We all know that you need to wear a seatbelt when driving, how to wear a seatbelt correctly?

We all know that you have to wear a seatbelt when driving, what is the effect of a seatbelt?

1. The seat belt has a relative extension effect, which can buffer the deceleration effect.

2. Resist the deceleration during the collision, so that the passengers do not collide with the steering wheel, dashboard, windshield and other items twice, and maintain the safety of the passengers!

3. Prevent passengers from being thrown out of the car in a tight time. Pull on the handbrake and make sure the seatbelt is fastened.

We all know that you have to wear a seatbelt when driving, how to wear a seatbelt correctly?

One. Correct sitting posture.

1.The distance between the person and the steering wheel: the hands are stretched out, and the wrists of both hands can just be placed on the steering wheel, which is the most suitable distance.

2.Leg flexion: The leg is about 90 degrees flex, so that the leg is responsive when braking urgently. When a crash occurs, it also ensures that the legs are cushioned enough to avoid injuries to the cross and upper body.

3.Hands on the steering wheel: Keep your hands at the level of 9 and 3 o'clock to effectively control the car in a tight situation.

Two. Adjust your seat belt.

1.Grasp the buckle lock and deadbolt.

2.Slowly pull out the waist and shoulder harness.

3.Make sure the shoulder harness runs over the shoulder, close to the neck, and fits perfectly around the limb.

4.Make sure the lap belt is below the abdomen, preferably lower, and fits snugly around the limb.

5.Insert the seat belt buckle into the buckle lock and hear the sound of the buckle in to indicate that the operation is correct.

6.Make sure that after wearing the seat belt, it is okay to move left and right without feeling uncomfortable.

Three. How to fasten different types of seat belts.

Ordinary shoulder harnesses should be fastened over the shoulders, across the chest cavity, and should not be placed under the arms. It is recommended that the lumbar harness be worn lower, close to the lower part of the hip bone, not at the waist. The advantage of this operation is that the impact force will have an effect on the pelvic bones, which can ensure the stability of the human body.

Once the lap belt is tightened, it is recommended to pull the lap belt down at the buckle end and up at this point.

When wearing a seat belt, you should adjust the seat in advance, and then insert it into the safety buckle according to your height, fat and thin, and hard-working seat belt.

The correct way is to pull out the seatbelt and fasten the buckle in the buckle on the left side of the car seat, so that's how you wear your seatbelt.

The length of the seat belt should be adjusted to the appropriate position, and then buckled in the corresponding position, and when wearing the seat belt, be sure to understand the basic steps.

1. Check the seat belt and hold the D-ring buckle on the back of the seat belt to ensure that the webbing is not entangled.

2. Start wearing the seat belt and slide the seat belt through your arms to your shoulders. Ensure that all webbing is free of tangles and hangs freely. The shoulder straps must be kept vertical, not near the center of the body.

3. Grab the leg webbing and connect them with the buckles on the webbing on both sides of the buttocks. Thread the excess length of webbing into the adjustment ring.

4. The chest webbing connects the chest strap together through a slip-on buckle. The chest strap must be 15 cm below the shoulder, and the excess length of the webbing is threaded into the adjustment ring.

5. Adjust the seat belt. Shoulders: Adjust the webbing from the shoulders so that the height of the leg webbing is just below the hips and the D-ring on the back is between the shoulder blades.

Legs: Then adjust the leg webbing, try to do a single leg extension and a half squat, adjusting the length of the leg webbing on both sides. Chest:

The chest webbing should be crossed in the middle of the chest and about 3 hands wide away from the bottom of the chest.

Nowadays, many drivers wear seatbelts in a way that is simply unsightly. So what's the right way to do it? Today we will take a look at the correct way to fasten seat belts.

1.Adjust the seat and sit upright. Grab the deadbolt of the seat belt at the head of the seat, pull the seatbelt down with your body, don't let the belt kink, and then buckle the deadbolt into the buckle.

At this point, remember to pull the deadbolt again to confirm that the harness is fully locked. Do not tilt the back of the chair too much, otherwise the harness will not stretch and roll up properly. 2.

The fastening method of the seat belt in different positions. It is common to take a mountain harness over the shoulder, which should be worn over the shoulder, through the chest, and not under the arm. The belt should be fastened as low as possible, close to the lower part of the hip bone, not around the waist.

The advantage of this system is that in the event of a collision, the force of the collision will act on the bones of the pelvis, which can ensure the stability of the human body to the greatest extent. Once the belt is fastened, it is best to pull down the belt at the buckle end and pull the mid-rise shoulder strap at the same time. 3.

Don't let the seat belt press against hard or fragile objects, and don't put items such as glasses, keys, cell phones, etc., in your breast pockets.

Seat belts play a very important role in driving. For example, in the event of a traffic accident, the driver and passengers can be fixed in the seat without flying out, and the flying out here is due to inertia.

When the vehicle brakes sharply or hits an obstacle, it will "throw" everything in the car because of inertia, and the seat belt can firmly "grasp" the driver and passengers, without being "thrown out" and causing injury.

The invention of seat belts is to reduce the injury to the driver and passengers when the car brakes sharply or in a collision, and will protect the personnel, according to relevant information, the role of the car seat belt is far greater than the role of the airbag, so even if there is no airbag in the car, there will be a seat belt.

