The newly bought commercial house is not paved with underfloor heating

Hello, is there a wooden floor, the geothermal heat is all under the wooden floor.

It is recommended not to re-install underfloor heating for new house decoration.

The reasons are: 1. The heating of the original design of the house is calculated by hydraulic and thermal calculations, and the purpose of hydraulic calculation is to do a good job in the hydraulic balance of the whole building, to ensure that the users of the whole building can reasonably distribute the flow of heating circulating water, and to ensure the uniform heating of the whole building. Many people modify the heating themselves, and adding pipes may destroy the hydraulic balance of the original design, resulting in some users not heating hot.

2. The original design heating of the house should be thermally calculated, the floor heating heat dissipation area should be sufficient, and the indoor temperature should be guaranteed.

3. Dismantling the original floor heating and relaying the floor heating pipes will greatly increase the decoration costs.

4. The heating of the house is warranted, and the developer is responsible for the leakage, water failure or the indoor temperature is not high enough during the warranty period.

Based on the above, their own repaving of floor heating must be to increase the pipeline, the indoor temperature must be satisfied, but it also increases the many problems mentioned above, weighing the pros and cons, it is recommended not to change the original supporting heating as well.

Is it necessary to install a set of wall-mounted radiators in the new house that has been paved with floor heating.

The advantages of floor heating are still greater than that of heating, and the current commercial housing is basically geothermal;

Geothermal heat does not take up space, and the heat dissipation is relatively good, which is generally liked by people;

If you're worried about the hidden dangers of geothermal energy, it's really not clear, because the geothermal materials used in the original building won't be too good. Whether the construction is done according to the standard is not very clear, our supervising owners have found that there are joints on the geothermal pipes, which is not allowed, this is a hidden danger, once the joint leaks will affect the downstairs neighbors.

As long as the construction is carried out according to the specifications, there should be no problem!

Decide according to the quality of your home.

For the newly bought commercial house you said is not laid with floor heating, you can consult the developer whether there is no heating, or just provide hot water into the household, or forget to do floor heating, if only to provide a hot water source, you can find a professional floor heating construction personnel to design and construct for you, but if the developer does not provide a hot water source, you can only buy a wall-hung boiler to increase floor heating.

Then you can find a decoration construction team or go to the labor market, find some ordinary floor heating workers, according to your own preferences not floor heating can be, most of the current commercial housing in order to save costs does not include floor heating in it.

It's also good to be able to make up for it. To be honest, the quality of the floor heating used in the project is definitely not as good as the self-installation, and there are many problems.

You can lay it yourself, or you can install heating.

Summary. Dear, hello, I am happy to answer for you: I bought a commercial house, one of which is not paved with floor heating, how to solve the problemA:

It depends on whether there is an agreement in the contract between you and the developer, if it is written, the house is heated but there is no floor heating, you can claim that the other party is in breach of contract and ask for rectification or compensation. Floor heating is becoming more and more common in our daily life, but for some friends who have not installed floor heating, don't worry too much, you can use the following methods to heat: first.

First, the disadvantage of making a surface-mounted radiator is that you can see the gusset plate of the pipe, and you need to open a hole in the wall; Clause.

Second, the purchase of electric radiators, directly installed can be used, the disadvantage is that the power load must be enough (the power of the electric radiator is generally larger). These two heating methods are still very good, and friends who have not installed floor heating can try it. Thank you for your patience.

The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best! Peace and joy!

I bought a commercial house, one of which is not equipped with floor heating, how to solve it.

Dear, hello, I am happy to answer for you: I bought a commercial house, one of which is not laid with floor heating, how to solve the problemAnswer: See if there is an agreement between you and the developer in the contract, if it is written, the house is heated and there is no floor, you can claim that the other party is in breach of contract, and ask for rectification or compensation.

Floor heating is becoming more and more common in our daily life, but for some friends who have not installed floor heating, don't worry too much, you can use the following methods to heat: first.

First, the disadvantage of making a surface-mounted radiator is that you can see the gusset plate of the pipe, and you need to open a hole in the wall; Clause.

Second, the purchase of electric radiators, directly buried and installed can be used, the disadvantage is that the power load must be sufficient (the power of the electric radiator is as large as lead). These two heating methods are still very good, and friends who have not installed floor heating can try it. Thank you for your patience.

