A headphone sign appeared on the phone indicating how to remove it

Here are a few things you can try:

If you unplug the earphone, it will automatically jump to the external mode, and the earphone symbol will also be canceled.

2.The metal piece of the headphone jack is in place, and the headphone jack is dialed with a refill to bounce the metal piece inside.

3.Clean up the garbage on your phone, turn off the virus, reboot, if it still doesn't work, back up the files, and restore the phone to factory settings.

4.If it still doesn't work, that is, the circuit in the speaker is damaged due to collision and falling, it is recommended to send it for repair.

There are many reasons for the headphone mode, the first is that the headphone jack is soldered, and the welding can be good, the second is that the motherboard CPU is faulty, and it can't be switched back, which is more troublesome, and the third is that it is damp, there is a short circuit, and it may be good to blow it down with a hair dryer. Software issues are almost impossible! Hope it helps.

1. If it is a plugged earphone, unplug the earphone. 2. If it is not plugged in, restart it.

If the mobile phone is dropped or entered, the earphone cable inside is short-circuited, so you need to disassemble and clean it.

1. In this case, the hole of the mobile phone plugged into the headset enters something, making the system think that the mobile phone is plugged into the headset. You can dip the tampon in some alcohol and clean up the place where the headphones are plugged in.

2. In this case, it is also possible that there is a problem with the system, back up the data of the mobile phone, and restore it again, and the system may be restored.

3. The worst case is that there is a problem with the hardware, which is not easy to repair, it is recommended to take it to the after-sales service, and let the staff check that there is a problem there, so as to better replace the parts.

Summary. The earphone icon in the upper right corner of the phone means that the phone is in headphone mode, and you can cancel it by unplugging the earphone.

1. First of all, when the mobile phone is connected, the earphone can open the shortcut option interface.

2. Then click to turn off the Bluetooth function on the interface that opens, as shown in the figure below.

3. Disconnect from the earphones.

4. Or open the settings interface and turn on the Bluetooth option.

5. Connect here to turn off the pairing with the earphones. Click the headset option pop-up interface and select OK to disconnect.

How to turn off the headset logo in the upper right corner of the phone.

The earphone icon in the upper right corner of the phone means that the phone is in headphone mode, and you can cancel it by unplugging the earphone. 1. First of all, when the mobile phone is connected, the earphone can open the shortcut option interface. 2. Then click to turn off the Bluetooth function on the interface that opens, as shown in the figure below.

3. Disconnect from the earphones. 4. Or open the settings interface and turn on the Bluetooth option. 5. Connect here to turn off the pairing with the earphones.

Click the headset option pop-up interface and select OK to disconnect.

Hope mine is helpful to you.

The steps to cancel the headphone mode on the phone are as follows:

1.First, find the [Settings] app on the desktop, and click to enter the settings management page.

2.Then in the [Settings] page, scroll the page to find the option [Smart Assist], and click on it to enter the new settings page.

3.In the management page of [Smart Assist], find the option of [Smart Line Control] and click this option to enter the management page of headphone mode.

4.After entering the [Smart Line Remote] mode, the page shows that the Smart Line Remote has turned on the support for the [Headphone Mode] of the mobile phone.

5.On the page, turn off the switch on the right side of [Smart Line Remote] to successfully cancel the headset mode of the mobile phone.

2. After pulling it out, there is still a headset logo, which can be unplugged with the earphone many times, and it can be rotated at multiple angles.

3. Try another earphone;

4. Restart the phone to see if it can be recovered;

5. It may be that the metal piece of the headphone jack is in place, and the metal piece is dialed with the refill to bounce the metal piece back.

6. The headphone jack is stained with stains, wipe it with a cotton swab dipped in alcohol.

There is a headphone logo on the phone, in this case, it may be that the headphone jack of the phone is short-circuited, and you can use the headphone head. Plug and unplug it several times repeatedly, see if it can be solved, if it still doesn't work, you can restart the phone to try, and then you can go to the after-sales service to test the phone.

You may choose the headphone mode, you can change the mode to normal mode in the settings, and you're good to go.

If you are using a Huawei phone and the earphone icon is displayed on the headphone interface without plugging in the headphones, there are many reasons for this phenomenon, such as liquids, moisture, dust, etc., or whether the earphones are standard or not, which may affect the function of the earphone jack. Here's how you can try to solve it:

1. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal.

2. If there is still a headset icon after plugging and unplugging the earphones, please restart the phone to try whether it will return to normal.

3. If you try to plug in and unplug the earphones and restart, there is still a headphone icon display:

1) Please check whether there is liquid, moisture, or dust near the headphone jack, which may affect the function of the headphone jack.

2) Please confirm whether you are using a non-standard one-turn multi-turn charging cable or earphone adapter cable, using a non-standard one-turn multi-transfer charging cable or earphone adapter cable may not be compatible with the mobile phone, resulting in the abnormal display of the earphone icon, it is recommended that you use the standard charging cable or earphone adapter cable.

4. If the above methods do not solve your problem, please back up your data in advance (third-party communication apps need to be backed up separately) and bring your purchase voucher to a nearby Huawei customer service center for testing.

How to remove the headphone pattern on the mobile phone screen?

If you're talking about a small headphone icon at the top of the screen, this is the phone's headphone mode, which will only appear when you plug in the headphones or connect the Bluetooth headphones.

If you don't plug in the headphones, you restart the phone to see, sometimes it will return to normal after restarting the phone.

If the headphones are not plugged in, but there are icons. You can see if there's anything in the headphone jack and then take your headphones and plug them in a few times.

If it's useless, you can take your phone to after-sales.

If the mobile phone is plugged into a wired earphone, the headset logo will appear under normal circumstances, just unplug the wired earphone; If you are connected to a Bluetooth headset, turn off the Bluetooth in your phone. If there is no headset connected, it may be that the phone is malfunctioning, you can restart it first. If restarting doesn't solve the problem, you can check to see if there is a foreign object in the headphone jack.

Or try to flick the metal piece in the hole to see if the metal piece is displaced.

It should be the phone's headphone jack that is broken.,I'm really helping you look forward to adoption,

It is possible that the headphone jack of the mobile phone has entered the water, and it is recommended to repair it.