And the airbag can even cause injury to the person who is not wearing a seat belt, this is because the person who is not wearing a seat belt will move violently in the direction of the car when the car brakes quickly, and the airbag is very fast and the force is also very large, and the person who moves violently will collide with the airbag that is quickly deployed, in this case either the airbag ** or the airbag will eject the person in any possible direction, which is more dangerous.

So both the driver and the passenger should wear their seatbelts.

Seat belts shoulder belt area and belt area, we should use seat belts correctly when driving, riding.

Moreover, China's traffic law stipulates that seat belts must be used in accordance with the regulations during driving, which is not only a provision for drivers, but also for passengers in the car should use seat belts according to regulations. The law is hard and fast to say, which shows how important the role of seat belts is in the process of driving.

Seat belt = life belt

According to research, the correct use of seat belts can reduce the fatality rate of drivers and passengers by 57 percent in frontal collision accidents, 44 percent in side collision accidents, and 80 percent in rollover accidents.

The main protective functions of seat belts are as follows:

1. It can effectively prevent the driver and passengers from throwing out of the car.

2. It forms an effective deceleration when fighting a collision, and reduces the probability of secondary collision between the driver and the steering wheel, dashboard, windshield, etc.

3. Rear passengers who use seat belts will not cause injury to the front passengers.

Seat belt = life belt, wearing a seat belt while driving is an important matter to ensure your own safety, driving a motor vehicle without wearing a safety belt is very dangerous and illegal. In the event of a collision, emergency braking or rollover, seat belts can hold the occupants in their seats, effectively reducing accident injuries and saving lives when it matters most. Statistics show that the use of seat belts reduces the risk of injury to drivers and front passengers by 40 to 50 percent, and the risk of fatal injuries to rear passengers by 25 to 75 percent.

American scientists, who advocate the use of seatbelts while driving, have studied hundreds of crashes that have killed drivers and found that it takes a car traveling at 88 kilometers per hour to go from crashing to killing the driver in a fraction of a second.

After several years of publicity and education and the mandatory requirements of laws and regulations, there are fewer and fewer people who do not wear seat belts in the driver's seat and passenger seat, but the rear seat belts are still ignored by everyone. In fact, this is a serious misunderstanding of the problem, whether it is the front row or the back row, not wearing a seat belt may bring fatal injury, seat belts and condoms, are life-saving tools, the text is always white, let everyone look at the group data, intuitively feel the importance of the rear seat belt!

1. The probability of fatal injury is as high as 35% if the rear seat does not wear a seat belt in a traffic accident.

2. The faster the speed, the greater the impact force borne by the rear row. The collision occurred at a speed of only 40 km/h, and the impact on the human body was equivalent to falling vertically on the concrete floor from a height of 6 meters without wearing a rear seat belt.

3. If you fasten your seat belts (including the rear seat belts), your chances of survival will increase by 60%.

4. Standardize the use of seat belts, which can save 30,000 lives in one year.

Because the speed of the car is generally very fast, if there is a person or a car in front of you and you need to brake suddenly, the huge inertia will make people rush forward, so you need a seat belt to fix the driver and prevent accidents.

1. First of all, you have to see whether the seat belt is in good condition, that is, check the safety of the seat belt, when you gently pull out the seat belt, it can be retracted, pulled out at once, it will not be pulled, so it is safe.

2. When you get into the car, first adjust your sitting posture and move yourself to a position where you feel comfortable driving, generally speaking, the best distance is to hold the steering wheel with both hands outstretched.

3. The next step is to fasten the seat belt, gently pull out the seat belt, cross it from the shoulder, close to the neck, and buckle the seat belt into the buckle lock until you hear the sound of the lock.

4. After the seat belt is fastened, it can not be too tight or too loose, and it is advisable to leave two fingers, especially for pregnant women, when wearing the seat belt, you can not strangle the stomach, and avoid the protruding part of the stomach, otherwise it will be very dangerous.

The role of the seat belt:

When the car encounters an unexpected situation and brakes urgently, it can bind the driver and passengers to the seat to avoid rushing forward, thus protecting the driver and passengers from injuries caused by secondary collisions.

The ideal seatbelt action process is:

First of all, tighten in time and do not hesitate to put people at the first moment of an accident"Press"On the seat. Then, relax moderately, and when the peak impact force has passed, or the person can be protected by the airbag, the seat belt is properly relaxed. Avoid rib injuries due to excessive tension.

Pull out the seat belt from the side, usually the seat belt is automatically retracted.

I don't know if you can read it. Remember to pull slowly, otherwise it will get stuck.

If you don't wear a seatbelt while driving, that's what happens in the event of a collision.

1. The function of the seat belt is to prevent the occupants from hitting the hardware in the car during the accident and causing fatal damage, and the accident will not occur in practice, because the reaction time is absolutely insufficient, unless the occupants have intended to cause an accident, know the time of impact and jump out of the car in advance, the person who did not buckle the seat belt after the accident will collide with the internal parts of the car or be thrown out of the car during the collision to cause fatal injury or serious injury, even if there is no seat belt restraint, it will be unable to escape because it has been killed or injured too badly, On the contrary, the person who fastened the seat belt was protected and did not directly hit him, and was able to remain awake and act.

2. Escape by unfastening the seat belt, generally people who do not buckle the seat belt in a car accident have a high probability of direct death, there is no chance of escape, although the operation of the seat belt is troublesome, but generally because it is still alive and not seriously injured, there is also the ability to escape.

As long as the car is moving, it must be tied.