The above is all my reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best! Peace and joy!

Floor heating purchase contract is written yes, now I have rented a loss and made a lot of cabinets in the room, the rectification of the project is too big, how can I solve the problem of the attack on God through legal means, I feel that they have a fraudulent Zen early behavior.

You can go to court and sue.

1. The pipeline layout is uneven during construction. The construction of floor heating has a great impact on the heating effect, and the layout of the floor heating circuit of some households is unreasonable, which is the main reason for the poor effect. Cover contains.

Solution: Because the pipeline has already been arranged, it cannot be adjusted. The circulation of each circuit can be adjusted by the valve on the household water divider, and the adjustment can be adjusted to a uniform level, which can improve the heating effect.

2. In the process of the first operation of floor heating, because of the pressure and water resistance in the pipeline, the gas tank is plugged, and the water will not circulate and the temperature is not high in the end, and if the gas cannot be eliminated, it will affect the heat of the room. But here is a reminder that geothermal water can be put once or twice during the heating period. Here's how:

Materials required: a length of plastic water pipe, a basin for receiving water.

Close the main valve of the return water to prevent the water in the return pipe from flowing out.

For the water separator at home, only one way is left open, and the rest is turned off.

A water pipe is connected to the return water exhaust valve, the exhaust valve is unscrewed, and the water flowing out of the water pipe is connected to a small basin.

Continue to repeat the second step, turning off one line that has drained the water, turning on the other, and so on, until the hot water enters the underfloor heating pipe.

If you are worried that you are not operating properly, you can also directly let a professional person do the operation. Although you can also do your own waterproofing, you must pay attention to the proper method and do not waterproof too often, so as not to backfire.

3. The pressure of the floor heating pipeline is not enough. The floor where the user lives is too high or at the end of the heating in the residential area, and the pipe pressure is not enough, resulting in insufficient heating.

Solution: In this case, you need to find a heating company or property to solve, if you can't solve it, it is recommended to install a circulating pump to improve the circulation of hot water to achieve the ideal heating effect.

Summary. Dear, hello, I'm glad to answer for you, the developer's own floor heating system can be used directly, and there is no need to re-pave. Developers generally install and debug the floor heating system as one of the infrastructure during the construction process to ensure that the floor heating system can operate normally.

If you want to upgrade or retrofit your underfloor heating system, such as replacing it with more advanced underfloor heating equipment or extending the plumbing, you may need to re-lay the underfloor heating pipes or make adjustments to the plumbing. In this case, it is recommended that you ask a professional floor heating company or engineer to design and construct to ensure the stability and safety of the floor heating system. Dear, the above is mine, I hope these contents can help you, thank you for your understanding and support, I will continue to work hard.

Dear, hello, I'm glad to answer for you, the developer's own floor heating system can be used directly, and there is no need to re-pave. Developers generally install and debug the underfloor heating system as one of the infrastructure facilities during the construction process to ensure that the underfloor heating system can operate normally. If you want to upgrade or modify your underfloor heating system, such as replacing it with more advanced underfloor heating equipment or expanding the plumbing, you will need to re-install the underfloor heating pipes or make duct adjustments.

In this case, it is recommended that you ask a professional floor heating company or engineer to design and construct Qingju to ensure the stability and safety of the floor heating system. Dear, the above is mine, I hope these contents can help you, thank you for your understanding and support, I will continue to work hard.

The renovation of the old house, there was already floor heating, and the floor tiles were paved, and now I want to re-groove the old floor tiles, lay floor heating, and then lay the floor?

OK. The original one should also be replaced.

The original underfloor heating can't be used.

The original one is not needed, and the water separator is directly replaced.

OK. This belongs to the interior decoration and does not destroy the main structure, no problem.

Do you need to use cement to smooth the floor heating after it is laid? Does the shadow affect the height of the floor?

The original one must have been paved with cement.

Right. It can be designed to the original standard height.

It is good to lay it back with cement, it will not have an effect.

The reason why the room is not hot may be that the heat required by the room is greater than the heat released by the radiator, so you can increase the number of radiators to increase the heat released or enhance the insulation of the room, such as the window is made of double layers and so on!