Is there a waste paper compressor? There is no low pressure in the waste paper baler

Some. <>

Waste paper compressors are widely used in all kinds of printing plants, plastic factories, waste paper factories, hardware factories, old goods companies and other units and enterprises, suitable for the packaging and processing of old things, waste paper, plastics, etc., is to improve labor efficiency, reduce labor intensity, save manpower.

The waste paper compressor should be operated and maintained by a special person, turn off the main power supply after work every day, clean up the foreign objects around the machine, clean up the foreign objects in the machine, and add appropriate lubricating oil to the active position to reduce the wear and tear of the machine.

Regularly check whether the screws of each part of the machine are loose, and the new machine is easy to loosen the parts: small flange screws in the central shaft and four large screws in the pressure plate, which should be reinforced regularly.

Safety precautions for use:

Before starting to pack, first check whether the doors are closed, whether the door lock is buckled in place, whether the knife and scissors are buckled, and whether the safety chain is buckled on the handle. Do not pack any of the above parts if they are not buckled to avoid accidents.

When the machine is running, stand next to the machine and do not stick your head, hands and body parts out of the door to avoid crushing.

The waste paper compressor is actually the same as the waste paper baler! It is used for the compression and packaging of waste paper, garbage and other waste products!

If we work for a long time, we will choose to rest for appropriate adjustments, in fact, the waste paper baler is the same, in order to maintain a good use effect of the machine, this is inseparable from the daily maintenance of the waste paper baler. Today, I will share with you a few maintenance tips.

1.To clean regularly, to keep the waste paper baler clean inside and outside, the sliding surface, chain, rack, oil pump, oil holes and other places without oil stains, often check whether there is oil leakage in each part, and clean up the chips and debris around the baler in time during normal work.

2.It is necessary to refuel or change the oil on time, so that the oil is not continuous, there can be no dry friction, the oil pressure is normal, the oil mark is bright, the oil path is smooth, and the oil quality of the hydraulic oil meets the requirements of the cylinder; Check whether there is a lack of oil in the knife set and the slide plate, if there is a lack of oil, you can use the dipping method to refuel, dip it in oil with a small stick, slowly drip on it, and cannot pour it directly, which will flow into the belt rail, which will cause the packing belt to slip.

3.Before starting the machine, check whether the parts of the baler are in good condition, whether the screws and nuts are loose, and tighten them in time.

Baler**.

Please check whether the power supply and plug of the waste paper baler are normal, make sure that the power supply is connected correctly, and there is no loosening or damage, 2Low-voltage switch failure: Please check whether the low-voltage switch of the waste paper baler is normal, if you find that there is a problem with the switch, you need to replace the new switch, 3

Hydraulic system failure: the waste paper baler uses the hydraulic system to work, if the hydraulic system failure will affect the normal operation of low pressure, you can check whether the hydraulic oil is less or leaking, and whether the hydraulic pipeline is blocked, etc., 4Low pressure sensor failure:

Please check whether the low pressure sensor of the waste paper baler is working properly, if it fails, you need to replace it with a new sensor. 5.Other failures:

If none of the above conditions exist, it is possible that other unknown faults cause the low voltage to fail, and you can seek professional help from the after-sales service department. In a word, if the waste paper baler does not have low voltage, first of all, you need to check whether the main components such as power supply, plug and low voltage switch are normal. If there is no problem with any of the above parts, further inspection and troubleshooting are required.

It is recommended to read the relevant operation manual carefully or consult a professional before operating the first imitation waste paper baler to avoid unnecessary failures.

[Sell scrap and go to the scrap home, I'll come to your problem].

Here's how to use it:

Tool raw materials: manual waste paper compressor, waste paper.

1.Turn the manual packing compressor to the right.

2.Install garbage bags in the manual compressor pressure bin, and buckle the garbage bags to prevent the garbage bags from falling off during the process of compressing waste paper.

3.After doing this, put the garbage and waste paper into the compression bin until the bin is full.

4.Turn the pressing plate back to directly above the pressing bin, pull the positioning element apart, and the pressing plate is automatically compressed.

5.After the pressure plate compresses the garbage and waste paper into place, manually rotate the compression return to position.

6.After the pressing plate is set in position, open the lock of the bin and remove the compressed garbage bag from the press bin, and complete the operation of compressing garbage and waste use of the manual baler.

The main reasons for the abnormal pressure of the waste paper baler are:

1. The oil filter is blocked, the liquid flow channel is too small, and the oil viscosity is too high, so that the oil cannot be absorbed.

2. The viscosity of the system oil is too low and the leakage is serious. Excessive air ingress into the oil, as well as high levels of contamination.

3. The motor power is insufficient and the speed is too low. The tubing is connected incorrectly. The pressure gauge is damaged.

If the hydraulic oil has not been changed for a long time, it is recommended to check this first and then consider the problem of oil filter clogging.

The waste paper baler does not have low voltage, which may be caused by the failure of the circuit of the waste paper baler or the failure of some components, such as solenoid valves, contactors, relays, etc. Here are some possible ways to troubleshoot:1

Check whether the power line of the waste paper baler is normal. Check whether the power supply line connection is loose or damaged, and at the same time use a multimeter to perform a voltage test to check whether the voltage output of the power supply is normal. 2.

Check whether the wiring of the low-voltage circuit of the waste paper baler is normal. Confirm whether the wiring of solenoid valves, blind contactors, relays and other components is loose or poorly contacted, and replace or adjust them as necessary. 3.

Check if the fuse of the low-voltage circuit is blown out. The waste paper baler is usually powered by DC power supply, check whether the low-voltage circuit fuse of the waste paper baler is blown out, and replace the fuse of the correct power if necessary. 4.

Check whether the low-voltage controller of the waste paper baler is normal. If a voltmeter is available, it can measure whether the voltage output by the low-voltage controller is normal and whether there is any abnormality. 5.

If there is no problem with the above links, it may be caused by the failure of the internal components of the equipment control board, and professional technicians are required to repair or replace them. The above is a possible investigation method, it is recommended to remain vigilant and pay attention to safety during the operation, if there are unclear details or specific problems, it is recommended to consult the professional grinding personnel of electrical maintenance.