What disinfectant is used for disinfection of water dispensers, and what disinfectant is used to dis

You can use alcohol to disinfect the water dispenser, first remove the external water collection tank, and then use tweezers to wipe the body, water outlet, water control tank and switch button of the water dispenser with cotton dipped in alcohol, which can achieve disinfection and sterilization. However, there will be a trace amount of disinfectant residue after disinfection of the water dispenser, so it is not recommended to drink it immediately, and you need to put away some of the water before drinking.

What are the precautions when using the water dispenser:

1. First of all, the water dispenser should move upright as much as possible when handling, and should not be tilted. Moreover, the action is handled with care, and it should be placed in a stable place after moving to the destination, so it is recommended to stop for a period of time before opening and using.

2. Secondly, when using the water dispenser for the first time, all parts of the water dispenser should be cleaned, and then the bottle of water should be enlarged, and the hot water faucet should be turned on until the water flows out, and then the power supply can be plugged in. Otherwise, it is easy to cause the problem of dry burning of water dispensers.

3. If the water dispenser has not been used for a long time, unplug the power plug, unscrew the residual water in the drain valve drain center, and then tighten the drain valve, pay attention not to be scalded by hot water. And when you fall asleep at night, it is best to turn off the power of the water dispenser, which not only saves power, but also is safer.

4. Finally, the water dispenser should be placed in a ventilated place every day, not humid or sunshine. And it is best to place the water dispenser at a distance of 15 cm from furniture or other electrical appliances to avoid splashing water and damaging the furniture.

How to disinfect household water dispensers.

The first step of the sterilizer: unplug the power plug, remove the bucket, turn on the drinking water switch, and put the remaining water in the cavity of the water dispenser.

Expert Comment: The first step in disinfection of the water dispenser is to release all the remaining water in the cavity of the water dispenser. However, when we open the tap of the water dispenser, we can only release a small part of the water, so there is a big disadvantage in this method.

Correct method: Open the sewage pipe behind the water dispenser first and drain the remaining water. Because the remaining water in the sewage pipe is the key to the secondary pollution of the water dispenser, and then, turn on all the drinking water switches to release water.

Step 2: Use forceps.

Clamp the alcohol cotton and carefully scrub the inside and outside of the water dispenser liner and lid.

Step 3: Pour 300 into the inner bowl of the water dispenser

ml of multipurpose disinfectant, soak for 10-15 minutes.

Expert comment: The capacity of the cavity of the water dispenser is 2

liters or so, a mere 300

Milliliter disinfectant can only disinfect the extremely limited space in the inner cavity of the water dispenser, and such disinfection is ineffective. Do: Place 300

Dissolve the disinfectant to 2

liter about the water, then fill the entire cavity, leave for 10-15 minutes.

Step 4: Turn on the drinking water switch and drain the disinfectant.

Expert Analysis; As mentioned above, the drinking water switch can only release a part of the disinfectant, and most of it remains in the cavity, which will become a new source of water pollution if it is not drained. Correct method: Turn on all the switches of the water dispenser, including the sewage pipe and drinking water switch, and drain the disinfectant.

Step 5: Rinse the entire water dispenser cavity with 1000ml of water, then turn on all the switches of the water dispenser to release water.

Comment: Rinsing with 1000ml of water is not enough, it will cause the disinfectant to remain in the water dispenser.

Correct method: Continuously rinse the entire cavity of the water dispenser with 7 8 liters of clean water, and turn on all switches to drain the flushing liquid.

Step 6: Use a rag to scrub the back wall of the water dispenser switch.

Expert Comment: When using a cup to hold water, it is easy to touch the back wall of the water dispenser switch, so it is not just a simple decontamination treatment here. Correct method: Scrub the back wall of the switch with alcohol cotton.

End posture: Put the bottled water, the disinfection staff turn on the switch, put a glass of water and drink it all, indicating that the user can drink it with confidence.

Expert analysis: After the disinfection of the water dispenser, there may be a trace of disinfectant residue, and it cannot be drunk immediately. Do: Put a glass of water and smell for chlorine.

Taste. If so, put water in it until you can't smell chlorine before you can drink it safely.

Postscript: According to Director Guo's analysis, the disinfection level of this "professional" personnel is obviously unqualified. Later, when the relevant personnel of this company heard about this, they couldn't help but be shocked:

I didn't expect the disinfection of professionals to be so "professional"! Under the guidance of Director Guo, they decided to strengthen management, so that disinfection is thorough and services are in place. This article is published in this journal to provide readers with the correct way to disinfect themselves, and perhaps also to supervise the needs of professional disinfectants.

What disinfectant is used to disinfect water dispensers: Water dispensers can be disinfected with alcohol. Remove the external water collection tank first, and then wipe the body, water outlet, water control tank and switch button of the water dispenser with tweezers with cotton dipped in alcohol.

Achieve disinfection and sterilization. However, there will be a small amount of disinfectant after the water dispenser is disinfected.

Water dispensers can be disinfected with alcohol.

Use tweezers to hold the alcohol and cotton and carefully scrub the inner tank of the water dispenser. The inner liner of the water dispenser is prone to the accumulation of bacteria due to direct contact with the air. Scrubbing with alcohol can remove the dirt on the banquet and prepare for the next step of disinfection.

Note that after the water dispenser is disinfected, there may be a trace amount of disinfectant residue and cannot be drunk immediately. You should put a glass of water in the first place and smell for chlorine. If there is, you should put the water again until you can no longer smell the chlorine smell before you can drink it safely.

Water dispenser disinfection with pin is very crucial, especially in the current situation, where people pay more attention to hygiene and health. Therefore, it is very important to disinfect the water dispenser regularly. Therefore, this article will introduce some methods of disinfection of water dispensers to ensure the safety and hygiene of drinking stupid water.

1.Use a depresser.

This is one of the most commonly used methods of disinfection of water dispensers. There are various tablets available in the market, which contain a substance called hydrogen peroxide, which is effective in destroying bacteria and viruses in water dispensers. According to the manufacturer's requirements, add the medicine to the water, stir well, and pour it into the water dispenser, then wait for the disinfection time to end, discharge the water, and finally put it in clean water and wash it.

2.Use a disinfectant.

Disinfectant is a substance made of chlorine dioxide that has a strong disinfecting effect. Compared to tablets, disinfectants are more convenient and efficient. First of all, drain the water in the water dispenser, then add an appropriate amount of disinfectant, apply it evenly inside the water dispenser, and leave it for a certain period of time (generally recommended about 15-30 minutes), drain the water and add water to rinse several times.

3.Use high-temperature sterilization.

High-temperature dropper slag poison is also a common disinfection method. You only need to drain the water in the water dispenser and soak it in hot water. It is generally recommended to control the temperature at around 70-80 degrees Celsius for 20-30 minutes.

High-temperature hot water can effectively kill bacteria and viruses in the water dispenser, while also removing dirt and sediment from the inside of the water dispenser.

In conclusion, disinfection of water dispensers is very important to ensure the hygiene and safety of drinking water. The above disinfection methods can achieve the effect of eliminating bacteria and viruses in the water dispenser. However, it should be noted that the disinfection process needs to strictly adhere to the manufacturer's operating specifications, while also paying attention to personal health and safety.

Therefore, before carrying out disinfection, it is necessary to understand the type and structure of the water dispenser, and pay attention to the situation during the disinfection process at any time. This ensures the effectiveness and safety of disinfection operations.