Why can t you step on the brakes and accelerator when you learn to drive?

Of course, you have to apply the brakes, provided that you apply the clutch before you apply the brakes.

Generally, during the test, if the throttle cable is unplugged, use idle speed to prevent the speed from being too fast.

It's okay to turn off the ignition. As long as it doesn't go out, just stop there for a long time and don't move.

In other words, after the engine is turned off, you just need to start and reverse.

Reason: Reverse storage and transfer belong to the pile test, and the pile test is now tested by infrared and camera test car park.

The invigilator is not present, he just sits in the invigilator room and watches your upside down action on the computer.

The camera and infrared do not tell if you are going off during the operation, so the invigilator will not know if you are going off.

The most important thing is to start the car as soon as the engine is turned off and continue to operate.

The reason why you can't apply the brakes is that you need to use the clutch to control the speed of the car, because the test is limited to only 8 brakes, and you can get off after 8 times. Sealing the throttle is afraid that you will step on the accelerator as a brake in a panic, and of course the coach will carry the accident if there is an accident.

When parking, first press the clutch and then apply the brake, and the reverse pile is like this.

Not stepping on the accelerator is to make the car quite fast.

If you don't apply the brakes, you won't let the car stop.

When the speed is fast, novices may not be able to pour into the warehouse.

If the car stops for three seconds, it is also not qualified.

Not stepping on the accelerator is to make the car quite fast.

To be on the safe side.

Because the idle speed used when learning to reverse the pile, it is easy to stall if you do not step on the clutch and directly step on the brake. It is not necessary to pedal together when driving normally, and it is not recommended to pedal together.

Now the pile test is infrared monitoring, the clutch is to control the speed when the pile is reversed, because the focus of the pile is to control the speed, when the rear of the car just enters the garage door, if you step on the brakes, it will automatically turn off, at least we are here, I hope to help you.

When the clutch is not stepped on when the pile is moved, it is easy to rush forward due to the inertia of the car, and now there is no need to use the accelerator, and when the clutch is on the road, it only plays the role of a car start, and then the accelerator and brake can be used.

If you want to stop, you have to press the clutch on the brake, otherwise the ignition will be turned off. When driving, if you only reduce the speed slightly, you can only apply the brakes (light pedal), once the speed is reduced, you need to downshift, and naturally you need to step on the clutch.

If you don't press the clutch and only apply the brakes, the car stalls. When you reduce speed while driving, you can just apply the brakes, and when the speed drops, you need to press the clutch downshift.

If the speed is relatively fast, there is no need to step on the clutch. If the speed is relatively slow, press the clutch first, and then step on the brake, otherwise it will turn off. If you brake urgently, do not step on the clutch, because if you press the clutch, the speed will increase.

Especially when going downhill.

If the speed is fast, do not step on the clutch and then on the brakes, you should step on the brakes until the speed is slow (about 20 kilometers per hour) and then step on the clutch, if you don't want to stop, you don't have to step on the clutch, if you want to stop and then step on the clutch brake.

If you want to stop when the car is slow, press the clutch neutral before applying the brakes.

If you don't press the clutch brake, won't it turn off?

Now the pile test is infrared monitoring, the clutch is to control the speed when the pile is reversed, because the focus of the pile is to control the speed, when the rear of the car just enters the garage door, if you step on the brakes, it will automatically turn off, at least we are here, I hope to help you.

It is okay to stop and only step on the brakes when reversing the pile, but in the standard specifications, it is necessary to pay attention to the clutch when the brakes are pressed, and slowly step on the foot brakes until the car stops smoothly, so that the speed and body of the vehicle will not be affected.

Other Notes:

1. Generally start in 1st gear, don't hang up the wrong gear.

2. Don't turn the wrong direction of the steering wheel: play the wheel with both hands with both hands when sticking to the library, and hit the wheel with one hand with the left when reversing the library.

3. Lift the clutch slowly, never turn off the fire. Don't be afraid of slow jokes.

4. In the case of controlling the speed of the car, the faster the steering wheel is always better. When there is a contradiction between the two, the speed of the vehicle is controlled.

5. When stopping unexpectedly, you should also lift the clutch slowly, otherwise it will turn off.

6. Don't read the wrong stick. And strictly prevent the car from hitting the bar.

7. When the steering wheel is turned back, don't count the wrong number of laps.

8. Relax your mind and have a relaxed and casual attitude.

9. Wear thick-soled travel shoes.

Car Driving Start and Stop Essentials:

1. Start: 1. Get in the car, fasten your seat belt, and adjust the seat.

2. Quickly step on the clutch to the bottom and hang in 1st gear.

3. Turn the left turn signal, look at the surrounding situation (reversing mirrors on both sides), and release the handbrake.

2. Parking: 1. Lift the accelerator, press the clutch, and slowly press the foot brake (light and heavy process) until the car stops smoothly.

2. Pick up the gear and pull up the handbrake.

3. Lift the clutch and foot brake.

The correct step is to hang up the reverse gear reverse or 1st gear forward, lightly step on the clutch to control the speed, step on the brake and step on the clutch after the position, otherwise the clutch is not stepped on to death, it is easy to turn off after stepping on the brake, and if you hang forward or reverse gear, lift the brake, the car will go.

Because the speed of the car is very low during the test, if you don't step on the clutch after braking, it means that the clutch is still working.

Under normal circumstances, you can brake at a relatively low speed and then step on the clutch and then brake to death, but the emergency must be braking or braking!

When reversing the pile, it is recommended to apply the brakes and clutch together. Ensure that the parking is stable and prevent the brakes from being unstable when the brakes are not stepped on in place.

How to do it: Allow a short pause before preparing to enter the garage, and candidates can take the opportunity to look at the garage sideline from the rearview mirror to determine the angle of the steering wheel when reversing.

1. Make full use of a reference object at the front of the car, when the reference object is located in the middle or side of the road, it should be able to correctly feel the position of the vehicle, so as to determine the timing and amplitude of hitting the direction or returning direction;

2. It is necessary to make full use of the afterglow of the two eyes to overcome the phenomenon that the eyes look far away and ignore the near and cause the correction direction to be late;

3. Develop a good habit of not moving the steering wheel if the front of the car is not deflected. When correcting the direction, the word "timely" should be achieved, and the amplitude should be moderate, generally slightly earlier when returning to the correct direction, and the amplitude should be small;

4. Combined with field training, train the timing and speed of steering, such as figure-8, S-shaped and right-angle turns;

5. When the vehicle is driving on the right side, in order to prevent the car from skewing to the right, the steering wheel should be turned left to no swimming clearance, so that the left hand can feel the position of the vehicle at this time.