Hanging heating is mixed with floor heating, what should I do if the floor heating is not hot

Then the landlord means that the radiator is hot, and the system of mixing floor heating and radiator is the first thing to pay attention to is exhaust to prevent air infiltration. This kind of mixing system is logically ineffective with radiators. The landlord clearly indicates the connection between the radiator and the floor heating.

There is a process of geothermal heating, you wait for two days, if it still doesn't work, you have to adjust the flow rate of hanging heating appropriately.

See if it's not debugged.

We're going to mix it up with water, and I don't know how you guys deal with it.

How so? Generally, the radiator is not hot, and your home installation muddy water device is not, so call a professional to clean the pipe.

Underfloor heating should be dredged and cleaned regularly, preferably once every two or three years.

The hanging piece and the floor heating can not be used in the same house, to be exact, the heating method can only choose one of them, because the hanging piece will rob the water, which will cause the floor heating is not hot.

Radiators can be installed if the floor heating is not hot.

Causes and methods of floor heating not heating:

1. The floor is too high and the pipeline pressure is not enough.

The floor is too high or at the end of the water supply in the community, the pressure in the pipeline is not large enough, and the speed of the water flow will be directly reduced, which will lead to insufficient hot water in the pipeline.

Solution: You can first find the property and heating company to solve the problem, if you can't solve it, you can consider buying a circulating pump to improve the circulation of hot water, which will generally be improved.

2. The floor heating has not been cleaned for a long time.

The floor heating is not hot due to untimely maintenance and inadequate, because of long-term use, it is easy to accumulate scale or silt in the water pipe, and if it is not cleaned regularly, it will be attached to the inner wall of the pipeline, and the situation of blockage will occur, affecting the normal use of floor heating.

Solution: Maintain regularly, but don't do it yourself to clean up the floor heating, and find a professional cleaning company that is more reliable.

3. The floor heating filter is blocked.

If the main water supply bar is not hot, it may be because the water quality is too poor or too dirty, so that the filter is clogged, which affects the normal circulation of the system.

Solution: Close the water supply valve and return valve first, then open the filter to clean the filter inside, and finally install it back. If the operation is not good and you are afraid of damaging the filter, you can find a professional to clean it.

4. The water pipe is in direct contact with the back of the floor, the contact point is too small, the heat conduction effect is poor, and the temperature cannot be raised.

Solution: On this basis, a thickness of not less than 30mm of bean stone concrete should be laid to expand the contact surface between the floor and the pipeline.

5. Wood is a poor conductor, and the use of ultra-thick substrate products will lead to a decrease in room temperature.

Solution: The recommended thickness of wood flooring is: laminate flooring 7-8mm, composite solid wood 12-15mm, cork flooring 4-5mm.

Hello, the ground is messy and the radiator is mixed with the floor heating is not hot, and the indoor insulation is not good. 1. Caused by heating gas plugs. If you can't find it, you can take turns to ask professionals to come to repair.

It is caused by the air lock, first screw on the exhaust valve on the top of the radiator to exhaust the air, and then open the exhaust valve to exhaust the air in the pipeline. Close the valve when there is water flowing out. 2. Indoor insulation is not good.

If the walls are not insulated, especially in the south, and many doors and windows are not sealed, air leaks in the gaps in the winter, and even if the heating is turned on, it will be discharged to the outside. At this time, the insulation can be installed on the wall or ceiling, which can not only keep warm, but also insulate in summer.

The floor heating is not hot, which may be caused by problems such as pipe blockage, Zen dispersion and water leakage, which will produce uneven heating and not heat, etc., and it is difficult to measure the location of blockage and water leakage by traditional methods. You can try to use the thermal imaging meter to check the direction of the floor heating line, and at the same time, you can measure the floor heating temperature, which is convenient to share the floor heating situation with the maintenance master and the heating company.

<> the above picture, the valves on the water separator and the stupid water collector are open, and the temperature in the house is 28 degrees, indicating that the floor heating system is operating normally. Now the outdoor temperature is not too low, so the temperature of the heating circulating water is also relatively low, now look at your heating no problem.

Reasons why floor heating is not hot - pipe cavity refers to the phenomenon that the pressure is not enough and the floor heating is not hot: some owners have too high floors or are not heated in the round file community, and the pipe pressure is not auspicious enough, resulting in unsatisfactory heating.

There is no problem with your floor heating, the house is 28 degrees and you can already open the window to sleep, the floor and floor tiles are worse than the Ling itself, so the closed Wang Pei is not hot and the car is very normal, the rightmost valve should be the exhaust valve under the pipe should be used for exhaust.

This situation is very easy to solve, you put the other three roads off Weihuai, with pliers only screw this way, you must listen carefully to screw to that position out of the water, this kind of ball valve and refers to Fu You does not have to screw to the position of the hall waiter.

The pressure of the pipeline is not strong enough and the phenomenon of no heat: because the residential floor of some users is too high, or it is located at the end of the district heating, the pipe pressure is not strong enough, resulting in the heating effect is not obvious. Solution:

First of all, find a heating company or property to coordinate, can not solve, it is recommended to install a circulating pump to improve the circulation of hot water to achieve the ideal.

2.There is gas in the pipeline: if there is heat in the main floor heating bar and the return bar is not hot, it is because there is gas in the pipeline, which will cause the hot water to not enter the return bar for circulation. Solution: Use.

3.The uneven circuit is not hot: in the same community, other heating users have good heating effects, but their own heating is not hot, which belongs to floor heating.

The heating of the geothermal Lingbu is not hot, which means that the pipeline is not smooth, and there is a place where the transportation is slow and blocked? The easiest way. It is to open the mold mouth next to the drain and add water to see if there is a problem with the circulation system? If you can cycle it. There should be no problem.

This is the problem of the floor heating company, you call ** to ask the person in charge of the floor heating company, he is in charge of repair.

The one on the far right is closed, and the others are all open, and it's fine.

A circulating pump can be added to increase the pressure of the radiator. It is better to install on the family type and inlet, and the pump is not easy to evacuate, and is conducive to reducing resistance. If the inlet pressure is high, it can also be installed on the return pipe to reduce the operating temperature of the pump.

When the pressure of the pipes increases, the water flow speed increases, which increases the circulation speed, increases the heat release from the floor heating, and warms the house.

If the heating duct is placed throughout the summer, it may accumulate a little bit of air, which will cause poor circulation. Generally speaking, if the inlet pipe is particularly hot, but the outlet pipe is not hot, it is usually due to poor circulation, because the air is accumulated, resulting in hot water can not enter the circuit alternately. Workaround:

Open the hidden air release valve on the water diverter to vent until there is hot water coming out normally.

The floor heating is not warm, you can clean the floor heating pipes, it is estimated that it is blocked, and the circulation is not good.

There is an air blockage in the underfloor heating pipes. See if there is an air blockage in the pipeline, if so, then you can close the return valve, and then open the exhaust valve on the return water, close each valve on the inlet water first, and then open the exhaust all the way.

Caused by non-removal of fouling. If all the water is not released at the end of the heating period, after the end of the heating period every year, the user should discharge all the boiler pipe water in the floor heating pipe network, otherwise the long-term fouling and unclear cavity cultivation will cause the flow rate to be reduced, the medium bright water is not smooth, and the heat conduction efficiency is reduced, resulting in the blockage of the pipe network.