Can you still lay microcrystalline stone floor tiles after laying floor heating?

Good microcrystalline stone, such as the new source microcrystalline stone floor tiles after a high temperature of 1200 degrees for a long time firing, thermal stability is very good, the factory has undergone quenching and heating experiments before leaving the factory, considering the reason for thermal expansion and contraction, it is recommended to leave a seam of 2 3mm. Microcrystalline stone adopts the most cutting-edge technology in the ceramic industry, with the highest grade and the best decoration effect, and is an ideal choice for indoor high-grade bricks, especially wall tiles, please feel free to use.

OK. Laminate flooring: the thermal conductivity is moderate, but the heat storage capacity is strong, and the resistance to deformation is strong.

Stone and floor tiles: strong thermal conductivity, but weak heat storage capacity and strong resistance to deformation.

Some characteristics of floor heating solid wood flooring: good heat storage capacity, low moisture content, generally can also be applied to floor heating.

However, in general, solid wood flooring needs to be keeled, so the air between the floor and the ground is pure, and we know the air.

The heat is strongly insulated, so it is not easy for heat to be transferred to the surface. In addition, nailing can also pose a danger to buried pipes.

If it is home decoration, microcrystalline stone is not suitable for large-scale paving, because it is easy to wear and difficult to maintain. It is generally used for small area paving in the living room, and for the background wall, so that the grade is displayed. Microcrystalline stone has done well in the industry, such as Dongpeng, Xinzhongyuan, Eagle and so on.

Of course.

However, when choosing microcrystalline stone, you need to choose a good quality microcrystalline stone product. Simply put, microcrystalline stone is composed of two parts: a glass-ceramic composite layer on the surface and an all-ceramic embryo body.

Low-grade microcrystalline products, in addition to the poor texture clarity of the surface and the impurities of the glass-ceramic composite layer will affect the decorative effect, the bonding strength of the all-ceramic embryo body and the glass-ceramic composite layer is also poor, and the problem of cracking of the glass-ceramic layer is prone to occur in the later use process.

Yes, you have to protect it, or you don't smash a hole.

Yes, microcrystalline stone is sintered through a special process under a high temperature state similar to the formation conditions of granite, with uniform texture, high density, high hardness, compressive resistance, bending resistance, impact resistance and other properties better than natural stone, wear-resistant, not easy to be damaged, and there is no fine cracks common to natural stone, and the water absorption rate of microcrystalline stone is extremely low, almost zero, a variety of filthy slurry and dyeing solutions are not easy to invade and penetrate, and the dirt attached to the surface is also easy to remove and wipe clean, which is particularly convenient for the cleaning and maintenance of buildings. However, there are tiny pinholes on its surface, which also causes microcrystalline stone to appear dirty, but now there are also non-porous microcrystalline stones, and the landlord can go to the material mall to learn about it.

The wear resistance is poor, because the surface of microcrystalline stone is mostly vitreous, easy to grind, so it is not suitable for paving the ground on the occasion of the largest (home decoration due to good maintenance, it is easy to overcome this shortcoming. Engineering ground applications are more troublesome), so the use of microcrystalline stone is limited, and it is not recommended to be used for ground paving. The second polishing is difficult.

In addition, due to the fact that some manufacturers cut corners in the firing process of microcrystalline stone, the product cannot be polished for the second time, which to a certain extent also makes some users cautious when choosing microcrystalline stone for decoration. The color is rigid, the lack of change, and the natural beauty of natural stone is rare. Compared with natural stone, microcrystalline stone artificially controls the color difference, so that the color difference becomes extremely small, which is its advantage.

However, everything has two sides, and microcrystalline stone can not create the delicate, smart, elegant and decorative atmosphere of natural stone while pursuing uniformity, and it cannot achieve the harmony between nature and man.

First, returning to the supreme realm of simplicity and nature, this cannot but be said to be a great regret. By high temperature firing, large-size plates are easy to deform, and the flatness is worse than that of polished tiles, so it should be equipped with special paving workers, and the flatness problem can be overcome through effective construction. It is difficult to dry after cleaning, and the surface is smooth and clean, so it is easy to slip and has great safety risks.

Advantages and disadvantages of microcrystalline stone floor tiles? Microcrystalline stone tiles suitable for flooring? After reading the above introduction, I believe that friends should have a general understanding by now.

However, everyone has their own opinions on whether microcrystalline stone tiles are suitable for floor tiles, and they cannot be the same. When you buy tiles, don't blindly pursue the material, choose the right one for yourself.

Microcrystalline stone is mostly used for wall decoration, but some are also used for paving floors. If the floor is paved, special attention and protection are required during construction. It will be beautiful and high-end in later use.

During construction, cotton rolls can be used to pave the surface, and all gaps can be sealed with tape to prevent sand and dust from entering and scratching the floor tiles. The quality of microcrystalline stone tiles is very good, for all kinds of tiles, this style of ceramic tile belongs to a new type of product, it can meet the high-end decoration requirements, can enhance the taste of the decorator, and the effect is very good. Microcrystalline stone is a new type of decorative building material, in which the composite microcrystalline stone is called glass-ceramic composite plate, which is a layer of 3-5mm glass-ceramic composite on the surface of ceramic glass fossil, after secondary sintering completely integrated into a high-tech product.

Advantages: The appearance of microcrystalline stone tiles is very generous, giving people a noble and elegant feeling. Cons:

The scratches are more obvious, and the maintenance requirements are also very strict, if you don't pay attention to regular cleaning, it is easy to get dirty, giving people an unclean feeling.

Microcrystalline stone is actually a type of ceramic tile. At present, it is the most high-end category of ceramic tiles! Its core benefits are:

Bright (can reach 100 degrees of gloss, the same as the mirror), so use it as a decoration, high grade, can pretend to be luxurious! Of course, the more obvious the advantages, the more obvious the disadvantages, the biggest disadvantage is: the processing technology is very demanding.

Generally, ceramic tiles can be processed with ordinary blades, but if microcrystalline stone is to be processed, it needs to be processed by waterjet to achieve the best effect, and the processing cost is very high! During construction, the blade of ordinary masons cannot be cut (if it is barely cut, it will not be able to cut well, resulting in unnecessary loss); In addition, because it is too bright, it is easy to see a little scratch on the surface, that is to say, it is "not wear-resistant", so many people recommend microcrystalline stone on the wall as a background brick, but the ground is not recommended. Actually, this is misleading!

The appearance of microcrystalline stone is mainly caused by the construction process!