Quilt, Hand Warmer.

The window leakage of the old house can be intervened with windows and seals, which can effectively plug the loopholes between the cracks of the windows and prevent air leakage.

In winter, the windows of the old house leak, the first thing to solve is to solve the problem of air leakage, I think it is better to choose the air conditioner, because the warm artifact is also very power-consuming.

You can buy a small sun or buy an electric blanket, but if you can't do it, you can replace the window with one, so that it does not leak and is warmer.

In winter, old houses, windows leaking. Ordinary thermal artifacts are useless. Air conditioning is recommended as the only way to have a warm winter.

If it's summer, or in winter, the old house is leaking from the window, cover it with plastic sheeting, it's better after the plastic is sprouted, and get a little more inside, it's the heater.

Electric blankets, stoves, baby warmers, or even some window repairs.

In winter, the windows of the old house leak, so the windows of the house should be pasted with paper or closed with glass. The room can be heated by air conditioning or electric heating.

In winter, the window of the old house leaks, and the window strip should be replaced again in advance, so that the strip can play an effective role in heat preservation, and if you want to keep warm, you can directly paste a layer of plastic film inside.

In winter, old houses, windows leaking. Then first block the windows, and then install an air conditioner, so that you can warm up for the winter.

Buy a window wind seal artifact from**. It's like plastic film. I can block the wind. The temperature can be increased by about three degrees.

Buy a piece of plastic sheeting, paste the window as a whole, it is very insulated, pay attention to be sure to stick it well, otherwise there will be a noise of wind blowing plastic sheeting.

In winter, if the windows of the old house leak, you can choose to cover a layer of plastic tape on the outside of the window, which can greatly reduce the degree of air leakage!

There's a hot water bottle. Including those that warm their feet, as well as small suns and electric hot wind.

Electrified heating, baby warming, electric blankets, it is recommended that the windows should be repaired.

In autumn and winter, the indoor temperature will be significantly higher than the outdoor temperature, and the poorly sealed windows will lose the indoor heat source to the outside, resulting in heat loss.

Causes of window leakage.

Normally, there are two main reasons for window ventilation: one is the aging of the sealing strip at the connection between the glass and the frame of the window, the accumulation of dust and increasing wear and tear in the process of long-term use, and the ability to block wind and sand is reduced. Another possibility is that the wall is loose, and the seal between the window frame and the wall is reduced, causing wind to penetrate through the cracks.

For the above two cases, the solution is also different.

Heater air conditioner, radiator, baby warmer, electric hot water bottle,

Repair the wall, otherwise the house will still leak in heavy rain, you can choose to install an air conditioner, and the electricity will not be used much, and the whole house will become warm.

Autumn pants, down jackets, baby warmers, such as heated table mats, foot warmers, hand warmers, cold masks, etc.